SKH-M1JB-R PATLITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

[1.General Specifications] SKH-M1J 0.36kgSKH-M2J0.33kg More than 3MΩ at 500V DC between live part and non-current carrying metallic part and non-current carrying metallic part Insulation Resistance -10℃ to +50℃ Storage Ambient Temperature Storage Ambient Humidity Indoor : Upright, Inverted & Sideways Protection Rating Upright IEC/EN60947-5-1,EN62471 in indoor industrial control equipment. UL508, CSA-C22.2 No.14 (UL File No.E215660) 0.31kg EN61000-6-4, EN61000-6-2 Measured at 1m from the front of the Buzzer Opening EN61000-6-4 Conforms to the UKCA Requirements UL and Low Voltage Directive have been evaluated for use Rotation Flashing Rate (Typ.) 88dB 120 rpm Environmental Condition Drawing No. Rev. SKH-M1J-W18 H Page SPECIFICATIONS Operating Ambient Temperature No Buzzer 0.04A With Buzzer No Buzzer With Buzzer 3.6W Operating Ambient Humidity Mounting Direction Rated Current Consumption Rated Power Consumption SKH-M2□□-□ Max. Max. 0.23A 0.15A 2.5W 0.07A Rated Voltage Indoor/Outdoor Product Name Rotating Beacons Operating Voltage Range Less than 90 % (No condensation) Less than 90 % (No condensation) 0.08A 0.05A 0.37kg without breaking insulation 240V AC IP65(when used with SZW-103 Rubber Gasket attachment) More than 1MΩ at 500V DC between live part IP23(Excluding Terminal Block Opening ※1) Outdoor : Upright -20℃ to +60℃ 100V AC 0.21A Conformity Standards UL EMC Directive Due to the characteristics of the LED elements, there may be a slight variation in color tone and brightness between products. 3.0W 3.3W and non-current carrying metallic part without breaking insulation SKH-M2T 0.33kg Remarks ※1 For models with Terminal Block, additional waterproofing may be required depending on operating environment. Conforms to the CE Requirements 90-250V AC Withstand Voltage Mass (Typ.) Sound Pressure Level (Typ.) SKH-M1T 0.30kg Mounting Location SKH-M1TB 24V DC12V DC 2.8W 500V AC applied for 1min between live part Model 12-24V DC 10-30V DC 2.9W 0.12A Environmental Condition SKH-M1□□-□ 100-240V AC (50/60Hz) SKH-M2TB 0.34kg 4,000V AC applied for 1min between live part KC FCC 0.34kg and non-current carrying metallic part SKH-M2JBSKH-M1JB RoHS Directive EN61000-3-2, EN61000-3-3 FCC Part15 SubpartB ClassA, ICES-003 ClassA KN61000-6-4, KN61000-6-2 Low Voltage Directive EN IEC 63000 EN61000-6-2

[2.Model Number Configuration] ■Rated Voltage• Wiring ■Buzzer ■LED Unit Color ： 12-24V DC・Cabtyre Cord (None) ： No Buzzer R ： Red ： 12-24V DC・Terminal Block B ： With Buzzer Y ： Amber ： 100-240V AC・Cabtyre Cord G ： Green ： 100-240V AC・Terminal Block B ： Blue [mm] ・Maximum Board Thickness：8 [3.Outer Dimensions] M1T PC Name Material ・ Specification PCGlobe Case

1 J B - R

Drawing No. Rev. Page SKH-M1J-W18 H

4 Terminal Block

M Applicable Wire Size Solid Wire : 0.13-1.5mm2 , Stranded Wire : AWG28-14 M2J M2T UL2464, PVC, M1J□ : AWG22×3, M2J□ : AWG18×2+AWG24×2 LCP GF, Number Nameplate φ100 141 18(13) 3-M5 (SUS) From the cord outlet 500±30 From the cord outlet 500±30 φ7.7 φ7.7 φ100 Plain Washer(M5) Nut(M5) SUS SUS 3 pcs. 3 pcs. Accessory ■SKH-M2J ■SKH-M1J ■SKH-M1J/SKH-M2J ■SKH-M1T/SKH-M2T 141 18(13) 3-M5 (SUS) Nameplate Nameplate

[3.Outer Dimensions] [mm] [mm] ・Maximum Board Thickness：8 LCP GF, Applicable Wire Size Solid Wire : 0.13-1.5mm2 , Stranded Wire : AWG28-14

2 Case PC

3 Cabtyre Cord UL2464, PVC, M1J□ : AWG22×3, M2J□ : AWG18×2+AWG24×2

Number Name Material ・ Specification

1 Globe PC

Drawing No. Rev. Plain Washer(M5) Nut(M5) SUS SUS 3 pcs. 3 pcs. Accessory ■SKH-M2JB ■SKH-M1JB Nameplate φ100 147 24(13) 3-M5 (SUS) From the cord outlet 500±30 From the cord outlet 500±30 φ7.7 φ7.7 Buzzer Opening (Models with Buzzer Only) ■SKH-M1JB/SKH-M2JB φ100 Nameplate 147 24(13) 3-M5 (SUS) Buzzer Opening (Models with Buzzer Only) Nameplate ■SKH-M1TB/SKH-M2TB

[mm] ■SKH-M1J□/SKH-M2J□ ■SKH-M1T□/SKH-M2T□ [4.Mounting Dimensional Drawing] SKH-M1J-W18 H Drawing No. Rev. Page Recommended Tightening Torque 1.4N・m Recommended Tightening Torque 1.4N・m

■SKH-M1J□ ■SKH-M2J□ ■SKH-M1T□ ■SKH-M2T□ ※For No Buzzer Models, do not require wiring. [5.Wiring Example] Drawing No. Rev. Page SKH-M1J-W18 H 【Ext ernal cont act capacit y of power supply line】 M1 M2 Current Capacit y (Is) 3A or more 1A or more 【Ext ernal cont act capacit y of signal line and buzzer line】 M1 M2 Current Capacit y (Is) 0.5A or more 0.5A or more Withst and Volt age (Vs) 35V or more 20V or more 【Fuse】 Fuse Rat ing 250V 1A