SLD-50

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

50W linear LED Driver SLD-50 seri es File Name:SLD-50-SPEC 2019-11-13

VOLTAGE RANGE Note.5 FREQUENCY RANGE POWER FACTOR EFFICIENCY (Typ.) AC CURRENT INPUT INRUSH CURRENT(Typ.) LEAKAGE CURRENT WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF DIMENSIONOTHERS NOTE PACKING OVER VOLTAGE 47 ~ 63Hz 20 ~ 95% RH non-condensing ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes 1304.51K hrs min. Telcordia SR-332 (Bellcore) ; 362.82K hrs min. MIL-HDBK-217F (25℃) ENVIRONMENT SAFETY & EMC PROTECTION SHORT CIRCUIT I/P-O/P:3.75KVAC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH WITHSTAND VOLTAGE ISOLATION RESISTANCE TOTAL HARMONIC DISTORTION DC VOLTAGE RATED CURRENT RATED POWER Note.5 LINE REGULATION LOAD REGULATION SETUP, RISE TIME Note.6 HOLD UP TIME (Typ.) RIPPLE & NOISE (max.) Note.3 VOLTAGE TOLERANCE Note.4 CONSTANT CURRENT REGION Note.2 OVER CURRENT SAFETY STANDARDS COLD START 50A(twidth=270 s measured at 50% Ipeak) at 230VACμ ; Per NEMA 410 MAX. No. of PSUs on 16A CIRCUIT BREAKER 8 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC MAX. CASE TEMP. Tcase=+90℃ (Please refer to "STATIC CHARACTERISTIC" section) 110 ~ 305VAC 155 ~ 431VDC 50W Constant Voltage+Constant Current LED Driver 95 ~ 108% Hiccup mode, recovers automatically after fault condition is removed Constant current limiting or Hiccup mode, recovers automatically after fault condition is removed PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 10%(@load≧60%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) Tcase=-20 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) Shut down and latch off o/p voltage, re-power on to recover 12V 24V 8.4 ~12V 16.8 ~24V 4.2A 2.1A 50.4W 50.4W SLD-50-12 SLD-50-24 88% 90% 0.6A / 115VAC 0.3A / 230VAC 0.25A/277VAC 150mVp-p 240mVp-p ±4.0% ±3.0% ±0.5% ±0.5% ±1.5% ±0.5% 10ms/230VAC 10ms/115VAC 500ms, 80ms 115VAC / 230VAC <0.25mA / 277VAC 28 ~ 34V14 ~ 17V UL8750(type”HL”),CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, EAC TP TC 004, GB19510.1,GB19510.14 0.175Kg;64pcs/12.4Kg/ 0.67CUFT <0.5WNO LOAD POWER CONSUMPTION File Name:SLD-50-SPEC 2019-11-13 OVER TEMPERATURE Shut down output voltage, re-power on to recover Parameter Parameter ESD Radiated EFT / Burst Surge Conducted Magnetic Field Voltage Dips and Interruptions Conducted Radiated Harmonic Current Voltage Flicker EN61547 Standard Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Test Level / Note Test Level / Note Level 3, 8KV air ; Level 2, 4KV contact Level 2 Level 2 Level 2 Level 2 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods EMC IMMUNITY EMC EMISSION 1KV/Line-Line EN55015(CISPR15) ,GB/T17743 EN61000-3-2,GB/T17625.1 EN61000-3-3 ----- ----- Class C @load≥60% ----- EN55015(CISPR15) ,GB/T17743

RATED POWER Note.2 FULL POWER CURRENT RANGE OUTPUT CURRENT ADJ. RANGE VOLTAGE RANGE Note.2 FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INPUT INRUSH CURRENT(Typ.) LEAKAGE CURRENT WORKING HUMIDITY STORAGE TEMP. VIBRATION OVER VOLTAGE OVER TEMPERATURE 47 ~ 63Hz 0.6A / 115VAC 0.3A / 230VAC 0.25A / 277VAC <0.25mA / 277VAC 20 ~ 95% RH non-condensing -40 ~ +80℃ 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes ENVIRONMENT PROTECTION SHORT CIRCUIT 90% COLD START 50A(twidth=270 s measured at 50% Ipeak) at 230VAC;μ Per NEMA 410 TOTAL HARMONIC DISTORTION CONSTANT CURRENT REGION Note.3 MAX. NO. of PSUs on 16A CIRCUIT BREAKER 8 unit(circuit breaker of type B) / 16 units(circuit breaker of type C) at 230VAC Hiccup mode, recovers automatically after fault condition is removed (Please refer to "STATIC CHARACTERISTIC" ang “ DRIVING METHODS OF LED MODULE"section) 110 ~ 305VAC 155VDC ~ 431VDC OPEN CIRCUIT VOLTAGE (max.) 61 ~ 80V Shut down output voltage, re-power on to recovery TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 60℃) WORKING TEMP. Tcase=-20 ~ +90℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) MAX. CASE TEMP. Tcase=+90℃ PF 0.97 / 115VAC, PF 0.95 / 230VAC full load≧ ≧ , PF≧0.92 / 277VAC at (Please refer to " " )Power Factor Characteristic section THD< 10% (@ load≧60% at 115VAC/230VAC ,@load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section CURRENT RIPPLE 5.0%(@rated current) CURRENT TOLERANCE ±5% SET UP TIME Note.5 500ms/230VAC, 1200ms/115VAC 50.4W 1050mA 30 ~56V 60V 450-1400mA 900~1400mA SLD-50-56 Shut down output voltage, re-power on to recovery OVER POWER 110 ~ 150% Hiccup mode, recovers automatically after fault condition is removed SL D-50 seri es50W Constant Power Mode LED Driver <0.5WNO LOAD POWER CONSUMPTION MTBF 1304.51K hrs min. Telcordia SR-332 (Bellcore) ; 362.82K hrs min. MIL-HDBK-217F (25℃) SAFETY & EMC I/P-O/P:3.75KVAC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY STANDARDS UL8750(type”HL”),CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, EAC TP TC 004, GB19510.1,GB19510.14 Parameter Parameter ESD Radiated EFT / Burst Surge Conducted Magnetic Field Voltage Dips and Interruptions Conducted Radiated Harmonic Current Voltage Flicker EN61547 Standard Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Test Level / Note Test Level / Note Level 3, 8KV air ; Level 2, 4KV contact Level 2 Level 2 Level 2 Level 2 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods EMC IMMUNITY EMC EMISSION 1KV/Line-Line EN61000-3-3 ----- ----- Class C @load≥60% ----- DIMENSIONOTHERS PACKING 0.175Kg;64pcs/12.4Kg/ 0.67CUFT File Name:SLD-50-SPEC 2019-11-13 EN55015(CISPR15) ,GB/T17743 EN61000-3-2,GB/T17625.1 EN55015(CISPR15) ,GB/T17743

※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. DRIVING METHODS OF LED MODULE Typical output current normalized by rated current (%) In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. 100 (min.) Vo(%) 50 100 Io(%) (B) Constant Current area (C) Hiccup Protection (A) Constant V areaoltage DETECTION PWM & PFC CIRCUIT EMI FILTER RECTIFIERS POWER SWITCHING FILTER RECTIFIERS Vo+ Vo-I/P CONTROL O.V.P. O.L.P. PFC CIRCUIT PFC fosc : 50~120KHz PWM fosc : 60~130KHz File Name:SLD-50-SPEC 2019-11-13 ◎ SLD-50-12,24 ◎ SLD-50-56 900mA,56V 1400mA, 36V 1400mA,30V900mA,30V 450mA,56V 25V 30V 35V 40V 45V 50V 55V 60V 0mA 300mA 600mA 900mA 1200mA 1500mA Recommend Performance Region

OUTPUT LOAD vs TEMPERATURE STATIC CHARACTERISTIC TOTAL HARMONIC DISTORTION (THD) AMBIENT TEMPERATURE,Ta ( )℃ LOAD (%) INPUT VOLTAGE (V) 60Hz LOAD (%) (HORIZONTAL) POWER FACTOR (PF) CHARACTERISTIC ※De-rating is needed under low input voltage. EFFICIENCY vs LOAD SLD-50 series possess superior working efficiency that up to 90% can be reached in field applications.※24V Model, Tcase at 75 ℃ ※24V Model, Tcase at 75 ℃ EFFICIENCY(%) LOAD THD LOAD ※Tcase at 75 ℃ 50W linear LED Driver Constant Current Mode LOAD (%) (HORIZONTAL)0-15 15 30 50 60 90 Tcase ( )℃ - 2 0 - 1 00 1 53 05 06 07 0 100 100 -20 100 110 125 135 145 155 165 175 180 200 230 305 100 230VAC 110VAC File Name:SLD-50-SPEC 2019-11-13 0.3 0.4 0.5 0.6 0.7 0.8 0.9 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 277V 230V 115V 78% 80% 82% 84% 86% 88% 90% 92% 94% 96% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 277V 230V 115V 50% 60% 70% 80% 90% 100% 277V 230V 115V

SLD-50 series50W linear LED Driver File Name:SLD-50-SPEC 2019-11-13 LIFE TIME 100 120 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Tcase (℃) LIFETIME (Kh) INSTALLATION MANUAL Please refer to http://www.meanwell.com/manual.html: Mechanical Specification Unit:mm 280 113.6Tc a s e 20.1 ※T case: Max. Case Temperature. 16.8 272 4 2-φ3.5 TB1 56V with Io adjustable Terminal Pin No. Assignment (TB1) : DEGSON DG219-3.5(GRAY) Terminal Pin No. Assignment (TB2) : DEGSON DG219-3.5(RED/BLACK) Pin No. Pin No. Assignment Assignment AC/N -V AC/L +V 9-10mm /c48/c46/c55/c53/c45/c49/c46/c53/c48/c109/c109 /c50 /c84/c66/c50/c32/c119/c105/c114/c105/c110/c103/c58 9-10mm /c48/c46/c55/c53/c45/c49/c46/c53/c48/c109/c109 /c50 /c84/c66/c49/c32/c119/c105/c114/c105/c110/c103/c58 TB2