SL10-M1KTB-R PATLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

[1.General Specifications] 0.09A 0.08A KC FCC RoHS Directive Less than 90 % (No condensation) Outdoor : Upright Indoor/Outdoor Upright Mass (Typ.) SL10-M2JN 240V AC 0.04A -20℃ to +50℃ 2.9W 0.05A 12V DC 0.14A 100V AC24V DC 3.1W and non-current carrying metallic part and non-current carrying metallic part without breaking insulation SL10-M1KTN 0.37kg 0.36kg SL10-M1JN 3.4W 0.38kg 0.37kg SL10-M2KTB Indoor : Upright, Inverted & Sideways 0.40kg UL508, CSA-C22.2 No.14 (UL File No.E215660)UL SL10-M1KTB Environmental Condition Environmental Condition More than 1MΩ at 500V DC between live part Insulation Resistance Withstand Voltage without breaking insulation SL10-M2□□□-□ 12-24V DC 100-240V AC (50/60Hz) 10-30V DC 90-250V AC 4,000V AC applied for 1min between live part and non-current carrying metallic part -30℃ to +60℃ Mounting Direction Less than 90 % (No condensation) 0.12A Storage Ambient Humidity Mounting Location 2.9W No Buzzer With Buzzer 0.22A 3.5W 2.6W Operating Voltage Range Operating Ambient Temperature Operating Ambient Humidity Rated Current Consumption Max. 0.24A No Buzzer With Buzzer Rated Power Consumption Max. Flashing Beacons Model SPECIFICATIONS Rated Voltage SL10-M1□□□-□ Product Name Drawing No. Rev. SL10-M1JN-W18 G Page EMC Directive EN61000-6-4, EN61000-6-2 EN61000-6-2 EN61000-3-2, EN61000-3-3 FCC Part15 SubpartB ClassA, ICES-003 ClassA EN61000-6-4 Conforms to the CE Requirements Conforms to the UKCA Requirements Due to the characteristics of the LED elements, there may be a slight variation in color tone and brightness between products. Remarks Conformity Standards Low Voltage Directive UL and Low Voltage Directive have been evaluated for use KN61000-6-4, KN61000-6-2 EN IEC 63000 Sound Pressure Level (Typ.) More than 3MΩ at 500V DC between live part and non-current carrying metallic part Protection Rating Storage Ambient Temperature in indoor industrial control equipment. Flashing Rate (Typ.) Measured at 1m from the front of the Buzzer Opening 88dB IEC/EN60947-5-1,EN62471 SL10-M□JN IP23 IP65(when used with SZW-103 Rubber Gasket attachment) SL10-M□KT□ IP66/NEMA TYPE 4X,13 Blinking (180 flashes per minute), Triple-flash(120 flashes per minute) 0.40kg SL10-M2KTN 500V AC applied for 1min between live part

[2.Model Number Configuration] ■Rated Voltage ■Installation・Wiring・Buzzer ■LED Unit Color ： 12-24V DC ： 3-screw Mounting・Cabtyre Cord・No Buzzer R ： Red ： 100-240V AC ： 2-point Hole Type Mounting・Terminal Block・No Buzzer Y ： Amber ： 2-point Hole Type Mounting・Terminal Block・With Buzzer G ： Green B ： Blue [mm] JN KTN KTB Drawing No. Rev. Page SL10-M1JN-W18 G B - RS L - M1 0 [3.Outer Dimensions]

1 K T

■SL10-M1JN/SL10-M2JN ・Maximum Board Thickness ：8 Plain Washer(M5) Nut(M5) SUS SUS 3 pcs. 3 pcs. Accessory(Only SL10-M□JN） Nameplate From the cord outlet 500±30 φ100 141 18(13) φ7.7 3-M5 (SUS)

[3.Outer Dimensions] [mm]

2 Case PC

3 Cabtyre Cord UL2464, PVC, M1JN : AWG22×5, M2JN : AWG18×2+AWG24×3

Drawing No. Rev. PC Page SL10-M1JN-W18 G Number Name Material ・ Specification

1 Globe

4 Terminal Block

LCP GF, Applicable Wire Size Solid Wire : 0.13-1.5mm2 , Stranded Wire : AWG28-14

5 Mounting Bracket PC

6 Waterproof Sheet Silicone

■SL10-M1KTN/SL10-M2KTN ■SL10-M1KTB/SL10-M2KTB 5.7 M5 Screw Hole Thickness of Mounting Bracket Nominal Diameter Buzzer Opening (Models with Buzzer Only) Nameplate Nameplate φ100 φ100 140 146

[mm] ■SL10-M1JN/SL10-M2JN ■SL10-M1KT□/SL10-M2KT□ [4.Mounting Dimensional Drawing] Drawing No. Rev. Page SL10-M1JN-W18 G Recommended Tightening Torque 1.4N・m Recommended Tightening Torque 1.4N・m 4/5

■SL10-M1JN ■SL10-M2JN ■SL10-M1KT□ ■SL10-M2KT□ ※For No Buzzer Models, do not require wiring. ■Flash Pattern List [5.Wiring Example] Drawing No. Rev. Page SL10-M1JN-W18 G 【Ext ernal cont act capacit y of power supply line】 M1 M2 Current Capacit y (Is) 3A or more 1A or more 【Ext ernal cont act capacit y of signal line and buzzer line】 ※1 M1 M2 Current Capacit y (Is) 10mA or more 10mA or more Withst and Volt age (Vs) 20V or more 20V or more Leakage Current (IL) 0.1mA or less 0.1mA or less 【Fuse】 Fuse Rat ing 250V 1A ※1 When using NPN t ransist or open collect or. CH1 OFF/CH2 OFF CH1 ON/CH2 OFF CH1 OFF/CH2 ON CH1 ON/CH2 ON Off Continuous Blinking Triple-flash Wiring【CH1/CH2】