SL22A_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications M etal silicon junction,majority carrier conduction Low power loss,high efficiency B uilt-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 260°C/10 seconds at terminals DO-214AC/SMA Dimensions in inches and (millimeters) Case : JEDEC DO-214AC/SMA Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.002ounce, 0.055 grams Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unlss otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. 0.208(5.30) 0.067 (1.70) 0.051 (1.30) 0.177(4.50) 0.15 7(3.99) 0.110(2.80) 0.094(2.40) 0.060(1.52) 0.030(0.76) 0.188(4.80) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX. 0.096(2.42) 0.078(1.98) Parameter SYMBOLS SL22A SL24A SL26A SL28A SL210A UNITS Marking Code MDD SL22A MDD SL24A MDD SL26A MDD SL28A MDD SL210A Maximum repetitive peak reverse voltage VRMM 20 40 60 80 100 V Maximum RMS voltage VRMS 14 28 42 56 70 V Maximum DC blocking voltage VDC 20 40 60 80 100 V Maximum average forward rectified current at TL(see fig.1) I(AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 50 A Maximum instantaneous forward voltage at 2.0A VF 0.45 0.50 0.70 V Maximum DC reverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 0.5 10.0 0.2 5.0 μA Maximum reverserecovery time (NOTE 1) trr 220 180 ns Typical junction capacitance (NOTE 2) CJ 15.0 pF Typical thermal resistance (NOTE 3) RJA 75.0 ℃/W Operating junction and storage temperature range TJ,TSTG -55 to +150 ℃ Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.The typical data above is for reference only.
Rev:2019A0 Page :2 Ratings And Characteristic Curves https://www.microdiode.com Reverse Voltage - 20 to 100 Volts Forward Current - 2.0 Ampere SL22A THRU SL210A The curve above is for reference only. 2.0 1.6 1.2 0.8 0.4 0 25 50 75 100 125 150 175 0.1 1.0 10 100 0.01 0.1 1 10 100 100 0.1 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE NUMBER OF CYCLES AT 60 Hz FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERESJUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES 1 10 100 8.3ms SINGLE HALF SINE-WAVE 100 1000 2000 0 20 40 60 80 100 100 0.1 0.01 0.001 TJ=75 C TJ=25 C TJ=100 C PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TRANSIENT THERMAL IMPEDANCE, C/W SL22A-SL26A SL28A-SL210A Single Phase Half Wave 60Hz Resistive or inductive Load FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,AMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25 C SL22A-SL24A SL26A-SL210A 10.0 0.1 0.01 SL22A-SL24A SL26A SL28A-SL210A TJ=25 C LEAD TEMPERATURE, C P.C.B mounted on copper pad areas
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing SMA 7" 2,000 4.0 4,000 183*155*183 178 382*356*392 160,000 16.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) SMA 11" 5,000 4.0 10,000 290*290 *38 330 310*31 0*360 80,000 11.0 Reverse Voltage - 20 to 100 Volts Forward Current - 2.0 Ampere SL22A THRU SL210A SMA 13" 7,500 4.0 15,000 335*335*38 330 350*330*360 120,000 14.5 unit: mm Item Symbol Tolerance SMA Carrier width A 0.1 2.80 Carrier length B 0.1 5.33 Carrier depth C 0.1 2.36 Sprocket hole d 0.05 1.50 13" Reel outside diameter D 2.0 330.00 13" Reel inner diameter D 1 min 50. 7" Reel outside diameter D 2.0 178.00 7" Reel inner diameter D 1 min 62. Feed hole diameter D2 0.5 13.00 Spro cket hole position E 0.1 1.75 Punch hole position F 0.1 5.50 Punch hole pitch P 0.1 4.00 Sprocket hole pitch P0 0.1 4.0 Embossment center P1 0.1 2.0 Overall tape thickness T 0.1 0.28 Tape width W 0.3 12.00 Reel width W1 1.0 18.00 Symb ol Unit (mm) Unit (inch) A 1.68 0.066 B 1.52 0.060 C 3.90 0.154 D 2.41 0.095 E 5.45 0.215