SL08-M1KTB-R PATLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

[1.General Specifications] Conforms to the CE Requirements Conforms to the UKCA Requirements IP65(when used with SZW-102 Rubber Gasket attachment) SL08-M□KT□ IP66/NEMA TYPE 4X,13 Remarks Insulation Resistance KN61000-6-4, KN61000-6-2 FCC Part15 SubpartB ClassA, ICES-003 ClassA Flashing Rate (Typ.) More than 3MΩ at 500V DC between live part and non-current carrying metallic part Operating Voltage Range Storage Ambient Temperature Operating Ambient Temperature Storage Ambient Humidity Mounting Direction Protection Rating Environmental Condition in indoor industrial control equipment. -20℃ to +50℃ Mounting Location Less than 90 % (No condensation) Less than 90 % (No condensation) -30℃ to +60℃ 0.22A 0.12A 3.4W 3.5W Rated Power Consumption Drawing No. Rev. SL08-M1JN-W18 G Page Rated Voltage 0.05A 100-240V AC (50/60Hz) SPECIFICATIONS 240V AC SL08-M1□□□-□ 24V DC SL08-M2□□□-□ Flashing Beacons 10-30V DC 90-250V AC Operating Ambient Humidity Product Name Model 12-24V DC 100V AC 2.9W 0.09A FCC RoHS Directive and non-current carrying metallic part SL08-M2JN 2.6W 0.08A 0.04A 0.24A 0.14A 3.1W Measured at 1m from the front of the Buzzer OpeningEnvironmental Condition UL508, CSA-C22.2 No.14 (UL File No.E215660) Due to the characteristics of the LED elements, there may be a slight variation in color tone and brightness between products. EN IEC 63000 EN61000-6-2 No Buzzer With Buzzer Mass (Typ.) SL08-M1JN No Buzzer With Buzzer without breaking insulation SL08-M1KTB 0.24kg IP23 KC Withstand Voltage 500V AC applied for 1min between live part 4,000V AC applied for 1min between live part and non-current carrying metallic part SL08-M2KTB and non-current carrying metallic part 0.26kg Sound Pressure Level (Typ.) 0.25kg Rated Current Consumption EN61000-3-2, EN61000-3-3 Max. 0.28kg SL08-M1KTN 0.23kg More than 1MΩ at 500V DC between live part SL08-M2KTN Indoor : Upright, Inverted & Sideways Max. 12V DC Indoor/Outdoor without breaking insulation 2.9W Blinking (180 flashes per minute), Triple-flash(120 flashes per minute) Upright SL08-M□JN Outdoor : Upright 0.27kg 86dB Low Voltage Directive IEC/EN60947-5-1,EN62471 Conformity Standards UL EMC Directive EN61000-6-4 EN61000-6-4, EN61000-6-2 UL and Low Voltage Directive have been evaluated for use

■Rated Voltage ■Installation・Wiring・Buzzer ■LED Unit Color ： 12-24V DC ： 3-screw Mounting・Cabtyre Cord・No Buzzer R ： Red ： 100-240V AC ： 2-point Hole Type Mounting・Terminal Block・No Buzzer Y ： Amber ： 2-point Hole Type Mounting・Terminal Block・With Buzzer G ： Green B ： Blue [mm] JN KTN KTB Drawing No. Rev. K0 8 - T1M Page SL08-M1JN-W18 G R-B [2.Model Number Configuration] LS [3.Outer Dimensions] ・Maximum Board Thickness ：9 Plain Washer(M4) Nut(M4) SUS SUS 3 pcs. 3 pcs. Accessory(Only SL08-M□JN） ■SL08-M1JN/SL08-M2JN Nameplate From the cord outlet 500±30 3-M4 (SUS) φ80 121 16(13) φ7.7

[mm] Drawing No. Rev. Page SL08-M1JN-W18 G [3.Outer Dimensions] Material ・ SpecificationNumber Name

1 Globe

3 Cabtyre Cord

2 Case PC

4 Terminal Block

LCP GF, Applicable Wire Size Solid Wire : 0.13-1.5mm2 , UL2464, PVC, M1JN : AWG22×5, M2JN : AWG18×2+AWG24×3 Stranded Wire : AWG28-14

5 Mounting Bracket PC

6 Waterproof Sheet Silicone

■SL08-M1KTN/SL08-M2KTN ■SL08-M1KTB/SL08-M2KTB 4.4 M4 Nominal Diameter Screw Hole Thickness of Mounting Bracket Buzzer Opening (Models with Buzzer Only) Nameplate Nameplate φ80 120 φ80 126

[mm] ■SL08-M1JN/SL08-M2JN ■SL08-M1KT□/SL08-M2KT□ Page SL08-M1JN-W18 G [4.Mounting Dimensional Drawing] Drawing No. Rev. Recommended Tightening Torque 0.7N・m Recommended Tightening Torque 0.7N・m

■SL08-M1JN ■SL08-M2JN ■SL08-M1KT□ ■SL08-M2KT□ ※For No Buzzer Models, do not require wiring. ■Flash Pattern List [5.Wiring Example] Drawing No. Rev. Page SL08-M1JN-W18 G 【Ext ernal cont act capacit y of power supply line】 M1 M2 Current Capacit y (Is) 3A or more 1A or more 【Ext ernal cont act capacit y of signal line and buzzer line】 ※1 M1 M2 Current Capacit y (Is) 10mA or more 10mA or more Withst and Volt age (Vs) 20V or more 20V or more Leakage Current (IL) 0.1mA or less 0.1mA or less 【Fuse】 Fuse Rat ing 250V 1A ※1 When using NPN t ransist or open collect or. CH1 OFF/CH2 OFF CH1 ON/CH2 OFF CH1 OFF/CH2 ON CH1 ON/CH2 ON Off Continuous Blinking Triple-flash Wiring【CH1/CH2】