SKKD101 SEMIKRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
© by Semikron Danfoss Rev. 4.0 23.04.2024 1 SEMIPACK® 1 SKKD Rectifier Diode Modules SKKD 101/16 Features* Heat transfer through aluminium oxide ceramic insulated metal baseplate UL recognized, file no. E63532 Typical Applications Non-controllable rectifiers for AC/AC converters Line rectifiers for transistorized AC motor controllers Field supply for DC motors Absolute Maximum Ratings Symbol Conditions Values Unit Recitifier Diode IFAV sin. 180° Tj max = 130 °C Tc = 85 °C 143 A Tc = 100 °C 108 A IFSM 10 ms Tj = 25 °C 2600 A Tj = 130 °C 2210 A i2t 10 ms Tj = 25 °C 33800 A²s Tj = 130 °C 24421 A²s VRSM Tj = 25 °C 1700 V VRRM Tj = 25 °C 1600 V Tj -40 ... 130 °C Module Tstg -40 ... 125 °C Visol 1 s 3600 V Characteristics Symbol Conditions min. typ. max. Unit Diode VF Tj = 25 °C, I F = 420 A 1.50 1.65 V VF0 Tj = 130 °C 0.77 0.85 V rF Tj = 130 °C 1.85 2.05 m Ω IR Tj = 130 °C, VRRM 3 mA Rth(j-c) cont. per chip 0.15 K/W per module 0.075 K/W Rth(j-c) sin. 180° per chip 0.2 K/W per module 0.1 K/W Module Rth(c-s) chip 0.09 K/W module 0.05 K/W Ms to heatsink M5 4.25 5.75 Nm Mt to terminals M5 2.55 3.45 Nm a 5 * 9.81 m/s² w 75 g
2 Rev. 4.0 23.04.2024 © by Semikron Danfoss Fig. 11L: Power dissipation per diode vs. forward current Fig. 11R: Power dissipation per diode vs. ambient temperature Fig. 12L: Power dissipation of two modules vs. direct current Fig. 12R: Power dissipation of two modules vs. case temperature Fig. 13L: Power dissipation of three modules vs. direct current Fig. 13R: Power dissipation of three modules vs. case temperature 100 150 200 250 0 50 100 150 200 SKKD101.xls 11L rec. 60° rec. 120° sin. 180° rec. 180° cont. ½ SKKD 101 PFAV W IFAV A 100 150 200 250 0 50 100 150 SKKD101.xls-11R 1.2 0.6 Ta 0.4 0.7 PFAV 1.5 0.8 W Rth(j-a) K/W 0.5 0.35 100 200 300 400 500 600 700 800 0 100 200 300 SKKD101.xls 12L R L 2 SKKD 101 PVtot W ID A 100 200 300 400 500 600 700 800 0 50 100 150 SKKD101.xls 12R Ta 0.15 0.2 0.12 0.25 0.6 0.3 0.1 PVtot W 0.4 0.8 0.08 0.06 K/W Rth(c-a) 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250 300 SKKD101.xls 13L 3 SKKD 101 PVtot W ID A 100 200 300 400 500 600 700 800 900 0 50 100 150 SKKD101.xls 13R Ta 0.12 0.3 0.1 0.25 PVtot W 0.5 0.7 0.4 0.2 0.15 0.08 K/W Rth(c-a)
© by Semikron Danfoss Rev. 4.0 23.04.2024 3 Fig. 14: Transient thermal impedance vs. time Fig. 15: Forward characteristics Fig. 16: Surge overload current vs. time 0.1 0.2 0.3 0.001 0.01 0.1 1 10 100 SKKD101.XLS-14 s Zth K/W t Zth(j-s) Zth(j-c) ½ SKKD 101 100 150 200 250 300 0 0.5 1 1.5 SKKD101.XLS-15 VF V IF A typ. ½ SKKD 101 __ Tj = 25°C - -T j = 130°C 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 1 10 100 1000 SKKD101.XLS-16 mst ½ SKKD 101 0VRRM 0.5VRRM 1VRRM IF(OV) IFSM IFSM(25°C) = 2650 A IFSM(130°C) = 2210 A
4 Rev. 4.0 23.04.2024 © by Semikron Danfoss IMPORTANT INFORMATION AND WARNINGS This is an electrostatic discharge sensitive device (ESDS) according to international standard IEC 61340. *The specifications of Semikron Danfoss products may not be considered as any guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of Semikron Danfoss products describe only the usual characteristics of Semikron Danfoss products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Resulting from this, application adjustments of any kind may be necessary. Any user of Semikron Danfoss products is responsible for the safety of their applications embedding Semikron Danfoss products and must take adequate safety measures to prevent the applications from causing any physical injury, fire or other problem, also if any Semikron Danfoss product becomes faulty. Any user is responsible for making sure that the application design and realization are compliant with all laws, regulations, norms and standards applicable to the scope of application. Unless otherwise explicitly approved by Semikron Danfoss in a written document signed by authorized representatives of Semikron Danfoss, Semikron Danfoss products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Semikron Danfoss does not convey any license under its or a third partys patent rights, copyrights, trade secrets or other intellectual property rights, neither does it make any representation or warranty of non-infringement of intellectual property rights of any third party which may arise from a users applications. SKKD SEMIPACK 1