SM700 POWERBOX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Constant voltage and constant current operation Parallel operation master/slave EMC standard EN61204-3 Excellent response to load change CE marked Optional ethernet, RS232, IEEE 488 programming Natural convectional cooling OPERATING Efficiency 87%–89% . Switching frequency 100kHz Thermal protection Yes Programming Analogue Programming of voltage and current by 0-5V. Programming speed See table Master/Slave operation Parallel and series operation with equal current and voltage sharing. In this way two or more SM- units can together be used as one high power unit. Voltage and current of the units is controlled by the master (by potentiometers or by programming). Series operation up to 600V Metering Digital meters standard Indicators CV/CC mode, OVP triggered LEDs MTBF 500,000hrs BATTERY CHARGING The CV/CC regulated power supplies are suitable for battery charging. Ask for the special datasheet “BATTERY CHARGING WITH SM-series POWER SUPPLIES”. This datasheet contains information about protective measures against accidental battery reversing. ENVIRONMENTAL Operating temperature -20°C to 50°C Humidity 95% RH max, non condensing, up to 40 °C. 75% RH max, non condensing, up to 50 °C. Storage temperature -40°C to 85°C Cooling Natural convection STANDARDS AND APPROVALS Safety standards EN60950 / EN61010 EMC standards EN61204-3, EN61000-6-2 EMI standards EN61000-6-3 (EN55022B) MECHANICAL Mounting Bench or 19" rack mounting Specifications INPUT Input voltage 90-132/185-265VAC Frequency 48Hz–62Hz Inrush current 6.5A @ 230Vac, 30A @ 110Vac. Insulation Input – Output: 3750V rms (8mm creepage) Input – Case: 2500V rms Output – Case: 600VDC OUTPUT Output voltage See table Output voltage adjustment 0%–100% Output current See table Output current adjustment 0%–100% Resolution 0.03% voltage and current control with 10 turn potentiometers. Overvoltage protection SM1540-D: 0-17V, SM7020-D: 0-80V, SM3004-D: 0-350V. Overload protection Yes Short circuit protection Yes Temperature coefficient CV: 5x10-5 per °C, CC: 1x10-4 per °C. Load regulation 0%–100% load see table. Line regulation Line ±10% – see table. Ripple & Noise See table. Stability CV: 3x10-4, CC: 1x10-3 Output impedance (0-100kHz) SM1540: <40mΩ, SM7020: <60mΩ, SM3004: < 700mΩ. Recovery time (50%–100% load step): 100µS; 150µS for SM 7020. Remote sense 2V max. per lead compensation.
Your dependable power partner – www.powerbox.com.au 465 LABORATORY SM 700 Series 600-700 WATTS PROGRAMMABLE DC SUPPLY MODEL NUMBER OUTPUT VOLTAGE (0V TO) OUTPUT CURRENT (0A TO) RIPPLE & NOISE CV CC PROGRAMMING SPEED (0V TO V MAX.) LOAD REG. 0%–100% CV CC LINE REG. 200-264VAC CV CC SM 1540D 15V 40A 10mV pk-pk 25mA pk-pk 18mS 5mV 25mA 5mV 25mA SM 7020D 35V 20A 15mV pk-pk 15mA pk-pk 12mS(0-35V) 5mV 12mA 5mV 12mA 70V 10A 40mS(0-70V) SM 3004D 150V 4A 50mV pk-pk 3mA pk-pk 14mS(0-150V) 20mV 3mA 20mV 3mA 300V 2A 60mS(0-300V) Selection Table OPTIONS Screwdriver adjustment - option P001 Master / slave operation Battery charging SM7020-D: P021, SM3004-D: P022. Increased max. output voltage / current - option P069 Enforced secondary isolation 1000V - option P089 Power sink for 2 quadrant operation - option P140 / 141 External ISO AMP for isolated analog programming - ISO AMP Module External ethernet power supply controller - option PSC ETH EXT External RS232 power suply controller - option PSC 232 EXT External IEEE488 power supply controller - PSC 488 EXT Technical Illustrations