SLG55596AV | DigiCamel IC Datasheet

Online Datasheet

Read SLG55596AV online.

SLG55596AV RENESAS | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 11

Technical content

Features

High Speed USB Switching
Low 4.0 pF (typ) On Capacitance
Low 4.0 Ω (typ) On Resistance
Low 0.5 Ω (typ) On Resistance Flatness
4.5 V to 5.5 V Supply Range
Low Supply Current
Automatic Current-Limit Switch Control
Automatic USB Charger Identification Circuit
CDP Support (active USB 2.0 data communication with

1.5 A charging)

Apple iPad* @ 2.4 A charging current support
Automatic CDP/SDP mode support with SMART-CDP=1 for "Always Data Communication"
Chinese Telecom Standard YD/T 1591-2009 specification support
Samsung Galaxy Tab** charge scheme support
Pb-Free / RoHS Compliant / Halogen-Free
TDFN-8 Package
TQFN-16 Package Pin Configuration * Apple iPhone, iPad and iPod are trademarks of App le Inc., registered in the U.S. and other countries. ** Samsung Galaxy Tab are trademarks of Samsung Ele ctronics, registered in Korea and other countries. VDD SMART-CDP TDP TDM CB DP DM CEN 4 5 Thermal Pad connected to GND TDFN-8 (Top View) FSM Logic One Shot VREF1 VREF1 CEN CB DM DP VREF2 FET VDD TDP TDM Resistor Divider Resistor Divider SMART-CDP

Ordering Information

Pin # Pin Name Type Pin Description 1 CEN Output N-FET Open Drain Output. Current Limit Switch (CLS) Control Output. CB changes from 0 to 1 or 1 to 0. CEN will be low for 2 seconds (typ)

2 DM Input/Output USB Connector D-

3 DP Input/Output USB Connector D+

4 SMART-CDP Input Input Control logic (see truth table )

5 VDD PWR Power Supply. Connect a 0.1 µF capacitor between VDD and GND as close as possible to the device.

6 TDP Input/Output Host USB Transceiver D+ Connection

7 TDM Input/Output Host USB Transceiver D- Connection

8 CB Input

0 = auto-detection charger identification active 1 = charging downstream port with active USB2.0 data communication mode with

1.5 A support

9 Thermal Pad GND Ground

0 0 or 1 DCP autodetect with mouse/keyboard wakeup (P in 4 = 0 or 1) 1 0 S0 charging with SDP only 1 1 S0 charging with CDP or SDP only (depending on external device) And, when Non-CDP phone is plugged in, the CDP mode will be changed automatically to SDP mode during handshaking protocol for supporting data communication. Part Number Type SLG55596AV TDFN-8 SLG55596AVTR TDFN-8 - Tape and Reel

Revision 1.02 Page 3 of 10 SLG55596AV USB Host Charger Identification ©2022 Renesas Electronics Corporation Absolute Maximum Ratings Electrical Characteristics - Power Supply Parameter Min. Max. Unit Supply Voltage -0.3 6.0 V Continuous Current into any terminal -30 +30 mA Continuous Power Dissipation -- 954 mW Operating Temperature Range -40 85 °C Junction Temperature 150 °C Storage Temperature Range -65 150 °C Lead Temperature (Soldering, 10s) 260 °C Note: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at thes e or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit VDD Power Supply Range VCB > V IH 4.5 5.0 5.5 V VCB = 0 V 4.75 -- 5.25 V IDD Supply Current V DD = 5 V CB = LOW, SMART-CDP = X (au - todetect with wakeup) -- 140 160 µA CB = HIGH, SMART-CDP = LOW (SDP) -- 20 30 µA CB = HIGH, SMART-CDP = HIGH (CDP) -- 30 50 µA

Revision 1.02 Page 4 of 10 SLG55596AV USB Host Charger Identification ©2022 Renesas Electronics Corporation Electrical Characteristics - Analog Switch Electrical Characteristics - Dynamic Performance VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit VDP , V DM Analog signal Range 0 -- V DD V RON On Resistance TDP/TDM Switch VDD = -0.4 V to 0.4 V, I = 10 mA -- 3.5 -- Ω VDP = V DM = 0 V to 3.3 V VDD = 5 V -- 4.0 7 Ω ΔRON On Resistance Match between channels TDP/TDM Switch V DD = 5.0V VDP = V DM = 400 mV IDP = I DM = 10 mA -- 0.1 -- Ω RFLAT On Resistance flatness TDP/TDM Switch V DD = 5.0 V VDP = V DM = 0 V to V DD IDP = I DM = 10 mA -- 0.5 -- Ω RSHORT On Resistance of TDP/TDM Short VCB = 0 V VDP = 1 V IDP = I DM = 10 mA -- 50 70 Ω ITDPOFF , ITDMOFF Off-Leakage Current VDD = 3.6V VDP = V DM = 0.3 V to 3.3 V VTDP = V TDM = 3.3 V to 0.3 V VCB = 0 V -250 -- 250 nA IDPON , IDMON Off-Leakage Current VDD = 3.6 V VDP = V DM = 3.3 V to 0.3 V VCB = V DD -250 -- 250 nA VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit TON Turn On Time VTDP or V TDM = 1.5 V RL = 300 Ω CL = 35 pF --‘ 20 100 µs TOFF Turn Off Time VTDP or V TDM = 1.5 V RL = 300 Ω CL = 35 pF --‘ 1 5 µs TPLH , T PHL TDP/TDM Switch Propagation Delay R L = R S = 50 Ω -- 60 -- ps TSKEW Output Skew Skew between DP and DM when connected to TDP and TDM R L = R S = 50 Ω -- 40 -- ps COFF TDP/TDM Off-Capacitance f = 1 MHz --‘ 2.0 -- pF CON DP/DM On-Capacitance f = 240 MHz --‘ 4.0 5.5 pF BW -3 dB Bandwidth R L = R S = 50 Ω -- 1000 -- MHz VISO Off-Isolation VTDP, VDP = 0 dBm RL = R S =50 Ω f = 250 MHz -- -20 -- dB VCT Crosstalk VTDP, VDP = 0 dBm RL = R S = 50 Ω f = 250 MHz -- -25 -- dB

Revision 1.02 Page 5 of 10 SLG55596AV USB Host Charger Identification ©2022 Renesas Electronics Corporation Electrical Characteristics - Internal Resistors Electrical Characteristics - Logic Input CB Electrical Characteristics - Logic Input SMART-CDP Electrical Characteristics - CEN Outputs Electrical Characteristics - ESD Protection VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit RPD DP/DM Short Pull-down 350 500 700 kΩ RT RP RP1/RP2 Ratio 0.8544 0.863 0.872 Ratio RRP RP1 + RP2 Resistance 69.75 93.0 115.18 kΩ RT RM RM1/RM2 Ratio 0.8544 0.863 0.872 Ratio RRM RM1 + RM2 Resistance 69.75 93.0 115.18 kΩ VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit VIH CB Input Logic High 1.4 -- -- V VIL CB Input Logic Low -- -- 0.4 V IIN CB Input Leakage Current VDD = 5.5 V 0 ≤ VCB ≤ VIL or V IH ≤ VCB ≤ VDD -1 -- 1 µA VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit VIH SMART-CDP input Logic High 3.0 -- -- V VIL SMART-CDP input Logic Low -- -- 0.8 V IIN SMART-CDP Input Leakage Current VDD = 5.5V

0 V < V SMART-CDP < V IL or

VIH < V SMART-CDP < V DD -1 -- 1 µA VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit TVBT VBUS Toggle Time CB = Logic 0 to Logic 1 or Logic 1 to Logic 0 1.5 2.0 2.5 s V OL_CEN CEN Output Logic Low Voltage CB = Logic 0 to Logic 1 I SINK = 2 mA -- -- 0.4V V IOUT_CEN CEN Output Leakage Current VDD = 5.5 V VCEN = 5.5 V or CEN deasserted -- -- 1 µA VDD = 4.5 V to 5.5 V, T A = 25 °C (unless specified otherwise) Parameter Description Condition/Note Min. Typ. Max. Unit VESD ESD Protection Level (DP and DM Only) Human Body Model -- ±8 -- kV V ESD ESD Protection Level (All other pins) Human Body Model -- ±2 -- kV

Revision 1.02 Page 7 of 10 SLG55596AV USB Host Charger Identification ©2022 Renesas Electronics Corporation Package Top Marking System Definition Part ID Assembly Code Datecode Lot Revision 8 7 6 5 1 2 3 4 – Part ID Field: identifies the specific device configuration – Assembly Code Field: Assembly Location of the device. – Date Code Field: Coded date of manufacture – Lot Code: Designates Lot # – Revision Code: Device Revision XX A DD L R

8 Lead TDFN Package

JEDEC MO-229, Variation WCCD IC Net Weight: 0.0095 g

Revision 1.02 Page 9 of 10 SLG55596AV USB Host Charger Identification ©2022 Renesas Electronics Corporation Tape and Reel Specifications Carrier Tape Drawing and Dimensions Recommended Reflow Soldering Profile Please see IPC/JEDEC J-STD-020: latest revision for reflow profile based on package volume of 3.00 mm 3 (nominal). More information can be found at www.jedec.org. Package Type # of Pins Nominal Package Size [mm] Max Units Reel & Hub Size [mm] Leader (min) Trailer (min) Tape Width [mm] Part Pitch [mm] per Reel per Box Pockets Length [mm] Pockets Length [mm] TDFN 8L Green 8 2 x 2 x 0.75 3,000 3,000 178 / 60 100 400 100 400 8 4 Package Type Pocket BTM Length Pocket BTM Width Pocket Depth Index Hole Pitch Pocket Pitch Index Hole Diameter Index Hole to Tape Edge Index Hole to Pocket Center Tape Width A0 B0 K0 P0 P1 D0 E F W TDFN 8L W EP0 Y Y Section Y-Y CL F Refer to EIA-481 specification

Revision History

2/8/2022 1.02 Updated Company name and logo Fixed typos 5/27/2020 1.01 Updated Style and formatting 4/22/2014 1.00 Production Release

TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com Contact Information For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. (Rev.1.0 Mar 2020) © 2021 Renesas Electronics Corporation. All rights reserved.

Product Information

SLG55596AV specifications and overview.

Summary

USB Host Charger Identification 8-Feb-2022

Description

USB Host Charger Identification 8-Feb-2022

Source title SLG55596AV Datasheet(PDF) - Renesas Technology Corp

Related Parts

More parts from the same family.

Browse manufacturer