SK280MB10 SEMIKRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
© by SEMIKRON Rev. 1.0 24.09.2020 1 SEMITOP® 3 MB Half-Bridge (MOSFET module) SK280MB10 Features* One screw mounting module Low inductive design Heat transfer and isolation through direct copper bonded aluminium oxide ceramic (DCB) 100V Trench MOS technology UL recognized file no. E 63 532 Typical Applications Switched Mode Power Supplies Remarks Recommended driving for optimal switching performances: VGS=0/10V Absolute Maximum Ratings Symbol Conditions Values Unit MOSFET 1 VDSS 100 V ID Tj = 175 °C Ts = 25 °C 335 A Ts = 70 °C 280 A IDM 960 A IDRM 320 A VGS -20 ... 20 V Tj -40 ... 175 °C Integrated body diode IFM 960 A IFRM 320 A Absolute Maximum Ratings Symbol Conditions Values Unit Module It(RMS) ∆Tterminal at PCB joint = 30 K, per pin 60 A Tstg -40 ... 125 °C Visol AC, sinusoidal, t = 1 min 2500 V Characteristics Symbol Conditions min. typ. max. Unit MOSFET 1 V(BR)DSS VGS = 0 V, I D = 1 mA, T j = 25 °C 100 V VGS(th) VDS = V GS, ID = 0.55 mA, T j = 25 °C 2 2.7 3.5 V IDSS VGS = 0 V, V DS = 100 V, Tj = 25 °C 0.2 mA IGSS VDS = 0 V, V GS = 20 V, T j = 25 °C 200 nA RDS(on) VGS = 10 V ID = 200 A chiplevel Tj = 25 °C 1.15 1.35 m Ω Tj = 150 °C 2.1 m Ω Ciss VGS = 0 V, V DS = 50 V, f = 1 MHz 22200 pF Coss VGS = 0 V, V DS = 50 V, f = 1 MHz 3880 pF Crss VGS = 0 V, V DS = 50 V, f = 1 MHz 138 pF RGint Tj = 25 °C 4 Ω QG VGS= 0 +15 V, VDD = 50 V, ID = 200 A 530 nC td(on) VDD = 50 V VGS = 15/0 V ID = 200 A RG on/off = 15 Ω di/dtoff = 1.6 kA/µs di/dton = 1.4 kA/µs dv/dt = 637 kV/µs Tj = 150 °C 190 ns td(off) Tj = 150 °C 1000 ns tr Tj = 150 °C 133 ns tf Tj = 150 °C 97 ns Eon Tj = 150 °C 0.2 mJ Eoff Tj = 150 °C 2.1 mJ Rth(j-s) per MOSFET, λpaste=0.8 W/(mK) 0.47 K/W Integrated body diode VF = VSD -ID = 200 A VGS = 0 V chiplevel Tj = 25 °C 0.88 V Tj = 150 °C 0.77 V VF0 = VSD0 chiplevel Tj = 25 °C 0.71 V Tj = 150 °C 0.53 V rF = rSD chiplevel Tj = 25 °C 0.85 m Ω Tj = 150 °C 1.20 m Ω trr VDD = 50 V -ID = 200 A di/dtoff = 1.4 kA/µs VGS = 0 V Tj = 150 °C 90 ns Qrr Tj = 150 °C 2.7 µC Irr Tj = 150 °C 60 A Err Tj = 150 °C 0.1 mJ
2 Rev. 1.0 24.09.2020 © by SEMIKRON SEMITOP® 3 MB Half-Bridge (MOSFET module) SK280MB10 Features* One screw mounting module Low inductive design Heat transfer and isolation through direct copper bonded aluminium oxide ceramic (DCB) 100V Trench MOS technology UL recognized file no. E 63 532 Typical Applications Switched Mode Power Supplies Remarks Recommended driving for optimal switching performances: VGS=0/10V Characteristics Symbol Conditions min. typ. max. Unit Module LCE 5 nH Ms to heatsink 2.25 2.5 Nm w weight 29 g
© by SEMIKRON Rev. 1.0 24.09.2020 3 Fig.1: Typ. MOSFET forward output characteristic, incl. RDD'+ SS' Fig. 2: Typ. reverse output characteristic, incl. RDD'+ SS' Fig. 3: Rated current vs. temperature ID = f (TS) Fig. 4: Typ. turn-on/-off energy E = f(ID) Fig. 5: Typ. turn-on /-off energy E= f (RG) Fig. 6: Typ. MOSFET transfer characteristic
4 Rev. 1.0 24.09.2020 © by SEMIKRON
© by SEMIKRON Rev. 1.0 24.09.2020 5 SEMITOP®3 MB
6 Rev. 1.0 24.09.2020 © by SEMIKRON This is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340. *IMPORTANT INFORMATION AND WARNINGS The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.