SL1003A090C

SL1003A090C LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• RoHS compliant
• Low insertion loss
• Surface mountable
• 5kA surge capability tested with 8/20/μs pulse as defined by IEC 61000-4-5
• GHz working frequency
• Excellent response to fast rising transients
• Can be used to meet Telcordia GR1089 without series resistance
• 10/700 6kV capability, as per ITU-Tk.21, enhanced test level
• 2000 Amp 2/10μs surge rating

Applications

• Broadband equipment
• ADSL equipment
• XDSL equipment
• Satellite and CATV equipment
• General telecom equipment AGENCY AGENCY FILE NUMBER E128662 Agency Approvals The SL1003A series has been especially developed for Broadband equipment. Special design features provide high levels of protection against fast rising transients in the 100V/μs to 1kV/μs range usually caused by lightning disturbances. These devices have ultra low capacitance 1 .5pF and present insignificant signal losses up to 1 .5GHz. These devices are extremely robust and are able to divert a 5000A pulse without destruction. For AC Power Cross of long duration, over-current protection is recommended.

3 Electrode GDT Graphical Symbol

Gas Discharge T ube (GDT) Products © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/08/14 SL1003A Series

Electrical Characteristics

Leaded Device: Tin-plated copper wire Core and Surface Mount: Dull Tin-plated Product Marking Littelfuse 'LF' Mark, voltage and date code Glow to Arc T ransition Current ~1 Amp Glow Voltage ~60 to 200 Volts Storage and Operational T emperature -40 to +90°C Notes: 1 . At delivery AQL 0.65 level II, DIN ISO 2859 2. In ionized mode, tested according to ITU-T Rec. K.12 3. Comparable to the silicon measurement Switching Voltage (Vs) Part Number Device Specifications (at 25°C) Life Ratings DC Breakdown in Volts1,2,3 (@100V/s) Impulse Breakdown in Volts2,3 (@100V/µs) Impulse Breakdown In Volts2,3 (@1kV/µs) Insulation Resistance Capaci- tance (@1MHz 0V Bias) Arc Voltage (on state Voltage) @1Amp Min Surge Life (@200A 10/1000µs) Nominal Impulse Discharge Current (8/20µs) Nominal AC Discharge Current (10x1s @50Hz) AC Discharge Current (9 Cycles @ 50Hz) DC Holdover Voltage4 Max Impulse Discharge Current (1 Application) MIN TYP MAX MAX MIN MAX TYP TYP @ 10/350µs SL1003A090 72 90 108 600 700 109Ω (at 50V) 1.5 pF ~10 to 35 V 300 shots 10 shots (@10kA) 10 A 30 A 50 V 2 kA SL1003A230 184 230 276 109Ω (at 100V) SL1003A250 200 250 300 750 135 V SL1003A260 210 260 310 SL1003A300 240 300 360 750 850 SL1003A350 280 350 420 800 900 SL1003A400 320 400 480 850 950 SL1003A450 360 450 540 900 1000 SL1003A500 400 500 600 1100 1400

Gas Discharge T ube (GDT) Products © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/08/14 SL1003A Series Device Dimensions 'SM' Type Surface Mount Devices'R' Type Radial Lead Devices (SL1003AxxxR and SL1003AxxxRF) 'R' Type Radial Lead Devices (SL1003AxxxR-001) For SL1003A series: 'C' Type Core Devices 0.8 DIA. [0.031] Ø6.0 ± 0.1 [0.236 ± 0.039] 4.4 ± 0.3 [0.173± 0.012] 4.4 ± 0.3 [0.173± 0.012] 6.0 ± 0.5 [0.236 ± 0.020] 8.1 ± 0.2 [0.236 ± 0.039] 12.2 - 0.2 [0.480 - 0.079] 4.3 + 1.5 [0.169 + 0.059] PROFILE VIEW TOP VIEW PROFILE VIEW TOP VIEW 8.1 ± 0.2 [0.236 ± 0.039] 4.3 + 1.5 [0.169 + 0.059] 0.8 DIA. [0.031] 12.2 - 2 [0.480 - 0.079] 6.0 ± 0.1 [0.236 ± 0.039] 6.0 ± 0.5 [0.236 ± 0.020] 3.9 ± 0.3 [0.154± 0.012] 3.9 ± 0.3 [0.154± 0.012] PROFILE VIEW TOP VIEW 8.1 ± 0.2 [0.236 ± 0.039] 4.3 + 1.5 [0.169 + 0.059] 0.8 DIA. [0.031] 12.2 - 2 [0.480 - 0.079] 6.0 ± 0.1 [0.236 ± 0.039] 6.0 ± 0.5 [0.236 ± 0.020] 3.9 ± 0.3 [0.154± 0.012] 3.9 ± 0.3 [0.154± 0.012] 6.7 ± 0.5 [0.263 ± 0.020]

1.2 Max

[0.047] 6.0 ± 0.1 Ø6.8 ± 0.1 Ø6.0 ± 0.1 3.20 [0.126] TOP VIEW PROFILE VIEW 8.1 ± 0.2 [0.319 ± 0.0079] 2.8 [0.110] 2.8 [0.110] TOP VIEW 2.20 [0.087] 6.000 [0.236] 7.00 [0.275] allow space for product clearance 7.60 [0.299] 6.40 [0.252] 8.80 [0.346] 1.20 [0.047] 1.20 [0.04] 0.5 [0.019] 1.5 [0.059] 2.10 [0.083] 2.10 [0.083] TOP VIEW Ø6.0 ± 0.1 [0.236 ± 0.0039] PROFILE VIEW 8.1 ± 0.2 [0.319 ± 0.0079] Dimensions are in millimeters [and inches]

Gas Discharge T ube (GDT) Products © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/08/14 SL1003A Series Reflow Condition Pb-free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 3°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of Actual Peak Temperature (t p) 10 – 30 seconds Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature (TP) 8 minutes max. Do not exceed 260°C Soldering Parameters - Reflow Soldering (Surface Mount Devices) Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Soldering Parameters - Wave Soldering (Thru-Hole Devices) Soldering Parameters - Hand Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 280° C Maximum Solder Dwell Time: 2-5 seconds Recommended Process Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max.

Gas Discharge T ube (GDT) Products © 2014 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/08/14 SL1003A Series Packaging 'SM' Type Surface Mount Items: Packaged tape and reel carrier, 700 pcs/reel (specifications below) 'C' Type Core Items: Package bulk pack in polybag, 500 pcs/bag 'R' and ‘RF’ Type Radial Lead Items: Packed in tray, 100 pcs/tray 14 [0.551] m ax 4 [0.157] 8.6 ± 0.1 [0.339 ± 0.0039] 20°m ax 3 [0.118] 7.4 ± 0.1 [0.291 ± 0.0039] 0.4 ± 0.05 [0.016 ± 0.0020] R0.3 typical [0.012] 11.5 ± 0.1 [0.453 ± 0.0039] 1.75 ± 0.1 [0.069 ± 0.0039] 24 ± 0.3 [ 0.945 ± 0.012] 10x4 ± 0.1 = 40 ± 0.2 Ø1.5 +0.1 [0.059 +0.0039] Ø1.5 +0.1 [0.059 +0.0039] Ø4 ± 0.1 [0.157 ± 0.0039] Ø2 ± 0.1 [0.079 ± 0.0039] 12 ± 0.1 [0.472 ± 0.0039] 3 [0.118] 6.1 ± 0.1 [0.240 ± 0.0039] [0.354] SMD-tape according to IEC 60286-3 Dimensions are in millimeters [and inches]Dimensions are in millimeters [and inches] Direction of Feed 17.7 [0.697] 275.0 [10.83] 100.0 [3.94] 25.0 [0.98] 76.0 [2.99] Part Numbering System and Ordering Information C = Core type (Packed in polybag, 500pcs/bag) R = Radial Lead without Failsafe (Packed in tray, 100pcs/tray) RF = Radial Lead with Failsafe (Packed in tray, 100pcs/tray) SM = Surface Mount (Packed in carrier and tape, 700pcs/reel) Voltage Type 3 Pole Arrestor Pin Configuration SL1003 A XXX XX