SLP223M016E3P3

SLP CDE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Temperature Range –40 ºC to +105 ºC ≤ 100 Vdc –25 ºC to +105 ºC ≥ 160 Vdc Rated Voltage Range 10 Vdc to 450 Vdc Capacitance Range 47 µF to 56,000 µF Capacitance Tolerance ±20% Leakage Current ≤ 3 √CV µA at 5 minutes Ripple Current Multipliers Ambient Temperature Low Temperature Characteristics Impedance ratio: Z–20⁰C ∕ Z+25⁰C ≤ 10 (10 Vdc) ≤ 8 (16–50 Vdc) ≤ 4 (63–100 Vdc) ≤ 3 (150–450 Vdc) Endurance Life 3,000 h @ full load @105 ºC Δ Capacitance ±20% ESR ≤200% of limit DCL 100 % of limit Shelf Life 1,000 h @ 105 ºC Δ Capacitance ±20% ESR ≤150% of limit DCL 100 % of limit Vibration 10 Hz to 55 Hz , 0.06” and 10g max 2 h for each plane RoHS Compliant Type SLP is the best value package snap-in series for 105 ºC, 3000 h operation. This series is the most cost-eff ective choice for DC fi ltering and power supply applications where high temperature, long life and high ripple capability are needed. Highlights - 3000 h ripple load life at rated voltage - 105 ºC rated - Small case size with high capacitance - Best for switching power supplies - 22 mm to 35 mm diameter, 10 mm lead spacing - Best value snap-in type - High ripple current Specifi cations Frequency 20 ºC - 45 ºC 65 ºC 85 ºC 105 ºC 2.00 1.89 1.52 1.00 Voltage 60 Hz 120 Hz 1 kHz 10 kHz & Up 10 - 100 Vdc 0.90 1.00 1.15 1.25 160 - 450 Vdc 0.80 1.00 1.25 1.47 To apply multipliers, see ratings tables for ripple current values Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800

10.0 D+1 max. 6.3±1 L±2 2 x Ø2.0±0.1 Vent PC Board Mounting Holes 1.5 +0.2/-0.1 0.8 +0.2/-0.1 6.3 3.5 0.8 +0.2/-0.1 4.0 mm pin length option (add “A” to end of part #) SLP 562 M 025 A3 P 3 A Case Insulating Type Cap Tolerance Voltage Code Polarity Sleeve Pin Style SLP 821 = 820 µF M = ±20% 025 = 25 Vdc P = Polarized 3 = PVC Blank = 2 pins 332 = 3300 µF 250 = 250 Vdc snap-in 6.3 mm L 103 = 10,000 µF A = 2 pins snap-in 4.0 mm L Diameter Length mm (in) mm (in) 25 30 35 40 45 50 22 (0.87) A1 A3 A5 A7 A4 A9 25 (1.00) C1 C3 C5 C7 C4 C9 30 (1.18) E1 E3 E5 E7 E4 E9 35 (1.38) H1 H3 H5 H7 H4 H9 Outline Drawing Ratings Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type Part Numbering System 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal Cap Catalog (Ω) (Arms) Size (DxL) Cap Catalog (Ω) (Arms) Size (DxL) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm)

10 Vdc (13 Vdc Surge) 16 Vdc (20 Vdc Surge)

16 Vdc (20 Vdc Surge) 39000 SLP393M016H7P3 0.017 0.013 5.10 6.38 35 x 40 10000 SLP103M016A3P3 0.066 0.050 2.60 3.25 22 x 30 Additional Voltages and Sizes available at www.cde.com/catalogs/SLP .pdf CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830

Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal Cap Catalog (Ω) (Arms) Size (DxL) Cap Catalog (Ω) (Arms) Size (DxL) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm)

25 Vdc (32 Vdc Surge) 35 Vdc (44 Vdc Surge)

6800 SLP682M025A3P3 0.088 0.066 2.40 3.00 22 x 30 50 Vdc (63 Vdc Surge) 35 Vdc (44 Vdc Surge) 8200 SLP822M050E7P3 0.057 0.043 3.71 4.64 30 x 40 5600 SLP562M035C3P3 0.095 0.071 2.40 3.00 25 x 30 63 Vdc (79 Vdc Surge) Additional Voltages and Sizes available at www.cde.com/catalogs/SLP .pdf CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830

Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal Cap Catalog (Ω) (Arms) Size (DxL) Cap Catalog (Ω) (Arms) Size (DxL) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm)

63 Vdc (79 Vdc Surge) 100 Vdc (125 Vdc Surge)

80 Vdc (100 Vdc Surge) 2700 SLP272M100E7P3 0.098 0.074 2.86 3.58 30 x 40 2200 SLP222M080C5P3 0.151 0.113 2.10 2.63 25 x 35 160 Vdc (200Vdc Surge) 100 Vdc (125 Vdc Surge) 1200 SLP122M160H3P3 0.166 0.125 2.49 3.66 35 x 30 1200 SLP122M100C3P3 0.221 0.166 1.68 2.10 25 x 30 180 Vdc (225Vdc Surge) Additional Voltages and Sizes available at www.cde.com/catalogs/SLP .pdf CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830

Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal Cap Catalog (Ω) (Arms) Size (DxL) Cap Catalog (Ω) (Arms) Size (DxL) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm)

180 Vdc (225Vdc Surge) 200 Vdc (250 Vdc Surge)

820 SLP821M180C7P3 0.243 0.182 2.04 3.00 25 x 40 220 Vdc (270 Vdc Surge) 200 Vdc (250 Vdc Surge) 560 SLP561M220C5P3 0.355 0.266 1.64 2.41 25 x 35 560 SLP561M200A4P3 0.355 0.266 1.67 2.45 22 x 45 250 Vdc (300 Vdc Surge) Additional Voltages and Sizes available at www.cde.com/catalogs/SLP .pdf CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830

Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal Cap Catalog (Ω) (Arms) Size (DxL) Cap Catalog (Ω) (Arms) Size (DxL) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) 250 Vdc (300 Vdc Surge) 820 SLP821M315H4P3 0.405 0.304 2.20 3.23 35 x 45 330 SLP331M250A7P3 0.603 0.452 1.30 1.91 22 x 40 350 Vdc (400 Vdc Surge) 315 Vdc (365 Vdc Surge) 470 SLP471M350E4P3 0.706 0.530 1.65 2.43 30 x 45 180 SLP181M315C3P3 1.843 1.382 0.93 1.37 25 x 30 385 Vdc (435 Vdc Surge) Additional Voltages and Sizes available at www.cde.com/catalogs/SLP .pdf CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830

Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal 3000 h @ 105 ºC Max 25 °C ESR Max 105 °C Ripple Nominal Cap Catalog (Ω) (Arms) Size (DxL) Cap Catalog (Ω) (Arms) Size (DxL) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm) (μF) Part Number 120 Hz 20kHz 120 Hz 20kHz (mm)

400 Vdc (450 Vdc Surge) 420 Vdc (470 Vdc Surge)

180 SLP181M400A4P3 1.843 1.382 0.98 1.44 22 x 45 450 Vdc (500 Vdc Surge) 420 Vdc (470 Vdc Surge) 150 SLP151M450C3P3 2.121 1.591 0.82 1.21 25 x 30 Additional Voltages and Sizes available at www.cde.com/catalogs/SLP .pdf CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830

Type SLP 105 °C Snap-In Aluminum Electrolytic Best Value 105 °C Snap-In Type 0.2 0.4 0.6 0.8 1.2 10 100 1000 10000 100000 1000000 Ratio to 25 °C, 120 Hz Value Frequency (Hz) Type SLP Capacitance vs Frequency at Temperatures 330 µF 350 V 85 ºC 25 ºC45 ºC 0 ºC –40 ºC 65 ºC –20 ºC 105 ºC 0.2 0.4 0.6 0.8 1.2 10 100 1000 10000 100000 1000000 Ratio to 25 ºC, 120 Hz Value Frequency (Hz) Type SLP Capacitance vs Frequency at Temperatures 1200 µF 200 V 85 ºC 25 ºC45 ºC 0 ºC –40 ºC 65 ºC –20 ºC 105 ºC 0.1 100 1000 10 100 1000 10000 100000 1000000 Ratio to 25 °C, 120 Hz Value Frequency (Hz) Type SLP ESR vs Frequency at Temperatures 330 µF 350 V –20 ºC 0 ºC 25 ºC 65 ºC 85 ºC 45 ºC –40 ºC 105 ºC 0.01 0.1 100 10 100 1000 10000 100000 1000000 Ratio to 25 ºC, 120 Hz Value Frequency (Hz) Type SLP Impedance vs Frequency at Temperatures 330 µF 350 V –40 ºC 0 ºC 25 ºC 85 ºC 65 ºC 45 ºC –20 ºC 105 ºC 0.01 0.1 100 10 100 1000 10000 100000 1000000 Ratio to 25 ºC, 120 Hz Value Frequency (Hz) Type SLP Impedance vs Frequency at Temperatures 1200 µF 200 V –40 ºC 0 ºC 25 ºC 65 ºC85 ºC 45 ºC –20 ºC 105 ºC Typical Performance Curves CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 0.1 100 10 100 1000 10000 100000 1000000 Ratio to 25 ºC, 120 Hz Value Frequency (Hz) Type SLP ESR vs Frequency at Temperatures 1200 µF 200 V –20 ºC 0 ºC 25 ºC 65 ºC85 ºC 45 ºC –40 ºC 105 C

Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required.