SKY65105 SKYWORKS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Figure 2. SKY65105 Pinout– 12-Pin MCM Package Table 1. SKY65105 Signal Descriptions

1 GND Ground 7 GND Ground

2 RFIN RF input 8 RFOUT RF output

3 VREF Reference voltage 9 GND Ground

4 VCC2 Supply voltage 10 GND Ground

5 GND Ground 11 GND Ground

6 GND Ground 12 VCC1 Supply voltage

optimum temperature tracking performance. Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Table 4. SKY65105 are illustrated in Figures 3 through 10.

Table 2. SKY65105 Absolute Maximum Ratings parameters set at or below their nominal values. Table 3. SKY65105 Recommended Operating Conditions Table 4. SKY65105 Electrical Characteristics Note: The above specifications apply only to the 1900 MHz operating frequency.

Figure 13. Evaluation Board Layer Detail

0.05 A B C

0.05 ABC

Figure 15. SKY65105 12-Pin MCM Package Dimensions

  1. Carrier tape: black conductive poly carbonate or polystyrene.
  2. Cover tape material: transparent conductive PSA.
  3. Cover tape size: 13.3 mm width.
  4. All measurements are in millimeters.

Figure 16. SKY65105 12-Pin MCM Tape and Reel Dimensions

PRELIMINARY DATA SHEET • SKY65105 POWER AMPLIFIER Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200085D • Skyworks Proprietary and Confiden tial information • Products and Product Information are Subject to Change Without Notice • July 13, 2007 11

Ordering Information

Model Name Manufacturing Part Numb er Evaluation Kit Part Number SKY65105 1700-2200 MHz Linear Power Amplifier SKY65105-21 TW10-D840 Copyright © 2006, 2007 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.