SM5391-BBE-S-001-000 SMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Silicon Microstructures, Inc. 2001-2018. All rights reserved. DOC # 40DS5304.00 SM5391-BBE-S-001-000 Differential Pressure Sensor Page 1 No. Characteristic Symbol Minimum Typical Maximum Units 1 Supply Voltage VDD 3.0 3.3 3.6 V 2 Supply Current IDD 4.5 mA
3 Calibration Pressure PMIN / PMAX -1 1 psi
4 Compensated Temperature TCOMP -20 85 °C
5 Digital Pressure Output
-26214 Counts
6 Digital Pressure Output
7 Digital Full Scale Span DFS
8 Resolution (Digital Output)
9 Update Rate 2000 S/sec
10 Bandwidth BW 125 Hz
11 Digital Output Accuracy DACC -1 +1 %FS
12 Analog Pressure Output
%VDD
13 Analog Pressure Output
%VDD
14 Analog Full Scale Span AFS
%VDD 15 Analog Output Accuracy AACC -1.5 +1.5 %FS Pin No. Pin function Pin No. Pin function
1 NC 9 NC
2 NC 10 SDA
3 NC 11 SCL
4 VSS 12 NC
5 VDD 13 NC
6 VOUT
(analog output) 14 NC
7 NC 15 NC
8 NC 16 NC
The SM5391-BBE-S-001-000 is a 16-bit digital & analog, low pressure MEMS sensor offering state -of-the-art pressure transducer technology and CMOS mixed signal processing technology to produce a differential , fully conditioned , multi -order pressure and temperature compensated sensor in JEDEC standard SOIC-16 package with dual horizontal ports. The complete datasheet (40DS5860) and I2C Application Note (40AN 7000) will be also available by contacting SMI Sales at (408) 577-0100 or sales@si-micro.com. Part number SM5391-BBE-S-001-000 is shipped in sticks and part number SM5391-BBE-T-001-000 is shipped in Tape and Reel. Sensor Specification All parameters are specified at VDD = 3.3 V DC supply voltage at 25⁰C, unless otherwise noted. Connection Circuit Specification Pinout table *For package dimension information, please refer to the complete datasheet. 100 nF