SLN1TTED20L0G

SL2TTE KOA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

KOA SPEER ELECTRONICS, INC. SS-199 R18 AHA 5/01/08 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 1 OF 6 Current Sensing Chip Resistors Type SL/TSL Resistor 1. Scope This specification applies to current sensing chip resistors (SL/TSL) produced by KOA Corporation. Products with lead-free terminations meet EU-RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC 2. Type Designation The type designation shall be in the following form: Size ToleranceNominal Resistance

1 Watt

2 Watt

3 Watt

D: ± 0.5% F: ± 1% G: ±2% J: ± 5% ±5%: 2 significant figures + 1 multiplier “R” indicates decimal on value <10Ω ±1%: 3 significant figures + 1 multiplier “R” indicates decimal on value <100Ω All values less than 0.1Ω (100mΩ) are expressed in mΩ with “L” as decimal Example: 20mΩ, 1% = 20L0

1 F20L0

SL1, TSL- TE: 7" Embossed Plastic SL2, SLN2, SL3, SLN2- TED: 10" Embossed Plastic (TSL - 3,000 pcs/reel) (SL - 1,000 pcs/reel) TE Termination Material T: Sn (Other termination styles may be available, please contact factory for options) TSL Type New Type 3. Standard Applications CERTIFIED CERTIFIED Absolute Maximum Working Voltage Resistance Tolerance E-24* Resistance Range Part Designation Absolute Maximum Overload Voltage Operating Temperature Range Power Rating T.C.R. (ppm/°C) Max. SL1 SL2 TSL1 1W 200V 500V 400V 1000V -55° C to +180° C ±180: R=<13mΩ ±100: R=>15mΩ ±180: R=<10mΩ ±100: R=>11mΩ ±180: R=<13mΩ ±100: R=>15mΩ 5mΩ - 1MΩ (G: ±2%) SL3 3W 5mΩ - 100mΩ ±180: R=<10mΩ (J: ±5%) 3mΩ ~ 22MΩ 3mΩ, 4mΩ (J: ±5%) (F: ±1%) 3mΩ - 22MΩ (G: ±2%) 5mΩ ~ 1MΩ 3mΩ, 4mΩ (F: ±1%) (J: ±5%) √ P•R √ P•R √ P•R √ P•R 10mΩ - 100mΩ (F: ±1%) (J: ±5%)5mΩ - 100mΩ * 3m, 4m, 5m, 6m, 7m, 8m, 9m resistance values also available (D: ±0.5%) SLN2 2W 5mΩ - 200mΩ±110: R<10mΩ ±75: R=>10mΩ (D: ±0.5%) (F: ±1%) (J: ±5%) – – – –

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 2 OF 6 KOA SPEER ELECTRONICS, INC. SS-199 R18 5-2 Voltage Rating Resistors shall have a rated direct-current (DC) continuous working voltage or approximate sine-wave root-mean- square (RMS) alternating-current (AC) continuous working voltage at commercial-line frequency and waveform corresponding to the power rating, as determined from the following formula: Where: E = Rated voltage (V) E = √ P x R P = Rated power (W) R = Nominal resistance (Ω) Resistive Element Metal Plate: SL1 ≤100 mΩ, SL2 ≤360 mΩ, SL3 Thick Film: SL1 > 100 mΩ, SL2 > 360 mΩ Flameproof Molded Epoxy Case with UL94V-0 Flammability Rating End Termination with Tin/Lead Solder Plating 12 3 4-2 Structure 5. Rating 4. Dimensions and Structure 4-1 Dimensions Derating Curve Surface Temperature Rise % Rated Power 100 70 125 Ambient Temperature (∞C) 0-55 0 180 Temperature Rise (°C) 150 100 50 100 % Rated Power TSL1 (1) TSL1 (2) 00 25 75 125 SLN2 (2) SLN2 (1) 5-1 Rating SL3 For temperature in excess of 110° C, the load shall be derated in accordance with the following figure. 100 -55 0 110 125 180 Ambient Temperature (∞C) W t L a b cc Molded Resin Resistive Element Electrode .453±.012 (11.5±0.3) .276±.008 (7.0±0.2) .276±.008 (7.0±0.2) .098±.008 (2.5±0.2) .197±.008 (5.0±0.2) .094±.008 (2.4±0.2) .102±.02 (2.6±0.5) .453±.012 (11.5±0.3) .217±.008 (5.5±0.2) .100±.016 (2.55±0.4) SL1 SL2 SLN2 cbatWL Dimensions inches (mm) .248±.012 (6.3±0.3) .122±.008 (3.1±0.2) .075±.008 (1.9±0.2) .047±.012 (1.2±0.3) .067±.02 (1.7±0.5) .063±.008 (1.6±0.2) .047±.012 (1.2±0.3) .094±.008 (2.4±0.2) Size Code .453±.012 (11.5±0.3) .276±.008 (7.0±0.2) .098±.008 (2.5±0.2) .197±.008 (5.0±0.2) .102±.02 (1.7±0.5) .122±.008 (3.1±0.2) .039±.008 (1.0±0.2) .248±.012 (6.3±0.3) .094±.008 (2.4±0.2) .047±.012 (0.7±0.2) NEW Temperature Rise (°C) 200 100 50 100 % Rated Power SL1 (1) SL2 (2) 00 25 75 SL1 (2) SL2 (1) 150 175 125 TSL1/SLN2 SL1/SL2

KOA SPEER ELECTRONICS, INC. SS-199 R18 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 3 OF 6 JIS C 5202 5.1 Measured at 25° CWithin specified toleranceResistance Temperature coefficient of resistance Short time overload3 Intermittent overload4 ± 5.0% maximum ± 1.0% maximum JIS C 5202 5.2 + 25° C / +125° C 5* times rated power for 5 seconds

10 Watts (SL3 only)

Rated voltage x 3.0* 1 sec. ON/25 seconds OFF 1,000 cycles

18 Watts 1 second ON/125 seconds OFF

1,000 cycles (SL3 only) Item Requirement Test Method (JIS C 5202)No. 2 1 W 2 W 3 W Insulation Resistance5 10,000 MΩ minimum Surface center to terminations D. C 500V Dielectric Withstanding Voltage 6 ± 0.5% maximum No short, burning or arcing A. C 500V 60 sec. ±180: R=<14.7 mΩ ±100: R=>15 mΩ ±180: R=<10.7 mΩ ±100: R=>11 mΩ ±180: R=<10.7 mΩ ±100: R=>11 mΩ * Since temperature rise of this product are affected by the circuit board size, materials, peripheral heat-producing components, etc. check that the solder fillet part temperature after mounting is less than the solder melting point (180° C) in operating condition and that the package surface is 200° C or less. Also, please install radiating patterns and carefully design the pattern width with respect to the load current so that the above temperatures can be maintained. 6-4 High Frequency Characteristics 6. Characteristics

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 4 OF 6 KOA SPEER ELECTRONICS, INC. SS-199 R18 Dimensions in inches (mm)6-3 Environmental Characteristics 7.9 40° C ± 2° C; 90 ~ 95% RH; 1,000 hours ± 2.0% maximum No visual damage Damp Heat Load Life (Rated load) Temperature Cycling Flammability5 ± 2.0% maximum No visual damage Incombustible ± 1.0% maximum No mechanical damage MIL-STD-202, Method 108, 70° C, 1000 hours @ RCWV, 1.5 hr ON, 0.5 hr OFF 30 minutes @ -55° C, 15 minutes @ +25° C, 30 minutes @ +125° C, 15 minutes @ +25° C, 5 cycles 7.12 3.1 in flame/out flame 15 sec./15 sec. 5 cycles Item Requirement Test Method (JIS C 5202)No. 45∞Outer flame 4.99 (127) Inner flame 1.49 (38) .374 (9.5) Moisture Resistance ± 2.0% maximum No evidence of damage MIL-STD-202, Method 103, 40° C, 90-95% RH, 1000 hours 6-2 Mechanical Characteristics MIL-R55342 π 4.7.7, 260° C for 10 seconds ± 1.0% maximumResistance to Soldering Heat Solderability Vibration3 Resistance to Solvents 95% of the terminal should be covered with new solder No visual and mechanical damage ± 0.5% maximum Immerse in solder at 230° C ± 5° C for 3 ± 0.5 seconds

6.3 Condition A Each direction/2 hours

6.9 Item Requirement Test Method (JIS C 5202)No.

KOA SPEER ELECTRONICS, INC. SS-199 R18 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 5 OF 6 A1 A2 B1 B2 C D F J K1 K2 Q T1 T2 7. Taping 7-1Dimensions of Carrier Tape J Q F .012 (0.3 øMax.).079 (2.0) .157 (4.0) C D .069 (1.75) Dimensions in inches (mm) 0.0 0.0 0.5 0.0 0.0 0.0 0.5 0.0 7-2 Taped Configuration Dimensions in inches (mm)End tape (Empty) (Empty) Leader tape (Top tape)

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. PAGE 6 OF 6 KOA SPEER ELECTRONICS, INC. SS-199 R18 7-3 Reel Dimensions Qty/ øA øB øC øD E W1 W2 Reel 3.0 0.0 Dimensions in inches (mm) ø A øc øB ø d E 3.0 0.0 3.0 0.0 8-1 Body and Marking8. Recommended Land Pattern TSL1, SL1 & SL2 E D F Land Solder mask Dimensions in inches (mm) D E F Body color Black Marking color White Marking items Resistance value and tolerance