SLVU2.8-4_05 PROTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SLVU2.8-4 05142.R10 4/05 www.protekdevices.com ULTRA LOW CAPACITANCE TVS ARRAY Only One Name Means ProTek’Tion™

APPLICATIONS

✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Audio/Video Inputs ✔ Personal Digital Assistant (PDA) IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Ground) & Level 3(Line-Line)

FEATURES

✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Provides Protection For Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW LEAKAGE CURRENT < 1.0µA ✔ ULTRA LOW CAPACITANCE: 3pF Typical ✔ RoHS Complaint in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 70 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code, Logo, Date Code & Pin One Defined By DOT on Package 05142 PIN CONFIGURATION SO-8

www.protekdevices.com 05142.R10 4/05 SLVU2.8-4 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Current (tp = 8/20µs) Lead Soldering Temperature Operating Temperature SYMBOL VALUE -55°C to 150°C -55°C to 150°C Amps Watts UNITS 260°C (10s) 600 TJ IFRM IPP PPP PARAMETER Storage Temperature TSTG ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified TYPICAL CAPACITANCE (See Note 1) @0V, 1MHz C pF 1.0 MAXIMUM CLAMPING VOLTAGE (See Note 1) (See Fig. 2) @IP = 30A VC VOLTS MAXIMUM LEAKAGE CURRENT (See Note 1) @VWM ID µA Note 1: Device measured between pin 1 to 2, pin 3 to 4, pin 5 to 6 and pin 7 to 8. MAXIMUM CLAMPING VOLTAGE (See Note 1) (See Fig. 2) @IP = 5A VC VOLTS 8.5 5.5 MAXIMUM CLAMPING VOLTAGE (See Note 1) (See Fig. 2) @IP = 2A VC VOLTS MINIMUM SNAPBACK VOLTAGE (See Note 1) @ISB = 50mA VSB VOLTS 2.8 3.0 2.8 SL4 SLVU2.8-4 PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE (See Note 1) VWM VOLTS MINIMUM BREAKDOWN VOLTAGE (See Note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Note 1) (See Fig. 2) @IP = 24A VC VOLTS

www.protekdevices.com 05142.R10 4/05 SLVU2.8-4 PACKAGE OUTLINE & DIMENSIONS Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., SLVU2.8-4-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., SLVU2.8-4-T13. 4. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., SLVU2.8-4-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. A B C D F G J K P R 4.80 3.80 1.35 0.35 0.40

1.27 BSC

0.18 0.10 5.80 0.25 5.00 4.00 1.75 0.49 1.250 0.25 0.25 6.20 0.50 0.189 0.150 0.054 0.014 0.016

0.05 BSC

0.007 0.004 0.229 0.010 0.196 0.157 0.068 0.019 0.049 0.009 0.008 0.244 0.019 DIM MIN MAX MIN MAX MILLIMETERS INCHES PACKAGE DIMENSIONS NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. PACKAGE OUTLINE SO-8 MOUNTING PAD