SK82 JUXING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Ultrafast reverse recovery time Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Major Ratings and Characteristics Case: JEDEC DO-214AB molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarit y : Laser band denotes cathode end V F T j max. 125 °C I F(AV) 8.0A V RRM
20 V to 100 V
I FSM 200A y Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle. SK85~86 0.50 0.55 0.70 Reverse current V R DC T A =25℃ I R Instantaneous forward voltage mA T A =100℃ 10 20 SK88~810 UNIT I F =8.0A (2) V F 0.85 V Items Test conditions Symbol Thermal resistance from junction to lead (1) R θJL SK82~83 SK84 ℃/W Operating junction and storage temperature range T T STG –65 to +125 ℃ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 200 A Voltage rate of change (rated V R ) dv/dt 10000 V/µs 60 80 100 V20 30 40 Maximum average forward rectified current I F(AV) 8.0 A 42 56 70 V Maximum DC blocking voltage V DC 60 80 100 V Maximum RMS voltage V RMS 14 21 28 35 SK86 SK88 SK810 UNIT Maximum repetitive peak reverse voltage V RRM 20 30 40 50 j Items Symbol SK82 SK83 SK84 SK85 http://www.trr-jx.com Surface Mount Schottky Rectifiers
A =25 ℃ unless otherwise noted) http://www.trr-jx.com SK82~SK810 Surface Mount Schottky Rectifiers
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . I FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general during the lifespan of the device. T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this specification to improve reliability,functional characteristics,or design without notice. Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification. Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com SK82~SK810 Surface Mount Schottky Rectifiers