SKYFR-001387 SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
- Wireless infrastructure
- Power amplifiers F/uni0065a/uni0074/uni0075r/uni0065/uni0073
- Small surface mount package
- /uni004Fpera/g415ng fre/uni0071uenc/uni0079 range/uni003A /uni0031/uni0038/uni0030/uni0035 to /uni0031/uni0038/uni0038/uni0030 /uni004D/uni0048/uni007A
- Be/uni004F free
- Ro/uni0048S compliant
- Tape & Reel 1 2 CW
Figure 1. Block Diagram Table 1. Absolute Maximum Ratings Note: Exceeding any of the limits listed here may result in permanent damage to the device or may reduce dev ice reliability.
Table 2. Electrical Specifications (Note 1) Table 3. Plating Specification Note 1: Performance is guaranteed under the conditions list ed in this table and over the operating temperature range. Note 2: See Skyworks Application Note, Intermodulation Distortion Measurements of Ferrites , document number 201537 for further details. Note 3: Part tested on PCB-00077, 0.508mm Rogers RO4350B, t race width 1.07mm wide, 1oz copper. Table 4. Ordering Information
Copyright © 2011 Skyworks Solutions, Inc. All Right s Reserved. whatsoever for conflicts, incompatibilities, or oth er difficulties arising from any future changes. including the sale, distribution, reproduction or u se of any Skyworks products, information or materia ls, except as may be provided in Skyworks Terms and Conditions of Sale. PRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE A CCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, G RAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATER IALS. OF THE POSSIBILITY OF SUCH DAMAGE. damage to any equipment resulting from the use of S kyworks products outside of stated published specif ications or parameters. identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com and incorporated by reference. All dimensions in millimeters. Tolerance: ±0.2mm unless otherwise specified. Coplanarity specification: 0.1mm maximum. Model number, lot code and port designation printed on top side of device. Figure 2. Package Dimensions and Recommended PCB La yout