SM5350 SILICONMITUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Features

 Drives up to Three Strings of 10 Series LEDs  11-bit Programmable Dimming Resolution  Exponential or Linear Brightness Control  PWM Brightness Control for CABC Operation  Internal Soft-Start Limits Inrush Current  Wide 2.7 V to 5.5 V Input Voltage Range  Adaptive Headroom Control  Selectable Boost Frequency of 500 kH or 1 MHz.  12-Bump WLCSP Package  Protections . Programmable 16 V / 24 V / 32 V / 35.5 V Overvoltage Protection . LED Open / Short Circuit Protection . Thermal Shutdown . Current Limit

Applications

 Mobile and Smart Phones LCD Backlight  Tablets LCD Backlight  Portable Devices LCD Backlight

Description

The SM5350 is a current mode boost converter which supplies the power and controls current in up to three strings of 8 LEDs per string. Programming is done over an I2C-compatible interface. The maximum LED current is adjustable from 5 mA to 29.8 mA. At any given maximum LED current the LED brightness is further adjusted with exponential or linear dimming steps. Additionally, pulsed width modulation (PWM) brightness control can be enabled allowing for LED current adjustment by a logic level PWM signal. The boost switching frequency is programmable at 500 kHz for low switching loss performance or 1 MHz to allow the use of tiny low-profile inductors. Overvoltage protection is programmable at 16 V, 24 V, 32 V, or 35.5 V to accommodate a wide variety of LED configurations and Schottky diode/output capacitor combinations. The SM5350 is available in a 12-bump WLCSP package. Device Information Part Package Size SM5350 12 WLCSP 1.61 mm x 1.26 mm Simplified Block Diagram Silicon Mitus cannot assume any responsibility for the consequence of use of information furnished nor for any infringement of patents or other rights of third parties which may result from its use. No Circuit patent licenses are implied. Silicon Mitus reserves t he right to change the circuitry and specifications without notice at any time. This publication supersedes and replaces all information previously supplied. Silicon Mitus products are not authorized for use as critical components in life support devices or systems without the express writt en approval of Silicon Mitus. © 2017 Silicon Mitus, Inc. - Printed in Korea - All Rights Reserved