SLF7045T-151MR40-PF

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Inductors for Power Circuits SLF7045 Type SLF Series

(2/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 30°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose

applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. REMINDERS

(3/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. Inductors for Power Circuits Wound Ferrite

FEATURES

Magnetic shield type wound inductor for power circuits. Product lineup allows for various usages. APPLICATION Thin-screen TV , LCDs, AV equipment, gaming equipment, other electrical devices PART NUMBER CONSTRUCTION OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT /g13/g3Operating temperature range includes self-temperature rise. /g13/g13/g3The Storage temperature range is for after the circuit board is mounted. Product compatible with RoHS directive Compatible with lead-free solders Overview of SLF7045 Type SLF 7045 T - 3R3 M 2R5 - PF Series name L×W×H Dimensions Packaging style Inductance Inductance tolerance Rated current Internal code(mm) (μH) (A) 100 10 N ±30% 2R5 2.5 101 100 150 15 Type Temperature range Package quantity Individual weight Operating temperature/g13 ʢ°Cʣ Storage temperature/g13/g13 ʢ°Cʣ (pieces/reel) ʢgʣ SLF7045 –40 to +105 –40 to +105 1000 0.6 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/

(4/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. SLF7045 Type RECOMMENDED REFLOW PROFILE Preheating Soldering Peak Temp. Time Temp. Time Temp. Time T1 T2 t1 T3 t2 T4 t3 150°C 180°C 60 to 120s 230°C 30s 250°C 5s Natural cooling Preheating Soldering T3 T3 t: Time Peak T: Temperature

(5/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. SLF7045 Type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN Dimensions in mm 7±0.2 7±0.2 2±0.1 4.5±0.3 4R7 4.9 0.90.9 Dimensions in mm4.8 1.51.5 2.2

(6/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. SLF7045 Type

ELECTRICAL CHARACTERISTICS

CHARACTERISTICS SPECIFICATION TABLE /g13/g3Rated current: smaller value of either Isat or Itemp. Isat: When based on the inductance change rate (10% below the initial value) Itemp: When based on the temperature increase (Temperature increase of 20°C by self heating) ˓Measurement equipment ˎ Equivalent measurement equipment may be used. L L measuring frequency DC resistance Rated current/g13 Part No. Isat Itemp (μH) Tolerance (kHz) (/g58)±20% (A)max. (A)max. 3.3 ±20% 100 0.02 2.5 2.3 SLF7045T -3R3M2R5-PF 4.7 ±20% 100 0.03 2 2.1 SLF7045T -4R7M2R0-PF 6.8 ±20% 100 0.039 1.7 1.74 SLF7045T -6R8M1R7-PF 10 ±20% 100 0.036 1.3 1.78 SLF7045T -100M1R3-PF 15 ±20% 100 0.052 1.1 1.53 SLF7045T -150M1R1-PF 22 ±20% 100 0.061 0.9 1.34 SLF7045T -220MR90-PF 33 ±20% 100 0.096 0.82 1.09 SLF7045T -330MR82-PF 47 ±20% 100 0.125 0.75 0.92 SLF7045T -470MR75-PF 68 ±20% 100 0.175 0.6 0.77 SLF7045T -680MR60-PF 100 ±20% 100 0.25 0.5 0.65 SLF7045T -101MR50-PF 150 ±20% 100 0.34 0.4 0.55 SLF7045T -151MR40-PF 220 ±20% 100 0.52 0.33 0.45 SLF7045T -221MR33-PF 330 ±20% 100 0.74 0.25 0.37 SLF7045T -331MR25-PF 470 ±20% 100 1.05 0.22 0.31 SLF7045T -471MR22-PF 680 ±20% 100 1.48 0.2 0.27 SLF7045T -681MR20-PF 1000 ±20% 100 2.28 0.14 0.25 SLF7045T -102MR14-PF Measurement item Product No. Manufacturer L 4194A Keysight Technologies DC resistance VP-2941A Panasonic Rated current Isat 4284A+42841A+42842C Keysight Technologies

(7/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. SLF7045 Type L FREQUENCY CHARACTERISTICS GRAPH ˓Measurement equipment ˎ Equivalent measurement equipment may be used. 100 10000 1000 1 10 100 1000 10000 100000 1000000 Inductance(μH) Frequency(kHz) 471M 331M 102M 681M 101M 680M 221M 151M 470M 150M 100M 6R8M 4R7M 3R3M 330M 220M Product No. Manufacturer 4294A Keysight Technologies

(8/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. SLF7045 Type INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH ˓Measurement equipment ˎ Equivalent measurement equipment may be used. 100 1000 10000 012 DC current(A) Inductance(μH) 680M 101M 151M 221M 331M 471M 681M 102M 3R3M 100M 6R8M 4R7M 220M 330M 470M 150M Product No. Manufacturer 4284A+42841A+42842C Keysight Technologies

(9/9) INDUCTORS 20160411 / inductor_commercial_power_slf7045_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. SLF7045 Type PACKAGING STYLE REEL DIMENSIONS * These values are typical values. TAPE DIMENSIONS Type A W1 W2 N E SLF7045 ø330 16.4 22.4 ø50 2 ø13.0±0.5 ø21.0±0.8 2.0±0.5 A (1.0) Dimensions in mm N E FE W P0 P2 øD0 P1 A t B K Dimensions in mm Type A B øD0 E F P0 P1 P2 W K t