SL32 JUXING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Ultrafast reverse recovery time Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Major Ratings and Characteristics Case: JEDEC DO-214AC molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D I F(AV) 3.0A V RRM
20 V to 60 V
I FSM 100A V F 0.40V, 0.65 V Polarity: Laser band denotes cathode end Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle. T j max. 125 °C Items Symbol SL32 SL33 SL34 SL36 UNIT Maximum repetitive peak reverse voltage V RRM 20 30 40 60 V Maximum RMS voltage V RMS 14 21 28 42 V Maximum DC blocking voltage V DC 20 30 40 60 V AMaximum average forward rectified current I F(AV) A V/µs Peak forward surge current 8.3 ms single half sine- wave superimposed on rated load I FSM 100 Voltage rate of change (rated V R ) dv/dt 10000 ℃/W Thermal resistance from junction to lead (1) R θJL Operating junction and storage temperature range T T STG –65 to +125 Items Test conditions Symbol SL32~34 Instantaneous forward voltage I F =3.0A (2) V F 0.40 mA UNIT V SL36 0.65 V R DC T A =25℃ I R 1.0 Reverse current T A =100℃ 20 http://www.trr-jx.com
SL32~SL36 Characteristic Curves A =25 ℃ unless otherwise noted) http://www.trr-jx.com Surface Mount Low VF Schottky Rectifiers
SL32~SL36 Package Outline Notice Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . I FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general during the lifespan of the device. T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this specification to improve reliability,functional characteristics,or design without notice. Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification. Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com Surface Mount Low VF Schottky Rectifiers