SKY13445-368LF SKYWORKS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Table 1. SKY13445-368LF Signal Descriptions (Note 1) blocked for proper operation. blocked for proper operation.
9 VC3 Control line 3 for ANT2 to RX2 path
blocked for proper operation. blocked for proper operation.
5 VC2 Control line 2 for ANT2 to TX2 path 11 VC1 Control line 1 for ANT2 to BT path
blocked for proper operation. blocked for proper operation. Note 1: Bottom ground paddle must be connected to ground. Table 2. SKY13445-368LF Absolute Maximum Ratings (Note 1)
2.5 GHz, SP3T switch
5.0 GHz, SP2T switch
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. illustrated in Figures 3 to 10.
Table 3. SKY13445-368LF Electrical Specifications (Note 1)
2 GHz SP3T
64 QAM
5 GHz SP2T
54 Mbps, 64 QAM
Note 1: Performance is guaranteed only under the conditions listed in this table.
Table 4. SKY13445-368LF Electrical Specifications (Note 1) Note 1: Performance is guaranteed only under the conditions listed in this table. Table 5. SKY13445-368LF Truth Table (Note 1) Note 1: Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device.
Figure 14. Typical Part Markings
0.10 M C A B
0.10 M C
Detail BAll measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the terminals and all other bottom surface metalization. Plating requirement per source control drawing (SCD) 2504. Figure 15. SKY13445-368LF 12-Pin QFN Package Dimensions
- Carrier tape must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping.
- Carrier tape shall be black conductive polycarbonate bakeable material at 125 ˚C temperature.
- Cover tape shall be transparent conductive with 5.40 mm width.
- ESD-surface resistivity must meet all ESD requirements of Skyworks specified on GP01-D232.
- All measurements are in millimeters.
Figure 16. SKY13445-368LF Tape and Reel Dimensions
DATA SHEET • SKY13445-368LF: DUAL-BAND, SPDT AND SP3T WLAN SWITCH Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 October 30, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202794C
Ordering Information
Model Name Manufacturing Part Number Evaluation Board Part Number SKY13445-368LF Dual-Band SP2T and SP3T Switch SKY13445-368LF SKY13445-368LF-EVB Copyright © 2013-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.