SKM75GB07E3 SEMIKRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
© by SEMIKRON Rev. 1.0 15.02.2023 1 Absolute Maximum Ratings Symbol Conditions Values Unit IGBT VCES Tj = 25 °C 650 V IC Tj = 175 °C Tc = 25 °C 99 A Tc = 80 °C 74 A ICnom 75 A ICRM 225 A VGES -20 ... 20 V tpsc VCC = 360 V VGE ≤ 15 V VCES ≤ 650 V Tj = 150 °C 6 μs Tj -40 ... 175 °C Inverse diode VRRM Tj = 25 °C 650 V IF Tj = 175 °C Tc = 25 °C 84 A Tc = 80 °C 62 A IFRM 100 A IFSM tp = 10 ms, sin 180°,Tj = 25 °C 550 A Tj -40 ... 175 °C Module It(RMS) 200 A Tstg module without TIM -40 ... 125 °C Visol AC sinus 50 Hz, t = 1 min 4000 V Characteristics Symbol Conditions min. typ. max. Unit IGBT VCE(sat) IC = 75 A VGE = 15 V chiplevel Tj = 25 °C 1.45 1.77 V Tj = 150 °C 1.72 2.10 V VCE0 chiplevel Tj = 25 °C 0.90 1.00 V Tj = 150 °C 0.82 0.90 V rCE VGE = 15 V chiplevel Tj = 25 °C 7.3 10 mΩ Tj = 150 °C 12 16 mΩ VGE(th) VGE = VCE, IC = 1.2 mA 5.1 5.8 6.4 V ICES VGE = 0 V, VCE = 650 V, Tj = 25 °C 0.3 mA Cies VCE = 25 V VGE = 0 V f = 1 MHz 4.6 nF Coes f = 1 MHz 0.30 nF Cres f = 1 MHz 0.14 nF QG VGE = - 8V ... + 15 V 680 nC RGint Tj = 25 °C 4.0 Ω td(on) VCC= 300 V IC= 75 A VGE =+15/-15V RGon= 1 Ω RGoff= 1 Ω di/dton= 2500 A/µs di/dtoff= 1250 A/µs dv/dt = 4030 V/µs Tj = 150 °C 72 ns tr Tj = 150 °C 30 ns Eon Tj = 150 °C 2.4 mJ td(off) Tj = 150 °C 250 ns tf Tj = 150 °C 50 ns Eoff Tj = 150 °C 2.7 mJ Rth(j-c) per IGBT 0.591 K/W Rth(c-s) per IGBT, P12 (reference) 0.090 K/W Rth(c-s) per IGBT, HP-PCM 0.050 K/W Trench IGBT Modules SKM75GB07E3 Features* VCE(sat) with positive temperature coefficient High short circuit capability, self limiting to 6 x ICnom Fast & soft switching inverse CAL diodes Insulated copper baseplate using DCB Technology (Direct Copper Bonding) With integrated gate resistor Typical Applications AC inverter drives UPS Electronic welders Wind power Public transport Remarks Case temperature limited to Tc = 125°C max. Recommended Top = -40 ... +150°C Product reliability results valid for Tj = 150°C Use of soft RG necessary GB SEMITRANS® 2
© by SEMIKRON Rev. 1.0 15.02.2023 2 Characteristics Symbol Conditions min. typ. max. Unit Inverse diode VF = VEC IF = 75 A VGE = 0 V chiplevel Tj = 25 °C 1.37 1.73 V Tj = 150 °C 1.35 1.72 V VF0 chiplevel Tj = 25 °C 1.04 1.24 V Tj = 150 °C 0.85 0.99 V rF chiplevel Tj = 25 °C 6.7 9.8 mΩ Tj = 150 °C 10 15 mΩ IRRM VCC = 300 V IF = 75 A VGE = -15 V di/dtoff = 2740 A/µs Tj = 150 °C 87 A Qrr Tj = 150 °C 7.8 µC Err Tj = 150 °C 1.6 mJ Rth(j-c) per diode 0.85 K/W Rth(c-s) per diode, P12 (reference) 0.108 K/W Rth(c-s) per diode, HP-PCM 0.059 K/W Module LCE 30 nH RCC'+EE' measured per switch Tj = 25 °C 0.65 mΩ Tj = 150 °C 1.09 mΩ Rth(c-s)1 calculated without thermal coupling, P12 (reference) 0.025 K/W Rth(c-s)2 including thermal coupling, Ts underneath module, P12 (reference) 0.040 K/W Rth(c-s)2 including thermal coupling, Ts underneath module, HP-PCM 0.022 K/W Ms to heat sink M6 3 5 Nm Mt to terminal M5 2.5 5 Nm - Nm w 160 g SEMITRANS® 2 Trench IGBT Modules SKM75GB07E3 Features* VCE(sat) with positive temperature coefficient High short circuit capability, self limiting to 6 x ICnom Fast & soft switching inverse CAL diodes Insulated copper baseplate using DCB Technology (Direct Copper Bonding) With integrated gate resistor Typical Applications AC inverter drives UPS Electronic welders Wind power Public transport Remarks Case temperature limited to Tc = 125°C max. Recommended Top = -40 ... +150°C Product reliability results valid for Tj = 150°C Use of soft RG necessary GB
© by SEMIKRON Rev. 1.0 15.02.2023 3 Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic
© by SEMIKRON Rev. 1.0 15.02.2023 4 Fig. 11: CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode peak reverse recovery charge
© by SEMIKRON Rev. 1.0 15.02.2023 5 This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, chapter IX. *IMPORTANT INFORMATION AND WARNINGS The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non- infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes. Pinout and Dimensions GB