SLD10UDD POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Two independently regulated outputs
- Efficiency in excess of 90%
- 10A of combined output current at 65°C and 200LFM
- Flexible output load distribution
- Output overcurrent protection
- Remote ON/OFF
- Output voltage trim adjust for each output
- Straight and right angle pins configurations
Description
The SLD10 series of DC/Dc converters provide two independently regulated low-voltage outputs from a single 3.3V or 5V input. Each output can provide up to 6A of output current and has an independent feedback loop and an independent trim function. These non-isolated point-of-load converters are through hole mounted. High efficiency, low space requirements, and flexible loading characteristics make these converters ideal multivoltage sources for powering ASICs. 3.3V Input 5 V Input 3.3V input Model Input voltage range, VDC Vout1, VDC Vout2, VDC Eff. 5V input Model Input voltage range, VDC Vout1, VDC Vout2, VDC Eff. SLD10VBB 4.5-5.5 1.8 1.8 89 SLD10VBA 4.5-5.5 1.8 1.5 88 SLD10VBY 4.5-5.5 1.8 1.2 87 SLD10VAA 4.5-5.5 1.5 1.5 87 SLD10VAY 4.5-5.5 1.5 1.2 86 Both outputs of the SLD10U and SLD10V can be loaded up to six (6) amps each. Note: The maximum combined output is ten (10) amps. SLD10VYY 4.5-5.5 1.2 1.2 85
SLD10 Series – 10A Non-Isolated DC/DC Converter 5V, 3.3V Input Dual Output REV. 07/01 Page 2 of 2 www.power-one.com Mechanical Drawing – Dimensions shown in inches (millimeters) Pin Function 1V i n 2G N D 3G N D 4T r i m 2
5 Vout2
6 Vout1
10 ON/OFF
11 Vin
Ordering Information
Options Suffixes to add to part number Straight (top drawing) - Standard, no suffix requiredPin Configuration Right Angle (bottom drawing) - Add “R” suffix Notes 1. Consult factory for the complete list of available options. 2. Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. 3. Specifications are subject to change without notice. Tolerances: