SM5Z

SM5Z10A LUGUANG | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

Optimized glass passivated chip PACKAGE OUTLINE DIMENSIONS millimeters Recommended Mounting Pad Layout 11.0 9.5 15.8 3.5 3.0 3.3 http://www.lgesemi .com mai l:lge@lgesemi.comRevision:20170701-P1

Min (V) Max (V) I T (mA) SM5Z10A 11.1 12.3 5.0 15 250 212 17.0 SM5Z11A 12.2 13.5 5.0 10 150 198 18.2 SM5Z12A 13.3 14.7 5.0 10 150 181 19.9 SM5Z13A 14.4 15.9 5.0 10 150 167 21.5 SM5Z14A 15.6 17.2 5.0 10 150 155 23.2 SM5Z15A 16.7 18.5 5.0 10 150 148 24.4 SM5Z16A 17.8 19.7 5.0 10 150 138 26.0 SM5Z17A 18.9 20.9 5.0 10 150 130 27.6 SM5Z18A 20.0 22.1 5.0 10 150 123 29.2 SM5Z20A 22.2 24.5 5.0 10 150 111 32.4 SM5Z22A 24.4 26.9 5.0 10 150 101 35.5 SM5Z24A 26.7 29.5 5.0 10 150 93 38.9 SM5Z26A 28.9 31.9 5.0 10 150 86 42.1 SM5Z28A 31.1 34.4 5.0 10 150 79 45.4 SM5Z30A 33.3 36.8 5.0 10 150 74 48.4 SM5Z33A 36.7 40.6 5.0 10 150 68 53.3 SM5Z36A 40.0 44.2 5.0 10 150 62 58.1 SM5Z40A 44.4 49.1 5.0 10 150 56 64.5 SM5Z43A 47.8 52.8 5.0 10 150 52 69.4 1.Surge current waveform is defined at 10/1000uS waveform 2.For all types maximum VF = 2.0 V at IF = 100 A measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum NOTE: Electrical Characteristics(T A =25 ɗ unless otherwise noted) Part Number (Uni) Breakdown Voltage V BR T Maximum Reverse Leakage I R RWM (uA) Maximum I R RWM T J =175 (uA) Working Peak Reverse Voltage V RWM (V) Maximu m Reverse Surge Current I PP (A) (1) Maximum Clamping Voltage V C PP (V) Automotive Protection SM5Z Series Surface Mount Transient Voltage Suppressors http://www.lgesemi .com mai l:lge@lgesemi.comRevision:20170701-P1 AMBIE N AVERAGE FORWARD CURRENT, (A) 0 100 25 100 175 0 0 0 0.2 ## 0.5 76 1 50 1.5 33 2 23 3 13 4 10 0 5 1 6600 25 5 10 2800 ## 0 100 1100 10 5200 100 1900 Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve Ratings and Characteristics Curves (T A =25ɗ unless otherwise noted) Fig. 1 - Pulse Derating Curve Fig. 2 - Pulse Waveform 0.0 2.0 4.0 6.0 8.0 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) Lead Temperature , T L (ɗ) 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,T A (ɗ) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) 10/1000 ȝsec. Waveform Peak Value (Ipp) td T r =10ȝs Half Value = Ipp T J = 25 ƱC Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 1000 10000 10 100 Pulse Width ,t d (ms) Peak Power (W)

B MIN. C 1.5 (0.059) 13.5 ± 0.50 (0.53 ± 0.02) 150 ɗ 200 ɗ 60-180 sec ɗ /sec >220 ɗ 245 ɗ 60-150 sec ɗ /sec 10-30 sec ɗ /sec njo 280 ɗ Time within actual peak temp. Ramp down Rate Time(25 ɗ to Peak temp.) Do not exceed Ramp up rate (150-200 ɗ Reflow Liquidus Temp. Peak Temp. Time(Liq. to Peak) Ramp up rate (220-200 ɗ Recommended Soldering Parameters IR-Reflow Condition Pre Heat Temp. min Temp. max Time(min to max) 30.4 (1.197) SURFACE MOUNT TAPE AND REEL PACKAGIN G DIMENSIONS in millimeters (inches) TAPE SIZE A MAX. D MIN. N MIN. G MAX. T MAX. 24 mm (0.945) 330 ± 2.0 (13.0 ± 0.079) 178 ± 2.0 (7.0 ± 0.079) 20.2 (0.795) t p t s Perheat T s(min) T s(max) T L t L T P Ramp-up Time(t) Temp from 25 °C to Peak Temperature(T) B D C ZONE 1 ZONE1 A N G T Automotive Protection SM5Z Series Surface Mount Transient Voltage Suppressors http://www.lgesemi .com mai l:lge@lgesemi.comRevision:20170701-P1