SM03 MCC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
l SOT-23 Package For surface mount application l Protects 3.0/3.3 up through 36V Components l Protects 2 Unidirectional or 1 Bidirectional line l Provides electrically isolated protection l Tape & Reel EIA Standard 481. Mechanical Data l Molded: SOT-23 Surface Mount l Body marked with device number. l Mounting Position: Any l Weight: 0.14 grams (approx.) MAXIMUM RATINGS § Operating Temperature: -55oC to +150oC § Storage Temperature: -55oC to +150oC § SM03 thru SM36 have a Peak Pulse Power:500 Watts (8/20 usec, Figure 1) § Pulse Repetition Rate: <.01% Packaging SM03 THRU SM36 Transient Voltage Suppressor
500 Watt
A .110 .120 2.80 3.04 B .083 .098 2.10 2.64 C .047 .055 1.20 1.40 D .035 .041 .89 1.03 E .070 .081 1.78 2.05 F .018 .024 .45 .60 G .0005 .0039 .013 .100 H .035 .044 .89 1.12 J .003 .007 .085 .180 K .015 .020 .37 .51 A BC D EF G H J .079 2.000 inches mm .031 .800 .035 .900 .037 .950 .037 .950 www.mccsemi.com The SM03 thru SM36 product provides board level protection from static electricity and other induced-voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such as DRAM's, SRAM's, COMS, HCOMS, HSIC, and low volt. interfaces up to 36 volts. Because of the physical size, weight and protection capabilities, this product is ideal for use in but not limited to miniaturized electronic equipment such as hand held instruments, computers, computer peripherals and cell phones. /G01/G02/G03/G04/G05/G06/G07/G05/G08/G08/G09/G04/G03/G02/G0A/G0B/G06/G07omponents
21201 Itasca Street Chatsworth
/G07/G18/G06/G19/G0F/G1A/G0F/G0F /G1B/G15/G05/G1C/G09/G1D/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G1A /G24/G0A/G25/G1D/G06/G06/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G19 MCC
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. WAVE FORMS MOUNTING PAD SOT23 CIRCUIT DIAGRAM 0 10 20 30 100 t -- Time in microsec Ipp -- Peak Pulse Current -- % Ipp Peak Value -- Ipp Half-Value -- Ipp
8 X 20 Waveform
t t d FIGURE 2 Pulse Wave Form FIGURE 1 Peak Pulse Power Vs Pulse Time ELECTRICAL CHARACTERISTICS PER LINE @ 25ºC Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR @1 mA VOLTS CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS LEAKAGE CURRENT ID @ VWM µA CAPACITANCE @0V, 1 MHz C Pin 1-3 or 2-3 pF CAPACITANCE @0V, 1 MHz C Pin 1-2 pF PART NUMBER DEVICE MARKING MIN MAX MAX MAX MAX MAX SM03 M03 3.3 4 7 9 200 800 400 SM05 M05 5.0 6.0 9.8 11 100 600 300 SM12 M12 12.0 13.3 19 24 1 185 93 SM15 M15 15.0 16.7 24 30 1 140 70 SM24 M24 24.0 26.7 43 55 1 88 44 SM36 M36 36.0 40.0 60 75 1 88 39 NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. www.mccsemi.com MCC