SLO75P SUNTSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Ceramic SMD Low Current 6 Pad LVPECL Oscillator 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618 Frequency Range Frequency Stability (Includes Initial Tolerance at 25°C, Frequency Stability over Operating Temperature, Output Load Change, Supply Voltage Change, and First Year Aging at 25°C.) Storage Temperature Supply Voltage (VDD) - 2.5V Option Operating Temperature See part numbering guide for options See part numbering guide for options MHz ppm V SLO 75 P 3 A 48 1 - 156.250M Cage Code : 4GUT4 To customize your parameters, contact a Suntsu representative. * For Frequency stability option D, contact a Suntsu representative.

  • ±20ppm (Frequency Stability) Available
  • Ceramic Package
  • LVPECL
  • Low Current Consumption
  • Fundamental or 3rd Overtone Crystal Design
  • Fiber Channel
  • Gigabit Ethernet
  • PCI Express Features Applications Part Numbering Guide MHz COMPLIANT FREQUENCY 7.0mm x 5.0mm TRI-STATE (ENABLE/DISABLE) LVPECL OPERATING TEMPERATURE RANGESUPPLY VOLTAGE FREQUENCY STABILITY 2: 2.5V±5% 3 : 3.3V±5% A : ±50ppm B : ±30ppm C : ±25ppm *D : ±20ppm 07 : 0°C - +70°C 16 : -10°C - +60°C 17 : -10°C - +70°C 27 : -20°C - +70°C 38 : -30°C - +85°C 48 : -40°C - +85°C BLANK : No Connection 1 : Pin 1 Current (IDD) Output Load (LVPECL) Output Logic Levels High (VOH at 3.3V) Rise (TR) and Fall (TF) Time Tri-State Input Voltage - Enable Output Logic Levels Low (VOL at 3.3V) Symmetry (Duty Cycle) 50 Ω into VDD-2.0VDC Measured at 20% to 80% of Waveform No Connection mA Ω V ns V V Tri-State Input Voltage - Disable V Start-Up Time ms Phase Jitter (12kHz ~ 20MHz) 2.5 0.15 120fs 320 +20 +85 +125 2.625 2.420 1.745 0.3 0.3*VDD 150 100 -20 -55 2.375 -40 2.215 0.7*VDD 1.470 SUNTSU LOW CURRENT OSC UnitsElectrical Parameters RemarksTypical MaximumMinimum Output Logic Levels High (VOH at 2.5V) V 1.7601.415 Output Logic Levels Low (VOL at 2.5V) V 1.1950.670 Supply Voltage (VDD) - 3.3V Option V 3.3 3.4653.135

Ceramic SMD Low Current 6 Pad LVPECL Oscillator 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618 All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale. Outline Drawing & Land Pattern Test Circuit (LVPECL) Typical Phase Noise Performance (Measured By Agilent E5052A) Waveform (LVPECL) Frequency - 156.250MHz Frequency - 156.250MHz Tri-State or NC

Ceramic SMD Low Current 6 Pad LVPECL Oscillator 7.0mm x 5.0mm Call: +1-949-783-7300 | Fax: +1-949-783-7301 Specifications are subject to change without notice. www.suntsu.com Suntsu Electronics, Inc. 142 TECHNOLOGY DR., SUITE 150 IRVINE, CA 92618 Tp (Time At 260°C. 20-40 Sec) TI (Time Above 217°C. 60-150Sec) Ts (Preheat Time. 60-180Sec) T 25°C to Peak (480Sec Max) Rup (Ramp Up, 3°C/Sec Max) Rdn (Ramp Down, 6°C/Sec Max) Temperature (°C) 260 217 200 150 Time (sec) Reflow Profile Part Marking Tape And Reel Dimensions 1,000pcs/Reel All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale. Mechanical Shock Vibration MIL-STD-202, Method 213, Condition B MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 1010, Condition B MIL-STD-883, Method 1014, Condition A Moisture Resistance MIL-STD-883, Method 1004MIL-STD-883, Method 1014, Condition C Resistance to Solvents MIL-STD-202, Method 215MIL-STD-883, Method 2003 Temperature Cycling Fine Leak Test Gross Leak Test Solderability Resistance to Soldering Heat MIL-STD-202, Method 210, Condition KJ-STD-020, MSL 1Moisture Sensitivity Environmental Specifications Mechanical Specifications