SLG59H1302C | DigiCamel IC Datasheet

Online Datasheet

Read SLG59H1302C online.

SLG59H1302C RENESAS | Alldatasheet

Document overview

Manufacturer or author: pwong
PDF pages: 16

Technical content

Features

130 V-tolerant TVS (IEC61000-4-5)
BUS-to-OUT nFET: 12 mΩ/6 A, 28 V tolerant
BUS-to-SYS nFET: 24 mΩ/6 A B2B RB
Always ON, BUS LDO: ±10% tol, 0.1 A capable
BUS UVLO & OVLO Protection
OVP Response Time: 200 ns
Push-pull PG (Power Good) Output
Thermal Shutdown Protection
Active-HIGH IC Shutdown Input
Active-LOW ON1 Input (BUS-to-OUT)
Active-HIGH ON2 Input (BUS-to-SYS)
28-ball CSP , 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch
Pb-Free / Halogen-Free / RoHS Compliant Packaging Pin Configuration

Applications

Wearable Device
Tablet PCs and Smartphones ON1 BUSOK SD PG ON2 BUS OUT OUT BUS BUS BUS OUT BUS BUS BUS SYS BUS BUS BUS SYS BUS BUS BUS SYS GND GND GND GND 1 2 3 4 A B C D E F G (Laser Marking View) 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch Pin A1 Index Mark State Machine + Gate Drivers BUS UVLO TVS OVLO VBUSOK BUS Thermal Shutdown SD ON1 ON2 GND 12 mΩ 24 mΩ CLOAD1 CLOAD2 CLOAD3 CIN Closed Open Closed Open Multiple Contacts Multiple Contacts Regulator VSYS VOUT VBUS BUSOK PG SYS OUT

Ordering Information

Pin Name Pin # Type Pin Description BUS B3, C2, C3, C4, D2, D3, D4, E2, E3, E4, F2, F3, Input IC power supply and load switch input (13 contacts) OUT B1, B2, C1 Output Load switch output to Load (3 contacts) SYS D1, E1, F1 Output Load switch output to VBAT (3 contacts) BUSOK A3 Output Always ON fixed output voltage from internal LDO ON2 B4 Digital Input BUS-to-SYS Switch Enable; Asserted active high digital input; 1 MΩ pull-down ON1 A4 Digital Input BUS-to-OUT Switch Enable; Asserted active low digital input; 1 MΩ pull-down SD A2 Digital Input IC shutdown; asserted active high; 1 MΩ pull-down PG A1 Digital Output Asserted active-high push-pull output. GND G1, G2, G3, G4 GND Analog GND (4 contacts) Part Number Type Production Flow SLG59H1302C WLCSP 28L Industrial, -40 °C to 85 °C SLG59H1302CTR WLCSP 28L (Tape and Reel) Industrial, - 40 °C to 85 °C

Revision 1.03 Page 3 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation Absolute Maximum Ratings Parameter Description Conditions Min. Typ. Max. Unit VBUS to GND Load Switch Input Voltage to Ground Continuous -0.3 -- 28 V V SYS to GND Load Switch Output Voltage to Ground Continuous -0.3 -- 6 V Max pulse width 0.1 s -0.3 -- 7 V V OUT to GND Load Switch Output Voltage to GND ON1 = LOW -0.3 -- V BUS V ESD HBM ESD Protection Human Body Model, All pins 2000 -- -- V ESD CDM ESD Protection Charged Device Model, All pins 1000 -- -- V ESD SURGE ESD Protection VBUS Surge Protection, OUT IDS Maximum Current from BUS to OUT Continuous -0.3 -- 6 A Max pulse width 10 ms -0.3 -- 7 A SYS IDS Maximum Current from BUS to SYS Continuous -0.3 -- 6 A Max pulse width 10 ms -0.3 -- 7 A BUSOK IDS Maximum Current from BUS to BUSOK Continuous -0.3 -- 100 mA θ JA Package Thermal Resistance, Junction-to-Ambient 2.98 x 1.69 mm 28L WLCSP; Determined using a 1 in 2, 1 oz. copper pad under each BUS, SYS, and OUT terminal and FR4 pcb material. -- 45 -- °C/W Note: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at thes e or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Recommended Operating Conditions TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Min. Typ. Max. Unit Basic Operation VBUS IC Power supply and load switch input voltage 2.7 -- 1 3.3 V CIN /C OUT Input and Output Capacitance -- 1 -- µF CSYS SYS Capacitance 47 -- -- µF CBUSOK Output Capacitance -- 4.7 -- µF TA Operating Temperature -40 -- 85 °C

Electrical Characteristics

TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Conditions Min. Typ. Max. Unit Basic Operation (V BUS = 12 V, no load) lQ Input Quiescent Current V BUS = 4 V, ON1 = LOW, No Load -- 180 -- µA

Revision 1.03 Page 4 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation lIN_Q Input Supply Current when V OUT_OVLO or V SYS_OVLO threshold is reached VBUS = 15 V, ON1 = LOW, ON2 = HIGH, BUSOK = 1 kΩ Load -- 4.2 -- mA lSD Shutdown Current V BUS = 12 V -- 1 2 µA VBUS_UVLO Under Voltage Trip Level T A = 0 °C to 85 °C 2.3 2.4 2.7 V tBUS_START Soft-Start Time See timing diagram -- 30 -- ms THERM ON Thermal Shutdown Turn-on Temperature -- 145 -- THERM HYS Thermal Shutdown Hysteresis -- 20 -- °C BUS To OUT Switch VOUT_OVLO Over Voltage Trip Level V BUS Rising 13.3 13.9 14.5 V VOUT_HYS VOUT Hysteresis -- 350 -- mV RDS ON ON Resistance VBUS = 12 V, I OUT = 0.1 A, TA = 25 °C -- 12 14 mΩ VBUS = 12 V, I OUT = 0.1 A, TA = 85 °C -- 16 18 mΩ tDEB_OUT Debounce Time ON1 = 0 V; VBUS > V BUS_UVLO to 0.1 x V OUT ; See timing diagram -- 15 -- ms tON_OUT Switch Turn-On Time RLOAD = 100 Ω, C LOAD = 4.7 µF; VOUT from 0.1 x V BUS to 0.9 x V BUS -- 2.5 -- ms tOVP_OUT

1 Overvoltage Protection Time

ILOAD = 100 mA, no C LOAD ; VBUS step up over V OUT_OVLO to VOUT start separate from V BUS -- 200 -- ns tOFF_OUT Switch Turn-Off Time 50 % ON1 ↑ to 0.9 x V OUT ; VBUS = 12 V RLOAD = 100 Ω, no C LOAD -- 5 -- µs BUS To SYS Switch VSYS_OVLO Over Voltage Trip Level V BUS Rising 4.9 5.25 5.5 V VSYS_HYS VSYS Hysteresis -- 110 -- mV RDS ON ON Resistance VBUS = 4.5 V, I SYS = 0.1 A, TA = 25 °C -- 24 29.6 mΩ VBUS = 4.5 V, I SYS = 0.1 A, TA = 85 °C -- 30 38 mΩ IRCB Reverse Current VSYS = 4.4 V, measured from V BUS to GND 1 -- 10 -- nA tDEB_SYS Debounce Time See timing diagram -- 15 -- ms tSYS_START Soft-Start Time See timing diagram -- 30 -- ms tON_SYS Switch Turn-On Time RLOAD = 100 Ω, C LOAD = 4.7 µF; VSYS from 0.1 x V BUS to 0.9 x V BUS -- 3.0 -- ms Electrical Characteristics (continued) TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Conditions Min. Typ. Max. Unit

Revision 1.03 Page 5 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation tOVP_SYS ILOAD = 100 mA, no C LOAD ; VBUS step up over V SYS_OVLO to VSYS start separate from V BUS -- 200 -- ns tOFF_SYS Switch Turn-Off Time 50 % ON2 ↓ to 0.9 x V SYS ; VBUS = 5 V; RLOAD = 100 Ω, no C LOAD -- 5 -- µs BUSOK VBUSOK BUSOK Output voltage VBUS = 5 V, no load 3.8 4.0 4.4 V VBUS = 12 V, no load 3.8 4.0 4.4 V VBUS = 5 V; BUSOK IDS = 100 mA 3.6 3.8 4.1 V VBUS = 12 V; BUSOK IDS = 100 mA 3.6 3.8 4.1 V Digital Signals VOH_PG PG Output HIGH Voltage ON2 = Low to High, V BUS = 3.4 V to 5 V -- 1.8 -- V VOL_PG PG Output LOW Voltage ON2 = High to Low, V BUS = 3.4 V to 5 V -- -- 0.3 V RPD(ONx, SD) Internal Pull-Down Resistor at ON1 , ON2, and SD -- 1 -- MΩ VIH(ONx, SD) Logic Enable HIGH Voltage 0.9 -- -- V VIL(ONx, SD) Logic Enable LOW Voltage -- -- 0.3 V ILKG(BUSOK) BUSOK Leakage Current -- -- 1 µA ILKG(ONx, SD) SD, ONx Leakage current V BUS = 12 V -- -- 5 µA Notes: 1. Based on bench measurement only. Electrical Characteristics (continued) TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Conditions Min. Typ. Max. Unit

Revision 1.03 Page 6 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation Typical Application Diagram Timing for BUS to OUT Power Up/Down and Normal Oper ation SLG59H1302C OUT SYS Battery Charger System Battery PMIC ON1 ON2 PG BUSOK Travel Adapter or JIG Cable BUS SD GND C1 C2

Revision 1.03 Page 7 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation Timing for BUS to OUT OVLO Operation (ON1 = LOW) “Always ON” based BUSOK Operation (ON1 = X, ON2 = X , SD = LOW)

Since the BUS, SYS and OUT pins dissipate most o f the heat generated during high-load current opera tion, it is highly
To minimize the effects of parasitic trace inductance on normal operation, it is recommended to connect input C IN and output
The GND pin should be connected to system analog or power ground plane.

currents and dedicated only for RDS ON evaluation. evaluation. Figure 1. SLG59H1302C Evaluation Board

Revision 1.03 Page 11 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation Package Top Marking System Definition 59H1302C Pin 1 Identifier Q123456ARR YYWW 59H1302C - Part ID Field Q123456 - Assembly Lot Traceability Code Field A - Assembly Site Code Field 2 RR - Part Revision Code Field 2 YY - Year Code Field 1 WW - Week Code Field 1 Note 1: Each character in code field can be alphanumeric A-Z and 0-9 Note 2: Character in code field can be alphabetic A-Z

28 Lead WLCSP Package

G F E D C B A GND SYS SYS SYS OUT OUT SD GND BUS BUS BUS BUS OUT PG GND BUS BUS BUS BUS BUS BUSOK

Revision 1.03 Page 14 of 15 SLG59H1302C A Surge-protected, 28 V Tolerant Power Splitter in WLCSP ©2022 Renesas Electronics Corporation Tape and Reel Specifications Carrier Tape Drawing and Dimensions Recommended Reflow Soldering Profile Please see IPC/JEDEC J-STD-020: latest revision for reflow profile based on package volume of 1.64 mm 3 (nominal). More information can be found at www.jedec.org. Package Type # of Pins Nominal Package Size [mm] Max Units Reel & Hub Size [mm] Leader (min) Trailer (min) Tape Width [mm] Part Pitch [mm] per Reel per Box Pockets Length [mm] Pockets Length [mm] WLCSP 28L 2.98x1.69 mm 0.4P Green 28 2.98 x 1.69 x 0.44 3000 3000 178/60 100 400 100 400 8 4 Package Type Pocket BTM Length Pocket BTM Width Pocket Depth Index Hole Pitch Pocket Pitch Index Hole Diameter Index Hole to Tape Edge Index Hole to Pocket Center Tape Width Tape Thickness A0 B0 K0 P0 P1 D0 E F W T WLCSP 28L 2.98x1.69 mm 0.4P Green Refer to EIA-481 specification

Revision History

2/2/2022 1.03 Updated Company name and logo Fixed typos 1/6/2019 1.02 Added Layout Guidelines Fixed typos 9/18/2017 1.01 Updated EC Table 6/14/2017 1.00 Production Release

TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com Contact Information For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. (Rev.1.0 Mar 2020) © 2021 Renesas Electronics Corporation. All rights reserved.

Product Information

SLG59H1302C specifications and overview.

Summary

A Surge-protected, 28 V Tolerant Power Splitter in WLCSP 2-Feb-2022

Description

A Surge-protected, 28 V Tolerant Power Splitter in WLCSP 2-Feb-2022

Source title SLG59H1302C Datasheet(PDF) - Renesas Technology Corp

Related Parts

More parts from the same family.

Browse manufacturer