SM31E BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Self-contained photoelectric sensors Sensor Features Gain (Sensitivity) Adjustment Screw Alignment Indicator Device (AID)* Light/Dark Operate Select Switch Clockwise: Light Operate (outputs conduct when sensing light is received). Counterclockwise: Dark Operate (outputs conduct when sensing light is not received). *U.S. Patent no. 4356393 WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Integral 2 m (6.5 ft) unterminated cable models are listed.
- To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number. For example, SM31EW/30.
- To order the 4-pin M12/Euro-style QD models, add the suffix “QD” to the model number. For example, SM31EQD.
- To order the 150 mm (6 in) cable with QD, add the suffix “QDP” to the model number. For example, SM31EQDP.
- To order a 0.3 ms response time model, add the suffix “MHS” to the model number. For example, SM31EMHS. Sensing Mode Range LED Model OPPOSED Opposed Emitter 3 m (10 ft) Infrared, 880 nm SM31E Opposed Receiver SM31R Opposed Emitter - Long Range 30 m (100 ft) SM31EL Opposed Receiver - Long Range SM31RL OPPOSED Opposed Emitter - Clear Plastic Detection 0 to 300 mm (0 to 12 in) Actual range varies, depending on the light transmission properties of the plastic material being sensed. Visible red, 650 nm SM31EPD Opposed Receiver - Clear Plastic Detection SM31RPD RETRO Non-Polarized Retroreflective 5 m (15 ft) SM312LV P POLAR RETRO Polarized Retroreflective 55 mm to 2 m (2 in to 7 ft) SM312LVAG Extended-Range Polarized Retroreflective 10 mm to 3 m (0.4 in to 10 ft) SM312LP DIFFUSE Diffuse 380 mm (15 in) Infrared, 880 nm SM312D 300 mm (12 in) SM312DBZ Divergent Diffuse 130 mm (5 in) SM312W CONVERGENT Convergent 16 mm (0.65 in) Focus SM312C 43 mm (1.7 in) Focus SM312C2 MINI-BEAM® DC Voltage Series Original Document 69943 Rev. F
26 January 2018
Sensing Mode Range LED Model CONVERGENT 16 mm (0.65 in) Focus Visible red, 650 nm SM312CV 43 mm (1.7 in) Focus SM312CV2 CONVERGENT 16 mm (0.65 in) Focus Visible blue, 475 nm SM312CVB 49 mm (1.9 in) Focus SM312CV2B CONVERGENT 16 mm (0.65 in) Focus Visible green, 525 nm SM312CVG 49 mm (1.9 in) Focus SM312CV2G GLASS FIBER Glass Fiber Optic Range varies, depending on sensing mode and fiber optics used. Infrared, 880 nm SM312F Visible red, 650 nm SM312FV Visible blue, 475 nm SM312FVB Visible green, 525 nm SM312FVG PLASTIC FIBER Plastic Fiber Optic Visible red, 650 nm SM312FP Visible blue, 475 nm SM312FPB Visible green, 525 nm SM312FPG Special High-Power Option Plastic Fiber Optic Visible red, 650 nm SM312FPH Wiring Diagrams Emitters with Attached Cable All Other Models with Attached Cable bn bu 10-30V dc bn wh bu bk Load Load 10-30V dc Emitters with Quick Disconnect (4-pin Euro-Style) All Other Models with Quick Disconnect (4-pin Euro-Style) bn wh bu bk 10-30V dc bn wh bu bk Load Load 10-30V dc The output type for all models is Bipolar NPN/PNP; load 150 mA max., each output. Sensor Mounting and Alignment MINI-BEAM sensors perform most reliably if they are properly aligned and securely mounted. For maximum mechanical stability, mount MINI-BEAM sensors through 18 mm diameter holes by their threaded barrel (where available), or use a mounting bracket. A complete selection of mounting brackets is available. Visit http:// www.bannerengineering.com or contact Banner Engineering for information on mounting options. Begin with line-of-sight positioning of the MINI-BEAM sensor to its emitter (opposed-mode sensing) or to its target (all other sensing modes). When using a retroreflective sensor, the target is the retroreflector (“retro target”). For diffuse or convergent sensing modes, the target is the object to be detected. MINI-BEAM® DC Voltage Series 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 69943 Rev. F
Apply power to the sensor (and to the emitter, if using the opposed mode). Advance the 15-turn Gain control to maximum (clockwise end of rotation) using a small flat-blade screwdriver. The Gain control is clutched at both ends to avoid damage and will “free-wheel” when either endpoint is reached. If the MINI-BEAM sensor is receiving its light signal, the red LED Alignment indicator will be ON and flashing at a rate proportional to the signal strength (faster = more signal). Move the sensor (or retro target, if applicable) up-down-right-left (including angular rotation) to find the center of the movement zone within which the LED indicator remains ON. Reducing the Gain setting reduces the size of the movement zone for more precise alignment. Repeat the alignment motions after each Gain reduction. When optimum alignment is achieved, mount sensor(s) (and the retro target, if applicable) solidly in that position. Increase the Gain to maximum. Test the sensor by placing the object to be detected in the sensing position, then removing it. The Alignment indicator LED should come ON when the sensing beam is established (Light condition) or be ON when the beam is broken (Dark condition). If the Alignment indicator LED stays ON for both sensing conditions, consider the following tips for each sensing mode. Opposed Mode Alignment ObjectEmitter Receiver “Flooding” occurs when a portion of the sensing beam passes around the object to be sensed. “Burn-through” occurs when a portion of the emitter’s light energy passes through a thin or translucent object, and is sensed by the receiver. To correct either problem, do one or more of the following to reduce the light energy:
- Reduce the Gain adjustment on the receiver
- Add an aperture to one or both lenses (MINI-BEAM apertures, available from Banner, fit neatly inside the lens assembly)
- Intentionally misalign the emitter and receiver Note:
- Light condition: sensor output is ON when there is no object in the beam
- Dark condition: sensor output is ON when there is an object in the beam Diffuse Mode Alignment Object If the Alignment LED does not go OFF when the object is removed from the beam, the sensor is probably detecting light reflected from some background object. To remedy this problem:
- Reduce the reflectivity of the background by painting the surface(s) flat-black, scuffing any shiny surface, or drilling a large hole, directly opposite the diffuse sensor
- Move the sensor closer to the object to be detected and reduce the Gain adjustment. Rule of thumb for diffuse sensing: The distance to the nearest background object should be at least three times the sensing distance Note:
- Light condition: sensor output is ON when there is no object in the beam
- Dark condition: sensor output is ON when there is an object in the beam MINI-BEAM® DC Voltage Series P/N 69943 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 3
Retroreflective Mode Alignment Retro Target A highly reflective object may reflect enough light back to a retroreflective sensor to allow that object to slip through the beam, without being detected. This problem is called “proxing,” and the following methods may be used to correct it:
- Position the sensor and retro target so the beam will not strike a shiny surface perpendicular to the sensor lens
- Reduce the Gain adjustment
- Add a polarizing filter (for model SM312LV) Note:
- Light condition: sensor output is ON when there is no object in the beam
- Dark condition: sensor output is ON when there is an object in the beam Convergent Mode Alignment Object Low Reflectivity Background The sensing energy of a convergent mode sensor is concentrated at the specified focus point. Convergent mode sensors are less sensitive to background reflections, compared with diffuse mode sensors. However, if background reflections are a problem:
- Skew the sensor position at a 10° to 25° angle to eliminate direct reflections from shiny background surfaces
- Reduce the reflectivity of the background by painting the surface(s) flat-black, scuffing any shiny surface, or drilling a large hole, directly opposite the sensor
- Reduce the Gain adjustment Note:
- Light condition: sensor output is ON when there is no object in the beam
- Dark condition: sensor output is ON when there is an object in the beam Plastic Fiber Installation Trimmed fiber control ends Plastic fiber emitter port Plastic fiber receiver port Gripper Unlock Lock Adapters for 0.25- and 0.5-mm fibers Sensor Face 1. With supplied fiber cutter, make a clean cut at the control ends of fibers. 2. Unlock the fiber gripper as shown in the drawing. 3. Apply appropriate fiber adaptors to the fiber, if needed. 4. Gently insert the prepared fiber ends into the ports as far as they will go. 5. Slide the fiber gripper back to lock, as shown in the drawing. MINI-BEAM® DC Voltage Series 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 69943 Rev. F
- Install the O-ring (supplied with the fiber) on each fiber end, as shown in the drawing. 2. While pressing the fiber ends firmly into the ports on the sensor front, slide the U-shaped retaining clip (supplied with the sensor) into the slot in the sensor's barrel, until it snaps into place. Specifications Supply Voltage and Current 10 to 30 V dc (10% maximum ripple) at less than 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Bipolar: One current sourcing (PNP) and one current sinking (NPN) open collector transistor Output Rating 150 mA maximum each output at 25 °C, derated to 100 mA at 70 °C (derate ≈ 1 mA per °C) OFF State Leakage Current: less than 1 microamp Output Saturation Voltage (PNP Output): less than 1 volt at 10 mA, less than 2 volts at 150 mA Output Saturation Voltage (NPN Output): less than 200 millivolts at 10 mA, less than 1 volt at 150 mA Environmental Rating Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12, and 13; IEC IP67. Connections PVC-jacketed 4-conductor 2 m (6.5 ft) or 9 m (30 ft) cables, or 4-pin Euro- style QD fitting; QD cables available separately Operating Conditionsperating Conditions Temperature: –20 °C to +70 °C (–4 °F to +158 °F) Humidity: 90% at +50 °C maximum relative humidity (non-condensing) Application Note The NPN (current sinking) output of dc MINI-BEAM sensors is directly compatible as an input to Banner logic modules, including all non-amplified MAXI-AMP and MICRO-AMP modules. MINI-BEAMs are TTL compatible. Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short-circuit of outputs Output Response Time Sensors will respond to either a “light” or “dark” signal of 1 millisecond or longer duration, 500 Hz maximum. Modification for 0.3 millisecond response is available (MHS-suffix models; these models also feature reduced sensitivity range and reduced repeatability.) Note: Outputs are non-conducting during 100 millisecond delay on power-up. Repeatability Opposed: 0.14 milliseconds Non-Polarized and Polarized Retro, Diffuse, Convergent, Glass Fiber Optic, and Plastic Fiber Optic: 0.3 milliseconds Response time and repeatability specifications are independent of signal strength. Adjustments Light/Dark Operate Select switch 15-turn slotted brass screw Gain (sensitivity) adjustment potentiometer (clutched at both ends of travel) Located on the rear panel, protected by a gasketed, clear acrylic cover. Indicators Patented alignment Indicator Device system (AID™, US patent #4356393) lights a rear-panel-mounted LED indicator when the sensor sees light. Its pulse rate is proportional to the light signal strength (the stronger the signal, the faster the pulse rate). Construction Reinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses, stainless steel screws Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Certifications MINI-BEAM® DC Voltage Series P/N 69943 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 5
Performance Curves for SM31Ex Emitter and SM31Rx Receiver Models Beam Pattern for SM31E/R Excess Gain Curve for SM31E/R Beam Pattern for SM31EL/RL Excess Gain Curve for SM31EL/RL 0100 mm200 mm300 mm 100 mm200 mm300 mm 04.0 in8.0 in12.0 in 4.0 in8.0 in12.0 in Distance Opposed Mode SM31E & SM31RSMA31E & SM2A31R 100 1000Excess Gain Opposed Mode SM31E & SM31RSMA31E & SM2A31R 30 m100ft24 m80 ft18 m60 ft12 m40 ft6 m20 ft0 0250 mm500 mm750 mm 250 mm500 mm750 mm 010.0 in20.0 in30.0 in 10.0 in20.0 in30.0 in Distance Opposed Mode SM31EL & SM31RLSMA31EL & SM2A31RL 100 1.0 m3.3 ft10 m33 ft 100 m330 ft0.1 m0.33 ft 1000 Distance Opposed Mode Excess Gain SM31EL & SM31RLSMA31EL & SM2A31RL Effective Beam: 3.5 mm Effective Beam: 13 mm Performance Curves for the SM312Lx Retroreflective Models Beam Pattern for SM312LVxx Excess Gain Curve for SM312LVxx Beam Pattern for SM312LP Excess Gain Curve for SM312LP 5 m15 ft4 m12 ft3 m9 ft2 m6 ft1 m3 ft0 025 mm50 mm75 mm 25 mm50 mm75 mm 01.0 in2.0 in3.0 in 1.0 in2.0 in3.0 in Distance Retroreflective Mode SM312LVSM2A312LV With BRT-3 Reflector 100 1000 Excess Gain Retroreflective ModeWith BRT-3 Reflector SM312LVSM2A312LV 020 mm40 mm60 mm 20 mm40 mm60 mm 00.8 in1.6 in2.4 in 0.8 in1.6 in2.4 in Distance Retroreflective ModeSM312LPSM2A312LP With BRT-3 Reflector 100 0.1 m0.3 ft1 m3 ft 10 m30 ft.01 m0.03 ft 1000 Distance Excess Gain Retroreflective Mode SM312LPSM2A312LP With BRT-3 Reflector 025 mm50 mm75 mm 25 mm50 mm75 mm 01.0 in2.0 in3.0 in 1.0 in2.0 in3.0 in Distance Retroreflective ModeSM312LVAGSM2A312LVAG With BRT-3 Reflector 100 1000 Distance Excess Gain Retroreflective Mode With BRT-3 Reflector SM312LVAGSM2A312LVAG Performance Curves for the SM312Dx and SM312W Diffuse Models Beam Pattern for SM312Dx Excess Gain Curve for SM312Dx Beam Pattern for SM312W Excess Gain Curve for SM312W 05 mm10 mm15 mm 5 mm10 mm15 mm 00.2 in0.4 in0.6 in 0.2 in0.4 in0.6 in Distance Diffuse ModeSM312D, SM2A312D 100 10 mm.4 in100 mm4 in 1000 mm40 in1 mm.04 in 1000 Distance Diffuse Mode Excess Gain SM312D, SM2A312D 07.5 mm15.0 mm22.5 mm 7.5 mm15.0 mm22.5 mm 00.3 in0.6 in0.9 in 0.3 in0.6 in0.9 in Distance Diffuse ModeSM312W, SM2A312W 100 10 mm.4 in100 mm4 in 1000 mm40 in1 mm.04 in 1000 Distance Excess Gain Diffuse Mode SM312WSM2A312W MINI-BEAM® DC Voltage Series 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 69943 Rev. F
SM312Dx Beam Pattern for SM312W Excess Gain Curve for SM312W 05 mm10 mm15 mm 5 mm10 mm15 mm 00.2 in0.4 in0.6 in 0.2 in0.4 in0.6 in Distance Diffuse ModeSM312DBZ, SM2A312DBZ 100 10 mm.40 in100 mm4.0 in1000 mm40 in1 mm.04 in 1000 Distance Excess Gain Diffuse Mode SM312DBZSM2A312DBZ Performance Curves for the SM312Cx Convergent Models Beam Pattern for SM312C Excess Gain Curve for SM312C Beam Pattern for SM312CV Excess Gain Curve for SM312CV 125 mm (5") 100 mm (4") 75 mm (3") 50 mm (2") 25 mm (1") 1.2 mm 2.5 mm 3.8 mm 1.2 mm 2.5 mm 3.8 mm 0.05" 0.10" 0.15" 0.05" 0.10" 0.15" Distance SM312C, SM2A312C Convergent Mode 100 10 mm (0.4") 100 mm (4") 1000 mm (40") 1 mm (0.04") 1000 Distance SM312C, SM2A312C Convergent Mode Excess Gain 37.5 mm (1.5") 30 mm (1.2") 22.5 mm (0.9") 15 mm (0.6") 7.5 mm (0.3") 1.0 mm 2.0 mm 3.0 mm 1.0 mm 2.0 mm 3.0 mm 0.04" 0.08" 0.12" 0.04" 0.08" 0.12" Distance SM312CV , SM2A312CV Convergent Mode 100 10 mm (0.4") 100 mm (4") 1000 mm (40") 1 mm (0.04") 1000 Distance SM312CV SM2A312CV Convergent Mode Excess Gain 125 mm (5") 100 mm (4") 75 mm (3") 50 mm (2") 25 mm (1") 1.2 mm 2.5 mm 3.8 mm 1.2 mm 2.5 mm 3.8 mm 0.05" 0.10" 0.15" 0.05" 0.10" 0.15" Distance SM312C2, SM2A312C2 Convergent Mode 100 10 mm (0.4") 100 mm (4") 1000 mm (40") 1 mm (0.04") 1000 Distance SM312C2 SM2A312C2 Convergent Mode Excess Gain 125 mm (5") 100 mm (4") 75 mm (3") 50 mm (2") 25 mm (1") 1.0 mm 2.0 mm 3.0 mm 1.0 mm 2.0 mm 3.0 mm 0.04" 0.08" 0.12" 0.04" 0.08" 0.12" Distance SM312CV2, SM2A312CV2 Convergent Mode 100 10 mm (0.4") 100 mm (4") 1000 mm (40") 1 mm (0.04") 1000 Distance SM312CV2 SM2A312CV2 Convergent Mode Excess Gain Performance is based on a 90% reflectance white test card. Beam Pattern for SM312CVB Excess Gain Curve for SM312CVB Beam Pattern for SM312CVG Excess Gain Curve for SM312CVG 37.5 mm (1.5") 30 mm (1.2") 22.5 mm (0.9") 15 mm (0.6") 7.5 mm (0.3") 0.40 mm 0.80 mm 1.20 mm 0.40 mm 0.80 mm 1.20 mm 0.015" 0.030" 0.045" 0.015" 0.030" 0.045" Distance SM312CVB Convergent Mode 100 10 mm (0.4") 100 mm (4") 1000 mm (40") 1 mm (0.04") 1000 Distance SM312CVB Convergent Mode Excess Gain 00.40 mm0.80 mm1.20 mm 0.40 mm0.80 mm1.20 mm 00.015 in0.030 in0.045 in 0.015 in0.030 in0.045 in Distance SM312CVG, SM2A312CVGConvergent Mode 100 10 mm.4 in100 mm4 in 1000 mm40 in1 mm.04 in 1000 Distance Excess Gain SM312CVG,SM2A312CVGConvergent Mode MINI-BEAM® DC Voltage Series P/N 69943 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 7
SM312CVB Beam Pattern for SM312CVG Excess Gain Curve for SM312CVG 125 mm (5") 100 mm (4") 75 mm (3") 50 mm (2") 25 mm (1") 1.0 mm 2.0 mm 3.0 mm 1.0 mm 2.0 mm 3.0 mm 0.04" 0.08" 0.12" 0.04" 0.08" 0.12" Distance SM312CV2B Convergent Mode 100 10 mm .4 in 100 mm 4 in 1000 mm 40 in 1 mm .04 in 1000 Distance SM312CV2B Convergent Mode Excess Gain 125 mm5 in100 mm4 in75 mm3 in50 mm2 in25 mm1 in0 01.0 mm2.0 mm3.0 mm 1.0 mm2.0 mm3.0 mm 00.04 in0.08 in0.12 in 0.04 in0.08 in0.12 in Distance SM312CV2GConvergent Mode 100 10 mm.4 in100 mm4 in 1000 mm40 in1 mm.04 in 1000 Distance Excess Gain SM312CV2G Convergent Mode Performance Curves for the SM312F Glass Fiber Optic Models Diffuse Mode Opposed Mode Beam Pattern for SM312F Excess Gain Curve for SM312F Beam Pattern for SM312F Excess Gain Curve for SM312F 00.65 mm1.3 mm1.9 mm 0.65 mm1.3 mm1.9 mm 00.025 in0.050 in0.075 in 0.025 in0.050 in0.075 in Distance Diffuse Mode BT23SBT13S SM312F, SM2A312F 100 10 mm.4 in100 mm4 in 1000 mm40 in1 mm.04 in 1000 Distance Excess Gain Diffuse ModeGlass Fibers BT23S Fiber BT13S Fiber SM312F, SM2A312F 500 mm20 in400 mm16 in300 mm12 in200 mm8 in100 mm4 in0 025 mm50 mm75 mm 25 mm50 mm75 mm 01 in2 in3 in 1 in2 in3 in Distance Opposed Mode IT13S IT23S SM312F, SM2A312F 100 1000 Distance Excess Gain Opposed ModeGlass Fibers IT23S Fibersw/L9 lenses IT23S FibersIT13S Fibers SM312F, SM2A312F Diffuse Mode Opposed Mode Beam Pattern for SM312FV Excess Gain Curve for SM312FV Beam Pattern for SM312FV Excess Gain Curve for SM312FV 00.65 mm1.30 mm1.95 mm 0.65 mm1.30 mm1.95 mm 00.025 in0.050 in0.075 in 0.025 in0.050 in0.075 in Distance Diffuse Mode BT23SBT13S SM312FV, SM2A312FV 100 1 mm.04 in10 mm.40 in100 mm4 in.1 mm.004 in 1000 Distance Diffuse Mode SM312FVSM2A312FV BT23S Fiber BT13S Fiber Excess Gain 250 mm10 in200 mm8 in150 mm6 in100 mm4 in50 mm2 in0 025 mm50 mm75 mm 25 mm50 mm75 mm 01 in2 in3 in 1 in2 in3 in Distance Opposed Mode IT13S IT23S SM312FV, SM2A312FV 100 10 mm.40 in100 mm4.0 in1000 mm40 in1 mm.04 in 1000 Distance Excess Gain Opposed Mode IT13S FiberIT23S Fiber SM312FVSM2A312FV Beam Pattern for SM312FVB Excess Gain Curve for SM312FVB Beam Pattern for SM312FVG Excess Gain Curve for SM312FVG 40 mm (1.5") 32 mm (1.2") 24 mm (0.9") 16 mm (0.6") 8 mm (0.3") 1.0 mm 1.0 mm 0.04" 0.04" 2.0 mm 0.08" 3.0 mm 2.0 mm 0.08" 0.12" 3.0 mm 0.12" Distance BT23SBT13S SM312FVB Diffuse Mode 100 1 mm (0.04") 10 mm (0.40") 100 mm (4") 0.1 mm (0.004") 1000 Distance SM312FVB Diffuse Mode BT23S Fiber BT13S Fiber Excess Gain 01.0 mm 1.0 mm 00.04 in 0.04 in2.0 mm 0.08 in3.0 mm 2.0 mm 0.08 in 0.12 in 3.0 mm 0.12 in Distance BT23SBT13S SM312FVGDiffuse Mode 100 1 mm.04 in10 mm.40 in100 mm4 in.1 mm.004 in 1000 Distance Excess Gain SM312FVG Diffuse Mode BT23S Fiber BT13S Fiber MINI-BEAM® DC Voltage Series 8 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 69943 Rev. F
Performance Curves for the SM312FP Plastic Fiber Models Diffuse Mode Opposed Mode Beam Pattern for SM312FP Excess Gain Curve for SM312FP Beam Pattern for SM312FP Excess Gain Curve for SM312FP 01.2 mm2.5 mm3.8 mm 1.2 mm2.5 mm3.8 mm 00.05 in0.01 in0.015 in 0.05 in0.10 in0.15 in Distance SM312FP/SM2A312FPDiffuse Mode PBT46UPBT26U 100 1 mm.04 in10 mm.4 in100 mm4 in.1 mm.004 in 1000 Distance Excess Gain SM312FPSM2A312FPDiffuse ModePlastic Fibers PBT46U Fiber PBT26U Fiber 125 mm5 in100 mm4 in75 mm3 in50 mm2 in25 mm1 in0 015 mm30 mm45 mm 15 mm30 mm45 mm 00.6 in1.2 in1.8 in 0.6 in1.2 in1.8 in Distance SM312FP/SM2A312FPOpposed Mode PIT46UPIT26U 100 10 mm.40 in100 mm4.0 in1000 mm40 in1 mm.04 in 1000 Distance Excess Gain SM312FP SM2A312FP Opposed ModePlastic Fibers PIT46U FiberPIT26U Fiber Beam Pattern for SM312FPB Excess Gain Curve for SM312FPB Beam Pattern for SM312FPG Excess Gain Curve for SM312FPG 20 mm (0.75") 16 mm (0.60") 12 mm (0.45") 8 mm (0.30") 4 mm (0.15") 1.0 mm 2.0 mm 3.0 mm 1.0 mm 2.0 mm 3.0 mm 0.04" 0.08" 0.12" 0.04" 0.08" 0.12" Distance SM312FPB Diffuse Mode PBT46U 100 1 mm (0.04") 10 mm (0.4") 100 mm (4") 0.1 mm (0.004") 1000 Distance SM312FPB Diffuse Mode Plastic Fiber PBT46U Fiber Excess Gain 01.0 mm2.0 mm3.0 mm 1.0 mm2.0 mm3.0 mm 00.04 in0.08 in0.12 in 0.04 in0.08 in0.12 in Distance SM312FPGDiffuse Mode PBT46U 100 1 mm.04 in10 mm.4 in100 mm4 in.1 mm.004 in 1000 Distance Excess Gain SM312FPG Diffuse ModePlastic Fiber PBT46U Fiber Dimensions Cabled Models (Suffix E, EL, EPD, R, RL, RPD, LV, LVAG, LP, LPC, D, C, C2, CV, CV2, CVG, CV2G, CVB, CV2B, CVW ) 3 mm dia Clearance (2) M18 × 1 × 15 mm Thread(Mounting nut supplied) 19.1 mm (0.75”) Mounting peg(6.3 mm dia × 2.5 mm) 2 m (6.5’) Cable Divergent Diffuse Models (Suffix DBZ and W) 3 mm dia Clearance (2) Bezel 18.0 mm (0.71”) MINI-BEAM® DC Voltage Series P/N 69943 Rev. F www.bannerengineering.com - Tel: +1-763-544-3164 9
(Suffix F, FV, FVB, FVG, FVW) M18 x 1 x 19 mm Thread (Mounting Nut Supplied) 57.5 mm (2.27") 31.2 mm (1.23") Fiber Optic Fitting Plastic Fiber Models (Suffix FP, FPB, FPG, FPH, FPW) 3 mm dia clearance (2) FiberOpticFitting 22.3 mm(0.88”) 19.1 mm(0.75”) Mounting Peg(6.3 mm dia × 2.5 mm) 2 m (6.5’) Cable QD Models 20.0 mm(0.79”) 12 mm Thread Quick-disconnect Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. MINI-BEAM® DC Voltage Series © Banner Engineering Corp. All rights reserved