SLVU2.8 APMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 280W peak pulse power (8/20μs)
  • Ultra low leakage: nA level
  • Low operating voltage: 2.8V
  • Very low capacitance: 0.6pF
  • Ultra low clamping voltage
  • JEDEC SO-8 package
  • Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-5 (Lightning) 18A (8/20μs)
  • RoHS Compliant SLVU2.8 2.8V TVS Array For ESD and Latch-Up Protection Part Number Packaging Reel Size LC03-3.3 500/Tape & Reel 7 inch LC-3.3 = Device Marking Code Dot denotes Pin1 Circuit and Pin Schematic Dimensions and Pin Configuration Mechanical Characteristics
  • Package: SOT-23
  • Lead Finish: Matte Tin
  • Moisture Sensitivity: Level 3 per J-STD-020
  • Terminal Connections: See Diagram Below
  • Marking Information: See Below

Applications

  • Base Station
  • Analog Inputs
  • Switch Systems
  • 10/100/1000 Ethernet
  • WAN/LAN Equipment
  • Desktops, Servers, and Notebooks
  • Low Voltage Interfaces Marking Information

Ordering Information

Part Number Packaging Reel Size SLVU2.8 3000/Tape & Reel 7 inch U2.8= Device Marking Code All d ata sheet.com

Revision 1 2 of 4 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 280 W Peak Pulse Current (8/20µs) IPP 18 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±30 ±30 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 2.8 V Pin 3 or Pin 2 to Pin 1 Breakdown Voltage VPT 3.0 V IPT = 2µA , Pin 3 to 1 VBR 3.5 V IT= 1mA , Pin 3 to 1 VSB 3.8 V ISB= 50mA , Pin 3 to 1 Reverse Leakage Current IR 1 µA VT=VRWM Clamping Voltage VC 7 V IPP = 1A (8 x 20µs pulse) Clamping Voltage VC 15.5 V IPP = 18A (8 x 20µs pulse) Junction Capacitance CJ 0.6 1 pF VR = 0V, f = 1MHz SLVU2.8 All d ata sheet.com

Revision 1 3 of 4 www.appliedpowermicro.com SLVU2.8 Typical Performance Characteristics (TA=25°C unless otherwise Specified) Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve

8 X 20μs Pulse Waveform ESD Clamping Voltage

8 kV Contact per IEC61000−4−2 Note：Data is taken with a 10x attenuator 100 0 20 40 60 80 % of Peak Pulse Current Time_t(μs) All d ata sheet.com

Revision 1 4 of 4 www.appliedpowermicro.com Suggested Land Pattern Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 SLVU2.8 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. SYM DIMENSIONS MILLIMETERS INCHES MIN NOM MAX MIN NOM MAX A1 0.00 - - 0.10 0.000 - - 0.004 A2 0.90 - - 1.05 0.035 - - 0.041 E1 2.25 - - 2.55 0.089 0.100 e 0.95TYP 0.037TYP e1 1.80 - - 2.00 0.071 - - 0.079 L 0.55REF 0.022REF L1 0.30 - - 0.50 0.012 - - 0.020 SYM DIMENSIONS INCHES MILLIMETERS C (.087) (2.20) E .037 0.95 E1 .075 1.90 G .031 0.80 X .039 1.00 Y .055 1.40 Z .141 3.60 All d ata sheet.com