SM2002 FAIRVIEW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

REV 1.1 Page 1 of 4 Copyright © 2016 SMB jack to SMB jack bulkhead adapter part number SM2002 from Fairview Microwave is in-stock and ships same day. This Fairview SMB to SMB adapter has a jack to jack gender configuration. SM2002 SMB jack to SMB jack adapter operates to 4 GHz. Our RF SMB to SMB bulkhead adapter allows designers to create external connections on their product enclosures, and can be used in a variety of other rack mount and panel mount applications. The Fairview Microwave RF adapter provides good VSWR of 1.3:1 maximum. RF adapters can be used to enable connections between two connector types that would otherwise not mate. Certain RF adapter configurations can also be used to protect connectors on expensive equipment where the number of connect and disconnect cycles is high. An RF, microwave, or millimeter wave adapter is connected to the equipment and the commonly changed connection is made with the adapter which can be easily replaced when it wears out after high usage; such adapters are referred to as connnector savers. Fairview Microwave also offers bulkhead, panel mount, hermetically sealed, reverse polarity, and isolated ground adapter varieties to serve all of your RF, microwave and millimeter wave needs. Electrical Specifications Descript ion Min Typ Max Units Frequency Range D C 4 GHz VSWR 1.3:1 Operating Voltage (AC) 335 Vr ms Electrical Specification Notes: Values at 25°C, sea level. Mechanical Specifications Size Length 0.724 in [18.39 mm] Width 0.195 in [4.95 mm] Height 0.25 in [6.35 mm] Weight 0.00309 lbs [1.4 g] Description Co nnector 1 Co nnector 2 Type SM B Jack SM B Jack Polarity Stan dard Stan dard Interface Specification MIL -STD-348A MIL -STD-348A SMB Jack to SMB Jack Bulkhead Adapter Fairview Microwave 1130 Junction Dr. #100 Allen, TX 75013 Tel: 1-800-715-4396 / (972) 649-6678 Fax: (972) 649-6689 www.fairviewmicrowave.com sales@fairviewmicrowave.com Configuration:

  • SMB Jack Connector 1
  • SMB Jack Connector 2
  • 50 Ohms
  • Straight Body Geometry
  • Bulkhead Mount Method Features:
  • VSWR of 1.3:1 max up to 4 GHz
  • SMB interface meets MIL-STD-348A
  • 30 µin minimum contact plating
  • Gold Plated Brass Contact Applications:
  • General Purpose Test
  • Rack Mounted Equipment SM2002 DATA SHEET

Description Co nnector 1 Co nnector 2 Type SM B Jack SM B Jack Contact Material B rass B rass Contact Plating Gold Gold Contact Plating Spec. 30 µ in minimum 30 µ in minimum Insulation Material PTFE PTFE Outer Contact Material B rass B rass Outer Contact Plating Gold Gold Outer Contact Plating Spec. 3 µ in minimum 3 µ in minimum Environmental Specifications Temperature Operating Range -65 to +165 deg C Compliance Certifications (see product page for current document) Plotted and Other Data Notes: Typical Performance Data 1130 Junction Dr. #100 Allen, TX 75013 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 2 of 4 SM2002 DATA SHEET

SMB Jack to SMB Jack Bulkhead Adapter from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Allen, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: SMB Jack to SMB Jack Bulkhead Adapter SM2002 URL: https://www.fairviewmicrowave.com/smb-jack-smb-jack-bulkhead-adapter-sm2002-p.aspx 1130 Junction Dr. #100 Allen, TX 75013 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 3 of 4 SM2002 DATA SHEET

1130 Junction Dr. #100 Allen, TX 75013 | Tel: 1-800-715-4396 / (972) 649-6678 / Fax: (972) 649-6689 REV 1.1 Page 4 of 4 SM2002 TITLE NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. CAD FILE 011216 SCALE N/A SIZE A 5568 FAIRVIEW MICROWAVE INC. ALLEN, TX 75013 WWW.FAIRVIEWMICROWAVE.COM DWG NO CAGE CODE 3FKR5 SHEET 0.724" [18.4] [0.80] 0.091" [2.3] MAX PANEL 0.169" [4.30] FLAT 0.25" [6.35] SQ. 10-32 UNEF NUT WASHER MOUNTING HOLE 0.250" [6.35] HEX 0.177" [4.5] MIN. Ø 0.195" [4.95] MIN. SM2002 DATA SHEET SMB Jack to SMB Jack Bulkhead Adapter