SKY65004 SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
of the SKY65004 are provided in Table 4. subjected to high temperature during solder assembly. exceeds 300 °C for more than 10 seconds. profiles can also be found in the JEDEC Standard J-STD-020. Table 1. SKY65004 Signal Descriptions
1 RF_IN RF input
2 GND Ground
3 RF_OUT RF output
Table 2. SKY65004 Absolute Maximum Ratings parameters set at or below their nominal values.
Table 3. SKY65004 Recommended Operating Conditions Table 4. SKY65004 Electrical Characteristics (1 of 2)
5 MHz offset
64 DPCH
and the layer detail is provided in Figure 15. must be followed regardless of final use or configuration.
- Paths to ground should be made as short as possible.
- The ground pad of the SKY65004 power amplifier has special
reduces the lifetime of the device. Table 5. Component values for the SKY65004-21 package option
- Connect a 5.0 V supply to VCC. If available, enable the current
limiting function of the power supply to 240 mA.
- Connect a signal generator to the RF signal input port. Set it to
to the Evaluation Board but do NOT enable the RF signal.
- Connect a spectrum analyzer to the RF signal output port.
Figure 14. Evaluation Board Assembly Drawing
Figure 15. Evaluation Board Layer Detail
Figure 16. SKY65004 Evaluation Board Schematic Table 5. SKY65004-11 (SOT-89 Package) Evaluation Board Component Values vs Frequency
Table 6. SKY65004-21 (MCM Package) Evaluation Board Component Values vs Frequency
DATA SHEET • SKY65004 LINEAR PA DRIVER Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 14 September 25, 2006 • Skyworks Proprietary and Confidential in formation • Products and Product Information are Subject to Change Without Notice • 103155F
Ordering Information
Model Name Ordering Part Number Evaluation Kit Part Number SKY65004 250-2700 MHz Linear PA Driver (4-pin SOT-89 package) SKY65004-11 TW11-D631 (900 MHz) TW11-D632 (1960 MHz) TW11-D633 (2140 MHz) TW11-D634 (450 MHz) TW11-D636 (2450 MHz, VCC = 5 V) TW11-D638 (2450 MHz, VCC = 3.3 V) TW11-D637 (2600 MHz) SKY65004 250-2700 MHz Linear PA Driver (3-pin MCM package) SKY65004-21 (Pb-free package) TW13-D391-011 (450 MHz) TW13-D391-021 (900 MHz) TW13-D391-031 (1960 MHz) TW13-D391-041 (2140 MHz) TW13-D391-061 (2450 MHz, VCC = 3.3 V) TW13-D391-071 (2450 MHz, VCC = 5 V) TW13-D391-081 (2600 MHz) Copyright © 2003, 2004, 2005, 2006 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.