SL03 MCC | Alldatasheet
Document overview
- Manufacturer or author: acer
- PDF pages: 2
Technical content
Features
l SOT-23 Package For surface mount application l Protects 3.0/3.3 up through 24V Components l Protects 1 Unidirectional line l Provides electrically isolated protection l Tape & Reel EIA Standard 481. Mechanical Data l Molded: SOT-23 Surface Mount l Body marked with device number. l Mounting Position: Any l Weight: 0.14 grams (approx.) MAXIMUM RATINGS § Operating Temperature: -55oC to +150oC § Storage Temperature: -55oC to +150oC § SL03 thru SL24 have a Peak Pulse Power: 300 Watts (8/20 usec, Figure 1) § Pulse Repetition Rate: <.01%
Description
This product provides unidirectional protection for 1 SL03 THRU SL24 Transient Voltage Suppressor
300 Watt
A .110 .120 2.80 3.04 B .083 .098 2.10 2.64 C .047 .055 1.20 1.40 D .035 .041 .89 1.03 E .070 .081 1.78 2.05 F .018 .024 .45 .60 G .0005 .0039 .013 .100 H .035 .044 .89 1.12 J .003 .007 .085 .180 K .015 .020 .37 .51 A BC D EF G H J .079 2.000 inches mm .031 .800 .035 .900 .037 .950 .037 .950 www.mccsemi.com line by connecting the input/output line to pin 1, pin 2 to common or ground and pin 3 (is not connected). The SL03 thru SL24 product provides board level protection from static electricity and other induced-voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such as DRAM's, SRAM's, COMS, HCOMS, HSIC, and low volt. interfaces up to 24 volts. Because of the physical size, weight and protection capabilities, this product is ideal for use in but not limited to miniaturized electronic equipment such as hand held instruments, computers, computer peripherals and cell phones. /G01/G02/G03/G04/G05/G06/G07/G05/G08/G08/G09/G04/G03/G02/G0A/G0B/G06/G07omponents
21201 Itasca Street Chatsworth
/G07/G18/G06/G19/G0F/G1A/G0F/G0F /G1B/G15/G05/G1C/G09/G1D/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G1A /G24/G0A/G25/G1D/G06/G06/G06/G1E/G1F/G0F/G1F/G20/G06/G21/G10/G0F/G22/G23/G19/G1A/G19 MCC
MOUNTING PAD SOT23 CIRCUIT DIAGRAM 0 10 20 30 100 t -- Time in microsec Ipp -- Peak Pulse Current -- % Ipp Peak Value -- Ipp Half-Value -- Ipp
8 X 20 Waveform
t t d FIGURE 2 Pulse Wave Form FIGURE 1 Peak Pulse Power Vs Pulse Time 100ns 1µs 10µs 100µs 1ms 10ms td – PULSE TIME - SEC 100 1.0 .10PPP - PEAK PULSE POWER 8/20 µs 300 W pulse SL03 thru SL24 ELECTRICAL CHARACTERISTICS @ 25ºC Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR @1 mA VOLTS CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS LEAKAGE CURRENT ID @ VWM µA CAPACITANCE @0V, 1 MHz C pF TEMPERATURE COEFFICIENT OF VBR áVBR mV/ºC PART NUMBER DEVICE MARKING MIN MAX MAX MAX MAX MAX SL03 L03 3.3 4 8 11 200 3 -5 SL05 L05 5.0 6.0 10.8 13 100 3 3 SL12 L12 12.0 13.3 19 26 1 3 10 SL15 L15 15.0 16.7 25 32 1 3 13 SL24 L24 24.0 26.7 44 57 1 3 30 NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. www.mccsemi.com MCC