SL15-M1KTN-R PATLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

[1.General Specifications] Conforms to the CE Requirements SL15-M2JN Blinking (180 flashes per minute), Triple-flash(120 flashes per minute)Flashing Rate (Typ.) EN61000-6-4, EN61000-6-2 EN61000-3-2, EN61000-3-3EMC Directive EN61000-6-2 RoHS Directive KC and non-current carrying metallic part without breaking insulation Environmental Condition Insulation Resistance and non-current carrying metallic part and non-current carrying metallic part and non-current carrying metallic part 500V AC applied for 1min between live part SL15-M2KTN SL15-M□JN Storage Ambient Humidity SL15-M□KTN Mounting Direction Less than 90 % (No condensation) Indoor : Upright, Inverted & Sideways Max. Mounting Location -30℃ to +60℃ 240V AC 0.06A Upright Rated Power Consumption Storage Ambient Temperature Operating Voltage Range 10-30V DC 100V AC 0.14A 12V DC 24V DC 0.40A 0.20A 90-250V AC Rated Current Consumption 12-24V DC Outdoor : Upright -20℃ to +50℃ Less than 90 % (No condensation) 0.89kg SL15-M1KTN 0.86kg 0.89kg Model SPECIFICATIONS Rated Voltage 100-240V AC (50/60Hz) Product Name Flashing Beacons Drawing No. Rev. SL15-M1JN-W18 G Page Withstand Voltage EN IEC 63000 FCC Part15 SubpartB ClassA, ICES-003 ClassA Mass (Typ.) IP66/NEMA TYPE 4X,13 EN61000-6-4 FCC 4,000V AC applied for 1min between live part without breaking insulation Protection Rating KN61000-6-4, KN61000-6-2 0.86kg UL and Low Voltage Directive have been evaluated for use SL15-M1JN in indoor industrial control equipment. Due to the characteristics of the LED elements, there may be a slight variation in color tone and brightness between products. UL508, CSA-C22.2 No.14 (UL File No.E215660) Max. 5.6W4.8W More than 1MΩ at 500V DC between live part More than 3MΩ at 500V DC between live part IP23 Operating Ambient Temperature Operating Ambient Humidity Indoor/Outdoor Conforms to the UKCA Requirements Conformity Standards Low Voltage Directive IEC/EN60947-5-1,EN62471 UL Remarks

[2.Model Number Configuration] ■Rated Voltage ■Installation • Wiring ■LED Unit Color : 12-24V DC J : 3-screw Mounting･Cabtyre Cord R : Red : 100-240V AC : 2-point Hole Type Mounting･Terminal Block Y : Amber G : Green B : Blue [mm] Applicable Wire Size Solid Wire : 0.13-1.5mm2 , Stranded Wire : AWG28-14 Material ・ Specification - M N -K Terminal Block [3.Outer Dimensions]

6 Waterproof Sheet Silicone

5 Mounting Bracket

LCP GF, Drawing No. Rev. Page SL15-M1JN-W18 G R TS L 1 KT 5 1 Number Name PC UL2464, PVC, M1JN : AWG22×5, M2JN : AWG18×2+AWG24×33 Cabtyre Cord

2 Case

■SL15-M1JN/SL15-M2JN ■SL15-M1KTN/SL15-M2KTN ・Maximum Board Thickness ：10 Plain Washer(M8) Nut(M8) SUS SUS 3 pcs. 3 pcs. Accessory(Only SL15-M□JN） Screw Hole Thickness of Mounting Bracket Nominal Diameter 4.8 M8 φ150 φ150 201 200 18(18) From the cord outlet 500±303-M8 (SUS) NameplateNameplate φ7.7

[mm] ■SL15-M1JN/SL15-M2JN ■SL15-M1KTN/SL15-M2KTN [4.Mounting Dimensional Drawing] Drawing No. Rev. Page SL15-M1JN-W18 G Recommended Tightening Torque 6.0N・m Recommended Tightening Torque 6.0N・m 3/4

■SL15-M1JN ■SL15-M2JN ■SL15-M1KTN ■SL15-M2KTN ■Flash Pattern List [5.Wiring Example] Drawing No. Rev. Page SL15-M1JN-W18 G 【Ext ernal cont act capacit y of power supply line】 M1 M2 Current Capacit y (Is) 3A or more 1A or more 【Ext ernal cont act capacit y of signal line and buzzer line】 ※1 M1 M2 Current Capacit y (Is) 10mA or more 10mA or more Withst and Volt age (Vs) 20V or more 20V or more Leakage Current (IL) 0.1mA or less 0.1mA or less 【Fuse】 Fuse Rat ing 250V 1A ※1 When using NPN t ransist or open collect or. CH1 OFF/CH2 OFF CH1 ON/CH2 OFF CH1 OFF/CH2 ON CH1 ON/CH2 ON Off Continuous Blinking Triple-flash Wiring【CH1/CH2】