SM0 ETC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
SM Solenoid - C&S Controls Ltd. 18/8/15 Page 1 of 5 1. D2600 Relay C & S Controls Ltd.
22 Upland Road,
Bexleyheath, Kent, DA7 4NR. Tel: Fax: Email: Web: +44 (0)208 304 4882 +44 (0)208 301 1938 sales@candscontrolsltd.com www.candscontrolsltd.com TM SM Solenoids A range of seven (7) stripped frame solenoids to suit a wide range of push and pull applications. Wide choice of AC* or DC operating coils. Two (2) miniature solenoids for light high speed applications. Five (5) robust general purpose solenoids. Thrust rod lengths to order. Suitable for intermittent duty where loads can be significantly increased. RoSH compliant. * SM00 & SM5 Solenoids are DC operation only. 1. SM0/SM00 Miniature Solenoids For light high speed pull or thrust applications, particularly suitable for intermittent duty where loads can be significantly increased. Simple single hole fixing (see SM Outline Drawing). For standard and custom (special order) options available, contact sales e.g. impregnation, thrust rod length, etc. 1.1. SM00 Solenoid Short stroke miniature solenoid for use in confined spaces (at up to 2000 cycles/minute). Coil voltages from 3V to 50V DC continuous, or higher for intermittent duty with increased pull/thrust (see performance data). 1.2. Technical Data Standard voltages (continuous rating): 12, 24, 50VDC Mass 38g. 1.3. SM00 Performance Data Rating* Watts 100% 2.75 50% 5.5 25% 11 10% 27.5 1.3.2. SM00 Characteristics 100% 50% 25% 10% 0 10 8 Stroke (mm) Force (N) D.C. characteristics for horizontal operation at working temperature.
SM Solenoid - C&S Controls Ltd. 18/8/15 Page 2 of 5 1.4. SM0 Solenoid Longer stroke than SM00 solenoid. Coil voltages from 3V to 125VDC . May be used on AC but should be restricted to very light loads with plunger seated to avoid slight noise. 1.5. Technical Data Standard Voltages (continuous rating): - 48, 110 & 240VAC 50Hz. 6, 12, 14 & 50VDC. Mass 53g. 1.6. SM0 Performance Data 1.6.1. Nominal Power Consumption (cold) Rating* A.C. D.C. VA closed VA at 12.7mm stroke Watts 100% 6 13 3 50% 11 17 6 25% 18 25 12 10% 41 50 30 1.6.2. SM0 Characteristics 1614121086420 5Force (N) Stroke (mm) 10% 25% 50% 100% a.c. types 1614121086420 10Force (N) Stroke (mm) 10%25% 50% 100% d.c. types operation at working temperature. * Note – duty cycle must ensure that heating is not excessive during “ON” time. 2. SM1 – SM5 General Purpose Solenoids A range of five (5) robust solenoids with sleeved plungers for trouble-free operation and tapped hole on two (2) face of the stripped frame for universal mounting (see SM Outline Drawing). The solenoids are capable of operations up to 200 cycles per minute dependant on conditions. Coils are readily interchangeable and are available for AC and DC operation (except SM5 that are DC only). For standard and custom (special order) options available contact sales e.g. impregnation, thrust rod length, lead termination, AC coil operating frequency (Hz), etc. 2.1. Technical Data Standard voltages (continuous rating): - 12, 24, 50, 110V DC. 48, 110, 240 AC 50Hz. Coils available to order for other voltages and frequencies, or for intermittent use where operating force can be increased significantly (see characteristics). Mass (g) Type Total Plunger SM1 135 21.3 SM2 193 28.4 SM3 397 35.4 SM4 610 49.5 SM5 815 120.1
SM Solenoid - C&S Controls Ltd. 18/8/15 Page 3 of 5
2.2 SM Solenoids – DC Characteristics
D.C. Continuous Rating Type Max. Stroke mm Pull at Max. Stroke N Approx. Watts (Cold) Max. Volts SM1 9.5 0.20 4.4 100 SM2 16.0 0.28 6.0 200 SM3 14.3 0.28 8.5 250 SM4 22.0 0.85 10.2 250 SM5 25.0 1.98 12.8 250 D.C. 50% Rating Type Max. Stroke mm Pull at Max. Stroke N Approx. Watts (Cold) Max. Volts SM1 9.5 0.99 8.8 100 SM2 16.0 1.27 12.0 250 SM3 14.3 1.42 17.0 250 SM4 22.0 2.26 20.4 250 SM5 25.0 5.38 25.6 250 D.C. 25% Rating Type Max. Stroke mm Pull at Max. Stroke N Approx. Watts (Cold) Max. Volts SM1 12 1.00 18 250 SM2 22 1.00 24 250 SM3 16 1.00 34 250 SM4 25 3.00 41 250 SM5 25 7.00 52 250 D.C. 10% Rating Type Max. Stroke mm Pull at Max. Stroke N Approx. Watts (Cold) Max. Volts SM1 12 3.00 44 250 SM2 24 1.25 60 250 SM3 16 2.00 85 440 SM4 25 4.00 102 440 SM5 25 15.00 128 440 0 4 8 12 16 20 24 Stroke mm Force (N) SM5 SM4 SM3 SM2 SM1 SM5 SM4 SM3 SM2 SM1 SM5 SM4 SM3 SM2 SM1 SM5 SM4 SM3 SM2 SM1 Force (N) 40 Force (N) 40 Force (N) 40 0 4 8 12 16 20 24 Stroke mm 0 4 8 12 16 20 24 Stroke mm 0 4 8 12 16 20 24 Stroke mm
SM Solenoid - C&S Controls Ltd. 18/8/15 Page 4 of 5
2.3 SM Solenoids – AC Characteristics
A.C. Continuous Rating at 50Hz Type Max. Stroke mm Pull at Max. Stroke N Approx.VA Inrush At Max. Stroke (cold) Approx. VA Closed Max. Volts SM1 9.5 0.28 17 6.0 250 SM2 16.0 0.56 33 10.0 250 SM3 14.3 2.55 50 12.0 250 SM4 25.0 3.11 95 18.5 440 A.C. 50% Rating at 50Hz Type Max. Stroke mm Pull at Max. Stroke N Approx.VA Inrush At Max. Stroke (cold) Approx. VA Closed Max. Volts SM1 9.5 0.56 30 12.0 250 SM2 16.0 1.13 44 17.5 250 SM3 14.3 3.97 84 24.0 440 SM4 25.0 5.38 168 35.0 440 A.C. 25% Rating at 50Hz Type Max. Stroke mm Pull at Max. Stroke N Approx.VA Inrush At Max. Stroke (cold) Approx. VA Closed Max. Volts SM1 12.0 1.00 58 21 250 SM2 19.0 2.50 75 30 250 SM3 19.0 3.50 148 41 440 SM4 25.0 10.00 280 60 440 A.C. 10% Rating at 50Hz Type Max. Stroke mm Pull at Max. Stroke N Approx.VA Inrush At Max. Stroke (cold) Approx. VA Closed Max. Volts SM1 13.0 2.00 140 52 250 SM2 19.0 4.00 160 60 250 SM3 19.0 8.00 300 115 440 SM4 25.0 17.50 600 200 440 SM4 SM3 SM2 SM1 SM4 SM3 SM2 SM1 0 4 8 12 16 20 24 Stroke mm 0 4 8 12 16 20 24 Stroke mm 0 4 8 12 16 20 24 Stroke mm 0 4 8 12 16 20 24 Stroke mm Force (N) 40 SM4 Force (N) 40 Force (N) 40 SM3 Force (N) 40 SM4 SM2 SM3 SM2 SM1 SM1
SM Solenoid - C&S Controls Ltd. 18/8/15 Page 5 of 5 3. SM Solenoid Outline Drawings All dimensions in mm unless stated. # Custom thrust rod length available to special order (SM0/SM00). 4. How to Order Please specify: 1. Type (e.g. SM3). 2. Pull or thrust. For thrust types specify projection required (dimension ‘P’ above) with solenoid energised. 3. Voltage, DC or AC (& frequency). 4. Rating (e.g. 50%) 5. Special requirements (e.g. lead lengths, coil treatments, etc).
4.1 Technical Advice
For advice on selecting the most suitable solenoids our Sales and Engineering will be pleased to assist. Type A B C D E F G H J K L M N O P Total Mass Plunger Mass SEE SCRAP VIEW 1.8 SEE SCRAP VIEW 8.4 20.9# 38g - G F A E B L C H P J (Thrust type only) K Hole N M 300mm Flying Leads O 4BA Fixing Holes M6 Fixing Nut E 6BA Hole x 6.5 Deep Leads 150mm Scrap View Showing SM0 & SM00 Solenoid Variations Dimensions in mm with solenoid energised