SL1002A090

SL1002A600SM LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• RoHS compliant/Lead- free
• Ultra low insertion loss
• Surface mountable
• 5kA surge capability tested with 8/20μS– Pulse as defined by IEC 61000-4-5
• Excellent response to fast rising transients
• Can be used to meet Telcordia GR1089 without series resistance
• 10/700 6kV capability, as per ITU-T Rec. K.21, enhanced test level
• 2000 A 2/10μs surge rating
• Meet FCC part 68 10/160μs waveform, 200A test and 10/560μs waveform 100A test
• Halogen-free

Applications

• Broadband equipment
• ADSL equipment
• XDSL equipment
• Satellite and CATV equipment
• General telecom equipment AGENCY AGENCY FILE NUMBER ® E128662 Agency Approvals ®SL1002A Series

2 Electrode GDT Graphical Symbol

Revised: November 10, 2009 The Broadband Optimized™ SL1002A series has been especially developed for use in broadband equipment. Special design features provide high levels of protection against fast rising transients in the 100V/μs to 1kV/μs range usually caused by lightning disturbances. These devices have ultra low capacitance (typically 1 .2pF or less) and present insignificant signal losses up to 1 .5GHz. These devices are extremely robust and are able to divert a 5000A pulse without destruction. For AC Power Cross of long duration, overcurrent protection is recommended.

©2009 Littelfuse, Inc. Gas Discharge T ube (GDT) Products Revised: November 10, 2009 Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Customer should verify actual device performance in their specific applications. SL1002A Series SL1002A Series

Electrical Characteristics

Device Specifications (at 25°C) Life Ratings DC Breakdown in Volts1,2 (@100V/s) Impulse Breakdown in Volts3,4 (@100V/μs) Impulse Breakdown in Volts3,4 (@1kV/μs) Insulation Resistance Capaci- tance (@1MHz 0V Bias) Arc Voltage (on state voltage) @1Amp Min Surge Life (@100A 10/1000μs) Nominal Impulse Discharge Current (8/20μs) Nominal AC Discharge Current (10x1s @50-60Hz) DC Holdover Voltage5 Max Impulse Discharge Current (1 Application) MIN TYP MAX MAX MIN MAX TYP TYP @ 2/10 μs @ 10/350 μs SL1002A075 60 75 90 400 650 109 Ω (at 50V) 1.2 pF ~15 V 300 shots6 10 shots7 (@ 5kA) 5 A 50 V 2 kA 1 .5 kA SL1002A090 72 90 108 SL1002A230 184 230 276 600 700 109 Ω (at 100V) 135 V SL1002A250 200 250 300 SL1002A260 210 260 310 SL1002A350 280 350 420 800 900 SL1002A470 376 470 564 900 1000 SL1002A600 480 600 720 1100 1200 SL1002A600SP 570 600 780 1200 1300 109 Ω (at 500V) Product Characteristics Voltage vs. Time Characteristics Materials Construction = Ceramic Insulator Device Finish = Dull Tin-plated 17 .5 +/-12.5 microns Product Marking Littelfuse 'LF' Mark, voltage and date code Glow to Arc T ransition Current < 0.5 Amps Glow Voltage ~60 - 140 Volts Storage and Operational T emperature -40 to +90°C Notes: 1 . At delivery AQL 0.65 level II, DIN ISO 2859 2. In ionized mode 3. In ionized mode, tested according to ITU-T Rec. K.12 4. Comparable to the silicon measurement Switching Voltage (Vs) 6. 300 Applications [150(+) & 150(-)] 7 . 10x[5x (+) & 5x (-)] Applications Time (ns) 0 200 400 600 800 1000 1200 Max dynamic breakover voltage Hold-over voltage On-State voltage Voltage (V)

©2009 Littelfuse, Inc. Gas Discharge T ube (GDT) Products Revised: November 10, 2009Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Customer should verify actual device performance in their specific applications. SL1002A Series SL1002A Series Device Dimensions Insertion Loss Characteristics 4.1 ± 0.2 [0.161 ± 0.0079] 3.6 ± 0.2 [0.142 ± 0.0079] 6.2 ± 0.15 7.5 ± 0.2 Ø6.2 ± 0.1 0.50

3.9 Ref

[0.154 Ref] 5.00 [0.197] 1.30 [0.051] 3.50 [0.138] TOP VIEW PROFILE VIEW SEMI–PROFILE VIEW SOLDER PAD LAYOUT 'SM' Type Surface Mount Devices Typical Insertion Loss Characteristics (600V) 'C' Type Core Devices Typical Insertion Loss Characteristics (90V) 4.1 ± 0.2 [0.161 ± 0.0079] 3.6 ± 0.2 [0.142 ± 0.0079] Ø6.0 ± 0.15 [0.236 ± 0.0059] Ø6.0 ± 0. 0.50 TOP VIEW PROFILE VIEW SEMI–PROFILE VIEW -18 -16 -14 -12 -10 S21 [dB] Frequency [Hz] S21 [dB] Frequency [Hz] -16 -14 -12 -10 Dimensions are in millimeters [and inches] Dimensions are in millimeters [and inches]

©2009 Littelfuse, Inc. Gas Discharge T ube (GDT) Products Revised: November 10, 2009 Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Customer should verify actual device performance in their specific applications. SL1002A Series SL1002A Series Reflow Condition Pb-free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) 3°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of Actual Peak Temperature (tp) 10 – 30 seconds Ramp-down Rate 6°C/second max. Time 25°C to Peak Temperature (TP) 8 minutes max. Do not exceed 260°C Soldering Parameters - Reflow Soldering (Surface Mount Devices) Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Soldering Parameters - Wave Soldering (Thru-Hole Devices) Soldering Parameters - Hand Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 280° C Maximum Solder Dwell Time: 2-5 seconds Recommended Process Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max.

©2009 Littelfuse, Inc. Gas Discharge T ube (GDT) Products Revised: November 10, 2009Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Customer should verify actual device performance in their specific applications. SL1002A Series SL1002A Series Packaging ‘C’ Type Core Items: Package bulk pack in polybag, 1000 pcs/bag 7.5 ± 0.1 [0.295 ± 0.004] 1.75 ± 0.1 [0.069 ± 0.004] 8 ± 0.1 [0.315 ± 0.004] 1.50 [0.059] 4 ± 0.1 [0.157 ± 0.004] 2 ± 0.1 [0.079 ± 0.004] 16 ± 0.3 [0.630 ± 0.012] 1.50 +0.10 [0.059]+0.004 10x4=40 ± 0.2 6.5 ± 0.1 [0.256 ± 0.004] 6.5 ± 0.1 [0.256 ± 0.004] 0.40 [0.016] R0.30 max. [0.012] Direction of Feed 17.7 [0.697] 275.0 [10.83] 100.0 [3.94] 25.0 [0.98] 76.0 [2.99] Dimensions are in millimeters [and inches]Dimensions are in millimeters [and inches] Part Numbering System and Ordering Information C = Core (Packed in polybag, 1000pcs/bag) SM = Surface Mount (Packed in carrier and tape, 1000pcs/reel) Voltage Surge Capability Pin Configuration SL1002 A XXX X X 'SM' Type Surface Mount Items: Packaged tape and reel carrier, 1000 pcs/reel (specifications below)