SM101 DAESAN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • The plastic package carries Underwrites Laboratory Flammability Classification 94V-0
  • For surface mounted applications
  • Glass passivated junction
  • High temperature soldering guaranteed: 250℃/10 seconds, at terminals Maximum Ratings And Electrical Characteristics
  • Case : JEDEC MELF(DO-41) molded plastic body
  • Terminals : Lead solderable per MIL-STD-750, method 2026
  • Polarity : Color band denotes cathode end
  • Mounting Position : Any
  • Weight : 0.0041 ounce, 0.116 gram (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Notes: (1) Reverse recovery time test condition : IF=0.5A, IR=1.0A, IRR=0.25A (2) Measured at 1MHz and applied reverse voltage of 4.0V DC. CURRENT 1.0 Ampere VOLTAGE 50 to 1000 Volts Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms half sine wave superimposed on rated load (JEDEC method) VDC Maximum average forward rectified current 0.375"(9.5mm) lead length at TA=55℃ Maximum instantaneous forward voltage at 1.0A VRRM Volts Symbols SM101 Units 1.3 VF VRMS 1.0 Amps IFSM TJ TSTG 100 -55 to +175 Volts Amp Maximum DC reverse current at rated DC blocking voltage Typical thermal resistance Maximun reverse recovery time (Note 1) Operating and storage temperature range SM102 SM103 SM104 SM105 SM106 SM107 5.0 100 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 Volts μA ℃/W ns I(AV) IR trr RθJA TA=25℃ TA=100℃ 150 250 500 30.0 (Note 2) Dimensions in inches and (millimeters) MELF (DO-41) 0.205(5.20) 0.190(4.80) 0.024(0.60) 0.018(0.46) SOLDERABLE ENDS 0.105(2.70) 0.095(2.40)

RATINGS AND CHARACTERISTIC CURVES SM101 THRU SM107 0.1 1.0 .0 1 FIG.1-TYPICAL FORWARDCHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLTAGE,(V) Pulse Width 300us 1% Duty Cycle 0.2 0.4 0.6 0.8 1.0 1.2 (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 D.U.T. 3.0 o AMBIENT TEMPERATURE ( C) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE Tj=25 C FIG.4-MAXIMUM NON-REPETITIVE FORWARDSURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) NUMBER OF CYCLES AT 60Hz 100 o Tj=25 C 8.3ms Single Half Sine Wave JEDEC method Single Phase Half Wave 60Hz Resistive Or Inductive Load 0 20 40 60 80 100 120 140 160 180 200