SL24F_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
7KHSODVWLFSDFNDJHFDUULHV8QGHUZULWHUV/DERUDWRU\\ )ODPPDELOLW\\&ODVVLILFDWLRQ 95R+6FRPSOLDQW , GHDIRUSULQWHGFLUFXLWERDUG 2SHQ-XQFWLRQFKLS /RZUHYHUVHOHDNDJH +LJKIRUZDUGVXUJHFXUUHQW FDSDELOLW\\ +LJKWHPSHUDWXUHVROGHULQJJXDUDQWHHG ¥VHFRQGVDWWHUPLQDOV Dimensions in inches and (millimeters) Reverse Voltage - 40 to 60 Volts Forward Current - 2.0 Ampere SMAF 0.193(4.90) 0.173(4.40) 0.047(1.20) 0.031(0.80) 0.008(0.20) 0.005(0.12) 0.047(1.20) 0.035(0.90) 0.146(3.70) 0.130(3.30) 0.063 (1.60) 0.051 (1.30) 0.106(2.70) 0.094(2.40) Mechanical Data Case: 60$) molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Polarity symbol marking on body Mounting Position: Any Weight : 0.00 ounce, 0.07 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS SL24F SL26F UNITS Marking Code MDD SL24F MDD SL26F Maximum repetitive peak reverse voltage VRRM 40 60 V Maximum RMS voltage VRMS 28 42 V Maximum DC blocking voltage VDC 40 60 V Maximum average forward rectified current at TL(see fig.1) I(AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 50 A Maximum instantaneous forward voltage at 2.0A VF 0.45 0.52 V Maximum DC reverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 0.5 10.0 0.3 5.0 mA Typical junction capacitance (NOTE 1) CJ 290 130 pF Typical thermal resistance (NOTE 2) RJA 70.0 ℃/W Operating junction temperature range TJ - 5 5t o+ 1 5 0 ℃ Storage temperature range TSTG -55 to +150 ℃ 3.The typical data above is for reference only.
Rev:2019A0 Page :2 Typical Characterisitics The curve above is for reference only. https://www.microdiode.com SL24F THRU SL26F Reverse Voltage - 40 to 60 Volts Forward Current - 2.0 Ampere Fig.4 Typical Junction Capacitance 0.1 Junction Capacitance (pF) Reverse Voltage (V) 100 200 500 1001 SSL24W SSL26W TJ=25°C 1001 Fig.5 Maximum Non-Repetitive Peak Forward Surage Current Peak Forward Surage Current (A) Number of Cycles at 60Hz Fig.2 Typical Reverse Characteristics Instaneous Reverse Current ( μ A) 20 40 60 800 TJ=25°C TJ=100°C Percent of Rated Peak Reverse Voltage（%） 100 10 0 101 10 2 10 3 10 4 TJ=75°C SSL24W SSL26W Fig.3 Typical Forward Characteristic Instaneous Forward Current (A) Instaneous Forward Voltage (V) 0.1 0 0.5 1.0 1.5 2.0 SSL24W SSL26W 0.01 100 100 Fig.6- Typical Transient Thermal Impedance Transient Thermal Impedance（ °C/W） t, Pulse Duration（sec） 0.1 1 10 Fig.1 Forward Current Derating Curve 0.5 1.0 1.5 2.0 2.5 3.0 0.0 25 50 75 100 125 150 Average Forward Current (A) Single phase half-wave 60 Hz resistive or inductive load Case Temperature (°C) 8.3 ms Single Half Sine Wave (JEDEC Method)
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout 0.087 0.213 Symbol Unit (mm) A C D 0.063 5.4 2.2 E B Unit (inch) 0.150 1.6 0.0711.8 E B d F W PA D D1D2 C T Item Tolerance SMAF Carrier width Carrier length Carrier depth Sprocket hole 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Reel width W1 Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1.50 178.00 54.40 13.00 1.75 5.05 4.00 4.00 2.00 0.30 8.00 12.30 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2.80 4.75 1.42 Reel packing SMAF 7" 3,000 4.0 6,000 210*208*203 178 400*265*400 120,000 10.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) 3.8 SL24F THRU SL26F Reverse Voltage - 40 to 60 Volts Forward Current - 2.0 Ampere