SL22B_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications M etal silicon junction,majority carrier conduction Low power loss,high efficiency B uilt-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 260°C/10 seconds at terminals Case : JEDEC DO-214AA/SMB Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.003ounce, 0.093 grams Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unlss otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Dimensions in inches and (millimeters) DO-214AA/SMB 0.060(1.52) 0.030(0.76) 0.220(5.59) 0.200(5.08) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX. 0.096(2.44) 0.084(2.13) 0.086 (2.20) 0.071 (1.80) 0.185(4.70) 0.160(4.06) 0.155(3.94) 0.130(3.30) Parameter SYMBOLS SL22B SL23B SL24B SL25B SL26B SL28B SL210B UNITS Marking Code MDD SL22B MDD SL23B MDD SL24B MDD SL25B MDD SL26B MDD SL28B MDD SL210B Maximum repetitive peak reverse voltage VRMM 20 30 40 50 60 80 100 V Maximum RMS voltage VRMS 14 21 28 35 42 56 70 V Maximum DC blocking voltage VDC 20 30 40 50 60 80 100 V Maximum average forward rectified current at TL=90℃ I(AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 50 A Maximum instantaneous forward voltage at 2.0A VF 0.45 0.50 0.70 V Maximum DCreverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 0.5 10.0 0.2 5.0 mA Typical junction capacitance (NOTE 1) CJ 220 180 pF Typical thermal resistance ( NOTE 2) RJA 68.0 ℃/W Operating junction and storage temperaturerange TJ,TSTG - 5 5t o+ 1 5 0 ℃ Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.The typical data above is for reference only.
Rev:2019A0 Page :2 Ratings And Characteristic Curves https://www.microdiode.com Reverse Voltage - 20 to 100 Volts Forward Current - 2.0 Ampere SL22B THRU SL210B The curve above is for reference only. 2.0 1.6 1.2 0.8 0.4 0 25 50 75 100 125 150 175 0.1 1.0 10 100 0.01 0.1 1 10 100 100 0.1 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE NUMBER OF CYCLES AT 60 Hz FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERESJUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES 1 10 100 8.3ms SINGLE HALF SINE-WAVE 100 1000 2000 0 20 40 60 80 100 100 0.1 0.01 0.001 TJ=75 C TJ=25 C TJ=100 C PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TRANSIENT THERMAL IMPEDANCE, C/W SL22B-SL26B SL28B-SL210B Single Phase Half Wave 60Hz Resistive or inductive Load FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,AMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25 C SL22B-SL24B SL25B-SL210B LEAD TEMPERATURE, C 10.0 0.1 0.01 TJ=25 C SL22B-SL24B SL25B-SL26B SL28B-SL210B P.C.B mounted on copper pad areas
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing Reverse Voltage - 20 to 100 Volts Forward Current - 2.0 Ampere SL22B THRU SL210B Item Symbol Tolerance SMB Carrier width A0 . 1 3 . 8 1 Carrier length B 0.1 5.41 Carrier depth C 0.1 2.42 Sprocket hole d 0.05 1 5.0 13" Reel outside diameter D 2.0 330.00 13" Reel inner diameter D1 min 50.00 Feed hole diameter D2 0.5 13.00 Sprocket hole position E0 . 1 1 . 7 5 Punch hole position F 0.1 5.55 Punch hole pitch P 0.1 8.00 Sprocket hole pitch P0 0.1 4.00 Embossment center P1 0.1 2.00 Overall tape thickness T 0.1 0.30 Tape width W 0.3 12.00 Reel width W1 1.0 12.30 unit:mm PACKAGE REEL SIZE REEL (pcs) COMPONENT SPACING (mm) BOX (pcs) INNER BOX (mm) REEL DIA, (mm) CARTON SIZE (mm) CARTON (pcs) APPROX. GROSS WEIGHT (kg) SMB 13" 3,000 4.0 10,000 190*190*41 330 365*365*360 80,000 14.0 Symbol Unit (mm) Unit (inch) A2 .8 0 .110 B 2.4 0.094 C4 .6 0 .181 D2 .2 0 .086 E7 .0 0 .276