SLVU2.8-4 APMICRO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

 600W peak pulse power (8/20μs)  Protects two line pairs (four lines)  Ultra low leakage: nA level  Low operating voltage: 2.8V  Very low capacitance: 2pF  Ultra low clamping voltage  JEDEC SO-8 package  Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-5 (Lightning) 30A (8/20μs)  RoHS Compliant SLVU2.8-4 2.8V TVS Array For ESD and Latch-Up Protection Part Number Packaging Reel Size LC03-3.3 500/Tape & Reel 7 inch LC-3.3 = Device Marking Code Dot denotes Pin1 Circuit and Pin Schematic Dimensions and Pin Configuration Mechanical Characteristics  Package: SO-8  Lead Finish: Matte Tin  Moisture Sensitivity: Level 3 per J-STD-020  Terminal Connections: See Diagram Below  Marking Information: See Below

Applications

 Base Station  Analog Inputs  Switch Systems  10/100/1000 Ethernet  WAN/LAN Equipment  Desktops, Servers, and Notebooks  Low Voltage Interfaces Marking Information

Ordering Information

Part Number Packaging Reel Size SLVU2.8-4 2500/Tape & Reel 13 inch Pin 1, 3 Pin 2, 4 Pin 6, 8 Pin 5, 7 2.8-4= Device Marking Code YYWW = Date Code Dot denotes Pin1 2.8-4 All d ata sheet.com

Revision 08/2018 2 of 5 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 600 W Peak Pulse Current (8/20µs) IPP 30 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±30 ±30 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 2.8 V VBR 3.0 V IT = 2µA Breakdown Voltage VSB 3.0 V ISB= 50mA Reverse Leakage Current IR 0.001 1 µA VRWM = 2.8V Clamping Voltage VC 8.5 V IPP = 5A (8 x 20µs pulse) Clamping Voltage VC 18 V IPP = 25A (8 x 20µs pulse) Clamping Voltage VC 20 V IPP = 30A (8 x 20µs pulse) Junction Capacitance CJ 2 3 pF VR = 0V, f = 1MHz SLVU2.8-4 All d ata sheet.com

Revision 08/2018 3 of 5 www.appliedpowermicro.com SLVU2.8-4 Typical Performance Characteristics (TA=25°C unless otherwise Specified) Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current Power Derating Curve

8 X 20μs Pulse Waveform ESD Clamping Voltage

8 kV Contact per IEC61000−4−2 Note：Data is taken with a 10x attenuator 100 0 20 40 60 80 % of Peak Pulse Current Time_t(μs) 0 5 10 15 20 25 30 Clamping Voltage _Vc(V) Peak Pulse Current_Ipp (A) All d ata sheet.com

Revision 08/2018 4 of 5 www.appliedpowermicro.com Typical Application The SLVU2.8-4 is designed such that the data lines are routed through the device. The first line pair enters at pins 1 and 2 and exit at pins 8 and 7 respectively. The second line pair enters at pins 3 and 4 and exits at pins 6 and 5. The traces must be connected at the bottom of the device as shown. SLVU2.8-4 Low capacitance protection of two differential line pairs SLVU2.8-4 on Ethernet Application Line 1 Line 3 Line 2 Line 4 Line 1 Line 3 Line 2 Line 4 ETHERNET PHY All d ata sheet.com

Revision 08/2018 5 of 5 www.appliedpowermicro.com Suggested Land Pattern Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 SLVU2.8-4 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. SY M DIMENSIONS MILLIMETERS INCHES MIN NOM MAX MIN NOM MAX A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 1.65 0.049 0.065 b 0.31 0.51 0.012 0.020 c 0.17 0.25 0.007 0.010 E 6.00 BSC 0.236 BSC e 1.27 BSC 0.050 BSC h 0.25 0.50 0.010 0.020 L1 (1.04) (0.041) N 8 8 θ1 0° 8° 0° 8° aaa 0.10 0.004 bbb 0.25 0.010 ccc 0.20 0.008 SYM DIMENSIONS MILLIMETERS INCHES C (5.20) 0.205 G 3.00 0.118 P 1.27 0.050 X 0.60 0.024 Y 2.20 0.087 Z 7.40 0.291 All d ata sheet.com