SL2136

SL2136 SECOS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

• Low Temperature Coefficient * Over-Temperature Shutdown * Very Low Dropout Voltage * High Accurate 1.5% * Short Circuit Current Fold-back * Guaranteed 600mA output * Current Limiting * Portable Electronics

Applications

• PC Peripherals * Wireless Devices * Battery Powered Widgets * Instrumentation SOT-223 A 6.70 7.30 B 13CTYP. C 2.90 3.10 J 2.30 REF. D 0.02 0.10 1 6.30 6.70 E 0C 10C 2 6.30 6.70 I 0.60 0.80 3 3.30 3.70 H 0.25 0.35 4 3.30 3.70 5 1.40 1.80 Millimeter Millimeter * Factory Pre-Set Output Voltage SL2136 * Electronic Scales * Cordless Phones

http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 2 of 4 (T)+1 to Absolute Maximum Ratings Parameter Symbol Ratings Unit Input Max Voltage VIN 8 V Output Current IOUT 1 A Output Voltage VOUT 1.3~3.8 V Supply Voltage VIN 4.5~5.5 V Operating Ambient Temperature Topr -40 ~ +85 : Junction Temperature Tj -40 ~ +125 Maximum Junction Temperature Tj Max 150 jc 15 :/W Thermal Resistance ja 160 :/W Power Dissipation(æT=100:) PD 625 mW EDS Classification B Electrical Characteristics Ta=25 unless otherwise noted Parameter Symbol Condition Min TYP Max Unit Output Voltage VOUT(E) (Note1) VIN=VOUT(T)+1V, IO=1mA -1.5% VOUT(T) (Note2) 1.5% V Output Current IO VIN=VOUT(T)+2V, VOUT V OUT(E)*0.96 600 - - mA Current Limit ILIM VO>1.2V 600 800 - mA Load Regulation REGLOAD VIN=VOUT(T)+2V, IO=1mA to 600mA - 0.2 1 % 1.3V VOUT(T) 1.4V - - 1900 1.4V<VOUT(T) 2.0V - - 1400 2.0V<VOUT(T) 2.8V - - 800 Dropout Voltage VDROPOUT IO=600mA VO=VOUT(E)-2% 2.8V<VOUT(T) - - 600 mV Quiescent Current IQ VIN= VOUT(T)+1V, IO=0mA - 30 50 A 1.3V VOUT(T) 1.4V -0.2 - 0.2 2.0V<VOUT(T)<4\`ˆØ -0.1 0.02 0.1 Line Regulation REGLINE IO=1mA VIN=VOUT(T)+1 to VOUT(T)+2 Input Voltage VIN Note3 - 7 V Over Temperature Shutdown OTS - 150 - : Over Temperature Hysterisis OTH - 30 - : Output Voltage Temperature Coefficient TC - 30 - ppm/: Short Circuit Current(Note4) ISC VIN=VOUT(T)+1V, VOUT<0.8V - 300 600 mA f=100Hz - 60 - f=1kHz - 50 - Power Supply Rejection PSRR Io=100mA Co=2.2F f=10kHz - 20 - dB Output Voltage Noise eN f=10Hz~100kHz Io=10mA, CBYP=0F Co=2.2F - 30 - Vrms SL2136 CMOS Positive Voltage Regulator Note 1: VOUT (E) =Effective Output Voltage (i.e. the output voltage when “VOUT (T) + 1.0V” is provided at the VIN pin while maintaining a certain IOUT value). 2: VOUT (T) =Specified Output Voltage 3: VIN (MIN) =VOUT+VDROPOUT 4: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied.

01-Jun-2002 Rev. A Page 3 of 4 h tp://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual Elektronische Bauelemente (T)+1 to Part Number Marking Output Voltage Part Number Marking Output Voltage 6T132 1.3VXXXX Ordering Information(contd.) SL2136-18 6T182 1.8VXXXX SL2136-15 6T152 1.5VXXXX SL2136-25 6T252 2.5VXXXX SL2136-27 6T272 2.7VXXXX SL2136-29 6T292 2.9VXXXX SL2136-28 6T282 2.8VXXXX SL2136-13 6T312 3.1VXXXX SL2136-34 6T342 3.4VXXXX SL2136-33 6T332 3.3VXXXX SL2136-35 6T352 3.5VXXXX SL2136-36 6T362 3.6VXXXX SL2136-38 6T382 3.8VXXXX SL2136-37 6T372 3.7VXXXX SL2136-31 SL2136-30 6T302 XXXX 3.0V Characteristics Curve SL2136 CMOS Positive Voltage Regulator

01-Jun-2002 Rev. A Page4 of 4 http://www.SeCoSGmbH.com/ Any changing of specification will not be informed individual SL2136 CMOS Positive Voltage Regulator