SM5006AHBS

Nippon Precision Circui...

Crystal Oscillator Module ICs

Manufacturer: Nippon Precision Circui...

Document: 18 Pages / 185Kb

Request Quote Download Datasheet Read online HTML view

More from Nippon Precision Circui... Browse S parts

Online Datasheet

Read SM5006AHBS online.

SM5006 NPC | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 18

Technical content

NIPPON PRECISION CIRCUITS—1 NIPPON PRECISION CIRCUITS INC. Crystal Oscillator Module ICs OVERVIEW The SM5006 series are crystal oscillator module ICs, that incorporate high-frequency, low current consump- tion oscillator and output buffer circuits. Highly accurate thin-ﬁlm feedback resistors and high-frequency capacitors are built-in, eliminating the need for external components to make a stable 3rd-harmonic oscillator.

FEATURES

I Up to 107 MHz operation I Capacitors C G , C D built-in I Inverter ampliﬁer feedback resistor built-in I TTL input level I 16 mA (V DD = 4.5 V) drive capability I 4 mA (V DD = 4.5 V) drive capability (5006AH I Output three-state function I 2.7 to 5.5 V supply voltage I Oscillator frequency output I 8-pin SOP (SM5006 ××× I Chip form (CF5006 ××× SERIES CONFIGURATION Note: Recommended oper ating frequency is not the guar anteed v alue but is measured using NPC’s standard cr ystal. Version *1. Chip form devices have designation CF5006 ××× gm ratio 3V operating 5V operating Built-in capacitance R f Ω Input level Output duty level Output load (max) [pF] Recommended operating frequency range [MHz] Output load (max) [pF] Recommended operating frequency range [MHz] Output waveform t r f [ns] *2. 5006 N : C L = 50pF , CMOS load 5006 K : C L = 15pF , 10TTL load 5006AH : C L = 15pF , CMOS load C G [pF] C D [pF] SM5006ANAS 0.5 50 2 2 t o 3 0 8 / 8 8 16 8 . 2 TTL CMOS SM5006ANBS 1 50 3 0 t o 4 0 8 / 8 8 16 5 . 6 TTL CMOS SM5006ANCS 2 15 22 to 30 50 40 to 60 7/7 8 16 4.9 TTL CMOS SM5006ANDS 2 15 30 to 50 50 50 to 70 7/7 8 16 2.6 TTL CMOS SM5006ANES 3 15 50 to 70 30 7 0 t o 1 0 0 6 / 6 8 16 2 . 6 TTL CMOS(15) *3. SOP pac kage only SM5006ANFS 4 30 8 0 t o 1 0 7 6 / 6 8 16 2 . 6 TTL CMOS(15) SM5006CNCS 2 15 22 to 30 15 40 to 60 8 / 8 8 16 4 . 9 TTL CMOS50 40 to 50 SM5006CNDS 2 15 30 to 40 15 50 to 70 8/8 8 16 2.6 TTL CMOS SM5006CNES 3 15 50 to 70 15 70 to 100 7/7 8 16 2.6 TTL CMOS SM5006BNCS 2 15 22 to 70 15 22 to 100 7 / 7 8 16 No TTL CMOS50 22 to 70 SM5006BNES 3 15 22 to 70 30 7 0 t o 1 0 7 6 / 6 8 16 No TTL CMOS(15) SM5006DNCS 2 15 22 to 40 15 22 to 70 8 / 8 8 16 No TTL CMOS50 22 to 50 SM5006DNES 3 15 22 to 70 15 22 to 100 7 / 7 8 16 No TTL CMOS50 22 to 70 SM5006AKAS 0.5 15 22 to 30 4/4 8 16 8.2 TTL TTL SM5006AKBS 1 15 30 to 40 4/4 8 16 5.6 TTL TTL SM5006AKCS 2 15 40 to 60 4/4 8 16 4.9 TTL TTL SM5006AKDS 2 15 50 to 70 4/4 8 16 2.6 TTL TTL SM5006CKDS 2 15 50 to 70 4/4 8 16 2.6 TTL TTL SM5006BKCS 2 15 22 to 70 4/4 8 16 No TTL TTL SM5006DKCS 2 15 22 to 70 4/4 8 16 No TTL TTL SM5006AHAS 0.5 15 2 2 t o 3 0 7 / 7 8 16 8 . 2 TTL CMOS SM5006AHBS 1 15 3 0 t o 4 0 7 / 7 8 16 5 . 6 TTL CMOS SM5006AHCS 2 15 4 0 t o 6 0 7 / 7 8 16 4 . 9 TTL CMOS SM5006AHDS 2 15 5 0 t o 7 0 7 / 7 8 16 2 . 6 TTL CMOS

NIPPON PRECISION CIRCUITS—2

ORDERING INFORMATION

(Unit:mm) 8-pin SOP Device Package SM5006 ××× S 8-pin SOP CF5006 ××× –1 Chip form 4.4 0.2 1.5 0.1 0.05 0.05 0.4 0.2 5.2 0.3 0.4 0.1 0.15 + 0.1− 0.05 0 to 10 6.2 0.3 0.695typ 1.27 0.12 M 0.10

NIPPON PRECISION CIRCUITS—3 PAD LAYOUT (Unit: µ PINOUT (Top view) PIN DESCRIPTION and PAD DIMENSIONS BLOCK DIAGRAM Chip size: 0.92 1.31 mm Chip thic kness: 300 ± 30 µm Chip base: V DD level QVDD XT VSS(0,0) (920,1310) X Y INH XT HA5006 1 XT VSS Q VDD 3 NC NC 006 XT INH Number Name I/O Description Pad dimensions [µm] XY 1I N H I Output state control input. High impedance when LOW. Pull-up resistor b uilt in 195 212 2 XT I Ampliﬁer input. Crystal oscillator connection pins. Crystal oscillator connected betw een XT and XT 385 212 3X T O Ampliﬁer output. 575 212

4 VSS – Ground 766 212

5 Q O Output. Output frequency (f O ) 765 1152

6 NC – No connection – –

7 NC – No connection – –

8 VDD – Supply voltage 162 1152

Q CG CD Rf XT INH RG RD

NIPPON PRECISION CIRCUITS—4 SPECIFICATIONS Absolute Maximum Ratings V SS = 0 V Parameter Symbol Condition Rating Unit Supply v oltage r ange V DD 0.5 to 7.0 V Input voltage r ange V IN 0.5 to V DD + 0.5 V Output v oltage r ange V OUT 0.5 to V DD + 0.5 V Operating temper ature r ange T opr 40 to 85 C Storage temper ature r ange T stg Chip form 65 to 150 C 8-pin SOP 55 to 125 Output current I OUT 5006 N K mA 5006AH Pow er dissipation P D 8-pin SOP 500 m W

NIPPON PRECISION CIRCUITS—5 Recommended Operating Conditions SM5006 series (package form) V SS = 0 V Parameter Symbol Series Condition Rating Unit min typ max Supply v oltage V DD ANA, ANB, CNC, CND, DNC f 50MHz, C L 50pF 4.5 – 5.5 Vf 70MHz, C L 15pF 4.5 – 5.5 f 40MHz, C L 15pF 2.7 – 3.6 ANC, AND, BNC, CNE, DNE f 70MHz, C L 50pF 4.5 – 5.5 V f 100MHz, C L 15pF 4.5 – 5.5 f 50MHz, C L 15pF 2.7 – 3.6 f 70MHz, C L 15pF 3.0 – 3.6 ANE, ANF , BNE f 100MHz, C L 15pF 4.5 – 5.5 V f 107MHz, C L 15pF 4.5 – 5.5 f 50MHz, C L 15pF 2.7 – 3.6 f 70MHz, C L 15pF 3.0 – 3.6 AKA, AKB, AKC, CKD, DKC f 70MHz, C L 15pF 4.5 – 5.5 V AKD, BKC f 70MHz, C L 15pF 4.5 – 5.5 V AHA, AHB, AHC, AHD f 70MHz, C L 15pF 4.5 – 5.5 V Input v oltage V IN All series V SS DD V Operating temperature T OPR ANA, ANB, CNC, CND, DNC f 50MHz, C L 50pF , 4.5 V DD 5.5 40 – Cf ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 0 – + 70 f ≤ 40MHz, C L = 15pF , 2.7 ≤ V DD ≤ 3.6 − 10 – + 70 ANC, AND, BNC, CNE, DNE f ≤ 50MHz, C L = 50pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 80 f ≤ 70MHz, C L = 50pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 100MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 0 – + 70 f ≤ 50MHz, C L = 15pF , 2.7 ≤ V DD ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF , 3.0 ≤ V DD ≤ 3.6 − 20 – + 80 ANE, ANF , BNE f ≤ 70MHz, C L = 50pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 f ≤ 100MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 107MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF , 2.7 ≤ V DD ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF , 3.0 ≤ V DD ≤ 3.6 − 20 – + 80 AKA, AKB, AKC, CKD, DKC f ≤ 50MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 0 – + 70 AKD, BKC f ≤ 50MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 AHA, AHB, AHC, AHD f ≤ 50MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 15 – + 75

NIPPON PRECISION CIRCUITS—6 CF5006 series (chip form) VSS = 0 V Parameter Symbol Series Condition Rating Unit min typ max Supply v oltage V DD ANA, ANB, CNC, CND, DNC f ≤ 50MHz, C L = 50pF 4.5 – 5.5 Vf ≤ 70MHz, C L = 15pF 4.5 – 5.5 f ≤ 40MHz, C L = 15pF 2.7 – 3.6 ANC, AND, BNC, CNE, DNE f ≤ 70MHz, C L = 50pF 4.5 – 5.5 V f ≤ 100MHz, C L = 15pF 4.5 – 5.5 f ≤ 50MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 15pF 3.0 – 3.6 ANE, ANF , BNE f ≤ 70MHz, C L = 50pF 4.5 – 5.5 V f ≤ 107MHz, C L = 30pF 4.5 – 5.5 f ≤ 50MHz, C L = 15pF 2.7 – 3.6 f ≤ 70MHz, C L = 15pF 3.0 – 3.6 AKA, AKB, AKC, CKD, DKC f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V AKD, BKC f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V AHA, AHB, AHC, AHD f ≤ 70MHz, C L = 15pF 4.5 – 5.5 V Input v oltage V IN All series V SS –V DD V Operating temperature T OPR ANA, ANB, CNC, CND, DNC f ≤ 50MHz, C L = 50pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 °Cf ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 15 – + 75 f ≤ 40MHz, C L = 15pF , 2.7 ≤ V DD ≤ 3.6 − 10 – + 70 ANC, AND, BNC, CNE, DNE f ≤ 70MHz, C L = 50pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 100MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF , 2.7 ≤ V DD ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF , 3.0 ≤ V DD ≤ 3.6 − 20 – + 80 ANE, ANF , BNE f ≤ 70MHz, C L = 50pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 100MHz, C L = 30pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 107MHz, C L = 30pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 f ≤ 50MHz, C L = 15pF , 2.7 ≤ V DD ≤ 3.6 − 20 – + 80 f ≤ 70MHz, C L = 15pF , 3.0 ≤ V DD ≤ 3.6 − 20 – + 80 AKA, AKB, AKC, CKD, DKC f ≤ 50MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 15 – + 75 AKD, BKC f ≤ 50MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80 AHA, AHB, AHC, AHD f ≤ 50MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 40 – + 85 f ≤ 70MHz, C L = 15pF , 4.5 ≤ V DD ≤ 5.5 − 20 – + 80

NIPPON PRECISION CIRCUITS—7

Electrical Characteristics

3V operation: V DD = 2.7 to 3.6 V , V SS = 0 V , Ta = 20 to 80 C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max HIGH-level output v oltage V OH Q: Measurement cct 1, V DD = 2.7 V, I OH = 8 m A 2.2 2.4 – V LOW -level output v oltage V OL Q: Measurement cct 2, V DD = 2.7 V, I OL = 8 m A – 0.3 0.4 V Output leakage current I Z Q: Measurement cct 2, INH = LOW , V DD = 5.5 V V OH = V DD –– 1 0 µA V OL = V SS –– 1 0 HIGH-level input v oltage V IH INH 2.0 – – V LOW -level input v oltage V IL INH – – 0.5 V Current consumption I DD INH = open, Measurement cct 3, load cct 1, V DD = 3.0 to 3.6 V, C L = 15 pF f = 30 MHz SM5006ANCS CF5006ANC SM5006BNCS CF5006BNC –8 1 6 mA f = 30 MHz, Ta = –10 to 70 C SM5006CNCS CF5006CNC –8 1 6 f = 50 MHz SM5006ANDS CF5006AND –1 3 2 6 f = 70 MHz SM5006BNES CF5006BNE SM5006CNES CF5006CNE SM5006DNES CF5006DNE –1 5 3 0 f = 40 MHz, Ta = –10 to 70 C SM5006CNDS CF5006CND SM5006DNCS CF5006DNC –1 1 2 2 f = 70 MHz SM5006ANES CF5006ANE SM5006ANFS CF5006ANF –2 0 4 0 INH pull-up resistance R UP Measurement cct 4 50 – 150 k Ω Feedback resistance R f Measurement cct 5 SM5006ANAS, CF5006ANA 6.97 8.2 9.43 k Ω SM5006ANBS, CF5006ANB 4.76 5.6 6.44 SM5006ANCS, CF5006ANC SM5006CNCS, CF5006CNC 4.16 4.9 5.64 SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006CNDS, CF5006CND SM5006CNES, CF5006CNE 2.21 2.6 2.99 Built-in resistance R G Design value, deter mined by the R f value 17 20 23 Ω R D Design value, deter mined by the R f value 17 20 23 Built-in capacitance C G Design value, deter mined by the inter nal wafer pattern 7.44 8 8.56 pF C D Design value, deter mined by the inter nal wafer pattern 14.88 16 17.12

NIPPON PRECISION CIRCUITS—8 5V operation: V DD = 4.5 to 5.5 V , V SS = 0 V , Ta = 40 to 85 C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max HIGH-level output v oltage V OH Q: Measurement cct 1, V DD = 4.5 V, I OH = 16 m A 4.0 4.2 – V LOW -level output v oltage V OL Q: Measurement cct 2, V DD = 4.5 V, I OL = 16 m A – 0.3 0.4 V Output leakage current I Z Q: Measurement cct 2, INH = LOW , V DD = 5.5 V V OH = V DD –– 1 0 µA V OL = V SS –– 1 0 HIGH-level input v oltage V IH INH 2.0 – – V LOW -level input v oltage V IL INH – – 0.8 V Current consumption I DD INH = open, Measurement cct 3, load cct 1, V DD = 4.5 to 5.5 V, C L = 50 pF f = 30 MHz SM5006ANAS CF5006ANA –1 8 3 5 mA f = 40 MHz SM5006ANBS CF5006ANB –2 0 4 0 f = 60 MHz CF5006ANC – 30 60 f = 60 MHz, Ta = –20 to 80 C SM5006ANCS – 30 50 f = 70 MHz CF5006AND CF5006BNC –4 0 8 0 f = 70 MHz, Ta = –20 to 80 C SM5006ANDS SM5006BNCS –4 0 7 0 INH = open, Measurement cct 3, load cct 1, V DD = 4.5 to 5.5 V f = 60 MHz, C L = 15 pF, Ta = –15 to 75 C CF5006CNC – 28 50 f = 60 MHz, C L = 15 pF, Ta = 0 to 70 C SM5006CNCS – 28 50 f = 70 MHz, C L = 15 pF, Ta = –15 to 75 C CF5006CND CF5006DNC –3 5 6 5 f = 70 MHz, C L = 15 pF, Ta = 0 to 70 C SM5006CNDS SM5006DNCS –3 5 6 5 f = 100 MHz, C L = 15 pF, Ta = –20 to 80 C CF5006CNE CF5006DNE –4 5 8 0 f = 100 MHz, C L = 15 pF, Ta = 0 to 70 C SM5006CNES SM5006DNES –4 5 8 0 f = 100 MHz, C L = 30 pF CF5006ANE – 50 100 f = 100 MHz, C L = 15 pF SM5006ANES – 45 90 f = 107 MHz, C L = 30 pF, Ta = –20 to 80 C CF5006ANF CF5006BNE – 60 100 f = 107 MHz, C L = 15 pF, Ta = –20 to 80 C SM5006ANFS SM5006BNES –5 0 9 0 INH pull-up resistance R UP Measurement cct 4 50 – 150 k Ω Feedback resistance R f Measurement cct 5 SM5006ANAS, CF5006ANA 6.97 8.2 9.43 k Ω SM5006ANBS, CF5006ANB 4.76 5.6 6.44 SM5006ANCS, CF5006ANC SM5006CNCS, CF5006CNC 4.16 4.9 5.64 SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006CNDS, CF5006CND SM5006CNES, CF5006CNE 2.21 2.6 2.99 Built-in resistance R G Design value, deter mined by the R f value 17 20 23 Ω R D Design value, deter mined by the R f value 17 20 23 Built-in capacitance C G Design value, deter mined by the inter nal wafer pattern 7.44 8 8.56 pF C D Design value, deter mined by the inter nal wafer pattern 14.88 16 17.12

NIPPON PRECISION CIRCUITS—9 5006×K series VDD = 4.5 to 5.5 V , VSS = 0 V , Ta = −40 to 85 °C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max HIGH-level output v oltage V OH Q: Measurement cct 1, V DD = 4.5 V, IOH = 16 m A SM5006AKAS, CF5006AKA SM5006AKBS, CF5006AKB SM5006AKCS, CF5006AKC SM5006CKDS, CF5006CKD SM5006DKCS, CF5006DKC 3.9 4.2 – V SM5006AKDS, CF5006AKD SM5006BKCS, CF5006BKC 4.0 4.2 – LOW -level output v oltage V OL Q: Measurement cct 2, V DD = 4.5 V, I OL = 16 m A – 0.3 0.4 V Output leakage current I Z Q: Measurement cct 2, INH = LOW , V DD = 5.5 V V OH = V DD –– 1 0 µA V OL = V SS –– 1 0 HIGH-level input v oltage V IH INH 2.0 – – V LOW -level input v oltage V IL INH – – 0.8 V Current consumption I DD INH = open, Measurement cct 3, load cct 1, V DD = 4.5 to 5.5 V, C L = 15 pF f = 30 MHz SM5006AKAS CF5006AKA –1 6 3 2 mA f = 40 MHz SM5006AKBS CF5006AKB –1 8 3 6 f = 60 MHz, Ta = –15 to 75 °C CF5006AKC CF5006DKC –2 5 5 0 f = 60 MHz, Ta = 0 to 70 °C SM5006AKCS SM5006DKCS –2 5 5 0 f = 70 MHz, Ta = –20 to 80 °C CF5006AKD CF5006BKC –3 5 7 0 f = 70 MHz, Ta = –15 to 75 °C CF5006CKD – 35 70 f = 70 MHz, Ta = 0 to 70 °C SM5006AKDS SM5006BKCS SM5006CKDS –3 5 7 0 INH pull-up resistance R UP Measurement cct 4 50 – 150 k Ω Feedback resistance R f Measurement cct 5 SM5006AKAS, CF5006AKA 6.97 8.2 9.43 kΩ SM5006AKBS, CF5006AKB 4.76 5.6 6.44 SM5006AKCS, CF5006AKC 4.16 4.9 5.64 SM5006AKDS, CF5006AKD SM5006CKDS, CF5006CKD 2.21 2.6 2.99 Built-in resistance R G Design value, deter mined by the R f value 17 20 23 Ω R D Design value, deter mined by the R f value 17 20 23 Built-in capacitance C G Design value, deter mined by the inter nal wafer pattern 7.44 8 8.56 pF C D Design value, deter mined by the inter nal wafer pattern 14.88 16 17.12

NIPPON PRECISION CIRCUITS—10 5006AH series VDD = 4.5 to 5.5 V , VSS = 0 V , Ta = −40 to 85 °C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max HIGH-level output v oltage V OH Q: Measurement cct 1, V DD = 4.5 V, I OH = 4 m A 3.9 4.2 – V LOW -level output v oltage V OL Q: Measurement cct 2, V DD = 4.5 V, I OL = 4 m A – 0.3 0.5 V Output leakage current I Z Q: Measurement cct 2, INH = LOW , V DD = 5.5 V V OH = V DD –– 1 0 µA V OL = V SS –– 1 0 HIGH-level input v oltage V IH INH 2.0 – – V LOW -level input v oltage V IL INH – – 0.8 V Current consumption I DD INH = open, Measurement cct 3, load cct 1, V DD = 4.5 to 5.5 V, C L = 15 pF f = 30 MHz SM5006AHAS CF5006AHA –1 5 3 0 mA f = 40 MHz SM5006AHBS CF5006AHB –1 8 3 6 f = 60 MHz, Ta = –20 to 80 °C CF5006AHC – 25 50 f = 60 MHz, Ta = –15 to 75 °C SM5006AHCS – 25 50 f = 70 MHz, Ta = –20 to 80 °C CF5006AHD – 32 65 f = 70 MHz, Ta = –15 to 75 °C SM5006AHDS – 32 65 INH pull-up resistance R UP Measurement cct 4 50 – 150 k Ω Feedback resistance R f Measurement cct 5 SM5006AHAS, CF5006AHA 6.97 8.2 9.43 kΩ SM5006AHBS, CF5006AHB 4.76 5.6 6.44 SM5006AHCS, CF5006AHC 4.16 4.9 5.64 SM5006AHDS, CF5006AHD 2.21 2.6 2.99 Built-in resistance R G Design value, deter mined by the R f value 17 20 23 Ω R D Design value, deter mined by the R f value 17 20 23 Built-in capacitance C G Design value, deter mined by the inter nal wafer pattern 7.44 8 8.56 pF C D Design value, deter mined by the inter nal wafer pattern 14.88 16 17.12

NIPPON PRECISION CIRCUITS—11 Switching Characteristics 5006×N series 3V operation: VDD = 2.7 to 3.6 V , VSS = 0 V , Ta = −20 to 80 °C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max Output rise time tr1 Measurement cct 3, load cct 1, 0.1V DD to 0.9V DD , C L = 15 pF, Ta = –10 to 70 °C SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 3.5 7.0 ns tr2 Measurement cct 3, load cct 1, 0.1V DD to 0.9V DD , C L = 15 pF SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006BNCS, CF5006BNC SM5006BNES, CF5006BNE SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 3.5 7.0 Output f all time tf1 Measurement cct 3, load cct 1, 0.9V DD to 0.1V DD , C L = 15 pF, Ta = –10 to 70 °C SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 3.5 7.0 ns tf2 Measurement cct 3, load cct 1, 0.9V DD to 0.1V DD , C L = 15 pF SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006BNCS, CF5006BNC SM5006BNES, CF5006BNE SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 3.5 7.0 Output duty cycle *1 *1. Deter mined by the lot monitor. Duty Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 3.3 V, C L = 15 pF, f = 30MHz SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006ANCS, CF5006ANC SM5006CNCS, CF5006CNC 4 0–6 0 Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 3.3 V, C L = 15 pF, f = 40MHz SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC 4 0–6 0 Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 3.3 V, C L = 15 pF, f = 50MHz SM5006ANDS, CF5006AND SM5006BNCS, CF5006BNC 4 0–6 0 Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 3.3 V, C L = 15 pF, f = 70MHz SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006BNES, CF5006BNE SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE 4 0–6 0 Output disable delay time t PLZ Measurement cct 3, load cct 1, Ta = 25 °C, VDD = 5 V, C L ≤ 15 pF – – 100 ns Output enable delay time t PZL – – 100 ns

NIPPON PRECISION CIRCUITS—12 5V operation: VDD = 4.5 to 5.5 V , VSS = 0 V , Ta = −40 to 85 °C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max Output rise time tr1 Measurement cct 3, load cct 1, 0.1V DD to 0.9V DD , C L = 15 pF SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 2.0 4.0 ns SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006BNCS, CF5006BNC SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 1.5 3.0 tr2 Measurement cct 3, load cct 1, 0.1V DD to 0.9V DD , C L = 30 pF CF5006ANE CF5006ANF CF5006BNE – 2.0 4.0 t Measurement cct 3, load cct 1, 0.1V DD to 0.9V DD , C L = 50 pF SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 4.0 8.0 SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006BNCS, CF5006BNC SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 3.5 7.0 SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006BNES, CF5006BNE – 3.0 6.0 Output f all time tf1 Measurement cct 3, load cct 1, 0.9V DD to 0.1V DD , C L = 15 pF SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 2.0 4.0 ns SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006BNCS, CF5006BNC SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 1.5 3.0 tf2 Measurement cct 3, load cct 1, 0.9V DD to 0.1V DD , C L = 30 pF CF5006ANE CF5006ANF CF5006BNE – 2.0 4.0 t Measurement cct 3, load cct 1, 0.9V DD to 0.1V DD , C L = 50 pF SM5006ANAS, CF5006ANA SM5006ANBS, CF5006ANB SM5006CNCS, CF5006CNC SM5006CNDS, CF5006CND SM5006DNCS, CF5006DNC – 4.0 8.0 SM5006ANCS, CF5006ANC SM5006ANDS, CF5006AND SM5006BNCS, CF5006BNC SM5006CNES, CF5006CNE SM5006DNES, CF5006DNE – 3.5 7.0 SM5006ANES, CF5006ANE SM5006ANFS, CF5006ANF SM5006BNES, CF5006BNE – 3.0 6.0

NIPPON PRECISION CIRCUITS—13 Output duty cycle *1 Duty Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 5.0 V f = 30MHz, C L = 50 pF SM5006ANAS CF5006ANA 4 5–5 5 f = 40MHz, C L = 50 pF SM5006ANBS CF5006ANB 4 5–5 5 f = 60MHz, C L = 50 pF SM5006ANCS CF5006ANC 4 5–5 5 f = 70MHz, C L = 50 pF SM5006ANDS CF5006AND SM5006BNCS CF5006BNC 4 5–5 5 f = 100MHz, C L = 30 pF CF5006ANE 45 – 55 f = 100MHz, C L = 15 pF SM5006ANES 45 – 55 f = 107MHz, C L = 30 pF CF5006ANF CF5006BNE 4 5–5 5 f = 107MHz, C L = 15 pF SM5006ANFS SM5006BNES 4 5–5 5 f = 50MHz, C L = 50 pF SM5006CNCS CF5006CNC SM5006DNCS CF5006DNC 4 5–5 5 f = 100MHz, C L = 15 pF SM5006CNES CF5006CNE SM5006DNES CF5006DNE 4 5–5 5 f = 60MHz, C L = 15 pF SM5006CNCS CF5006CNC 4 0–6 0 f = 70MHz, C L = 15 pF SM5006CNDS CF5006CND SM5006DNCS CF5006DNC 4 0–6 0 Output disable delay time t PLZ Measurement cct 3, load cct 1, Ta = 25 °C, VDD = 5 V, C L ≤ 15 pF – – 100 ns Output enable delay time t PZL – – 100 ns *1. Deter mined by the lot monitor. Parameter Symbol Condition Rating Unit min typ max

NIPPON PRECISION CIRCUITS—14 5006×K series VSS = 0 V , Ta = −40 to 85 °C unless otherwise noted. 5006AH series VDD = 4.5 to 5.5 V , VSS = 0 V , Ta = −40 to 85 °C unless otherwise noted. Parameter Symbol Condition Rating Unit min typ max Output rise time t r Measurement cct 3, load cct 1, 0.4V to 2.4V , V DD = 4.5 to 5.5 V C L = 15 pF – 2 4 ns C L = 50 pF – – 7 Output f all time t f Measurement cct 3, load cct 1, 2.4V to 0.4V , V DD = 4.5 to 5.5 V C L = 15 pF – 2 4 ns C L = 50 pF – – 7 Output duty cycle *1 *1. Deter mined by the lot monitor. Duty Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 5.0 V, C L = 15 pF f = 30MHz SM5006AKAS CF5006AKA 4 5–5 5 f = 40MHz SM5006AKBS CF5006AKB 4 5–5 5 f = 60MHz SM5006AKCS CF5006AKC 4 0–6 0 f = 70MHz SM5006AKDS CF5006AKD SM5006BKCS CF5006BKC 4 5–5 5 f = 50MHz SM5006DKCS CF5006DKC 4 5–5 5 f = 70MHz SM5006CKDS CF5006CKD SM5006DKCS CF5006DKC 4 0–6 0 Output disable delay time t PLZ Measurement cct 3, load cct 1, Ta = 25 °C, VDD = 5 V, C L ≤ 15 pF – – 100 ns Output enable delay time t PZL – – 100 ns Parameter Symbol Condition Rating Unit min typ max Output rise time tr1 Measurement cct 3, load cct 1, 0.1V DD to 0.9V DD C L = 15 pF – 5.0 7.0 ns tr2 C L = 50 pF – 13 21 Output f all time tf1 Measurement cct 3, load cct 1, 0.9V DD to 0.1V DD C L = 15 pF – 5.0 7.0 ns tf2 C L = 50 pF – 13 21 Output duty cycle *1 *1. Deter mined by the lot monitor. Duty Measurement cct 3, load cct 1, Ta = 25 °C, V DD = 5.0 V, C L = 15 pF f = 30MHz SM5006AHAS CF5006AHA 4 5–5 5 f = 40MHz SM5006AHBS CF5006AHB 4 5–5 5 f = 50MHz SM5006AHCS CF5006AHC 4 5–5 5 f = 60MHz, Ta = –20 to 80 °C CF5006AHC 40 – 60 f = 60MHz, Ta = –15 to 75 °C SM5006AHCS 40 – 60 f = 70MHz, Ta = –20 to 80 °C CF5006AHD 40 – 60 f = 70MHz, Ta = –15 to 75 °C SM5006AHDS 40 – 60 Output disable delay time t PLZ Measurement cct 3, load cct 1, Ta = 25 °C, VDD = 5 V, C L ≤ 15 pF – – 100 ns Output enable delay time t PZL – – 100 ns

NIPPON PRECISION CIRCUITS—15 Current consumption and Output waveform with NPC’s standard crystal FUNCTIONAL DESCRIPTION Standby Function When INH goes LOW, the oscillator output on Q goes high impedance. INH Q Oscillator HIGH (or open) f O output frequency Normal oper ation LOW High impedance Normal oper ation f (MHz) R ( Ω) L (mH) Ca (fF) Cb (pF) 30 18.62 16.24 1.733 5.337 40 20.53 11.34 1.396 3.989 50 22.17 7.40 1.370 4.105 70 25.42 4.18 1.254 5.170 100 16.60 3.56 0.726 5.394 107 35.83 2.98 0.732 2.265 L Ca R Cb

NIPPON PRECISION CIRCUITS—16 MEASUREMENT CIRCUITS Measurement cct 1 3.5V P −P , 10MHz sine wave input signal (5V operation) 2.0V P −P , 10MHz sine wave input signal (3V operation) C1 : 0.001 µF R1 : 50 Ω R2 : 250 Ω (5006 ×N ×/5V oper ation) 275 Ω (5006 ×N ×/3V oper ation) 245 Ω (5006AKA, AKB, AKC, CKD, DKC) 250 Ω (5006AKD, BKC) 975 Ω (5006AH ×) Measurement cct 4 Measurement cct 2 Measurement cct 5 Measurement cct 3 Signal Generator VDD VSS XT Q R1 R2 VOH Q out monitor XT Rfo VDD VSS IPR 5.0V INH RUP = VDD IPR VIH A VDD VSS Q IOL, IZ VOLV A INH XT IZ VDD VSS IRf Rf = XT VDD IRf XT A VDD VSS XT QX'tal XT INH A Rfo IDD IST

NIPPON PRECISION CIRCUITS—17 Load cct 1 Load cct 2 Switching Time Measurement Waveform Output duty level (CMOS) Output duty level (TTL) Output duty cycle (CMOS) Output duty cycle (TTL) Q output CL (Including probe capacitance) Q output (Including probe capacitance) 400Ω CL 0.9VDD 0.1VDD 0.9VDD 0.1VDD tr tf Q output DUTY measurement voltage (0.5VDD) TW 2.4VDD 0.4VDD 2.4VDD 0.4VDD tr tf Q output DUTY measurement voltage (1.4V DD) TW DUTY measurement voltage (0.5VDD)Q output TW T DUTY= TW/ T 100 (%) DUTY measurement voltage (1.4VDD)Q output TW T DUTY= TW/ T 100 (%)

NIPPON PRECISION CIRCUITS—18 NC9713EE 2000.10 NIPPON PRECISION CIRCUITS INC. reserves the right to make changes to the products described in this data sheet in order to improve the design or performance and to supply the best possible products. Nippon Precision Circuits Inc. assumes no responsibility fo r the use of any circuits shown in this data sheet, conveys no license under any patent or other rights, and makes no claim that the circuits are free from patent infr ingement. Applications for any devices shown in this data sheet are for illustr ation only and Nippon Precision Circuits Inc. makes no claim or warranty that such applications will be suitable for the use speciﬁed without further testing o r modiﬁcation. The products described in this data sheet are not intended to use for the apparatus which inﬂ uence human lives due to the failure or malfunction of the products. Customers are requested to comply with applicable laws and regulations in effect now and hereinaft er, including compliance with export controls on the distribution or dissemination of the products. Customers shall not e xport, directly or indirectly, any products without ﬁrst obtaining required licenses and approv als from appropriate gover nment agencies. NIPPON PRECISION CIRCUITS INC. 4-3, Fukuzumi 2-chome Koto-ku, Tokyo 135-8430, J apan Telephone: +81-3-3642-6661 Facsimile: +81-3-3642-6698 http://www.npc.co .jp/ Email: sales @ npc.co.jp NIPPON PRECISION CIRCUITS INC. Output Enable/Disable Delay Q output INH VIH VIL tPLZ tPZL INH input waveform tr = tf 10ns

Product Information

SM5006AHBS specifications and overview.

Summary

Crystal Oscillator Module ICs

Description

Crystal Oscillator Module ICs

Source title SM5006AHBS Datasheet(PDF) - Nippon Precision Circuits Inc

Related Parts

More parts from the same family.

Browse manufacturer