SK22 JUXING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Ultrafast reverse recovery time Low power losses, high efficiency Low forward voltage drop High surge capability High temperature soldering： 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Mechanical Date Major Ratings and Characteristics Case: JEDEC DO-214AA molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarit y : Laser band denotes cathode end I F(AV) 2.0A V RRM
20 V to 100 V
I FSM 50A V F T j max. 125 °C y Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle.
10000 V/µs
j Items Symbol SK22 SK23 SK24 SK25 SK26 SK28 SK210 UNIT Maximum repetitive peak reverse voltage V RRM 20 30 40 50 60 80 100 V Maximum RMS voltage V RMS 14 21 28 35 42 56 70 V Maximum DC blocking voltage V DC 20 30 40 50 60 80 25 ℃/W Voltage rate of change (rated V R ) dv/dt 100 V Maximum average forward rectified current I F(AV) 2.0 A Operating junction and storage temperature range T T STG –65 to +125 ℃ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 50 A Thermal resistance from junction to lead (1) R θJL Items Test conditions Symbol SK 22 SK23~24 SK25~26 SK28~210 UNIT Instantaneous forward voltage I F =2.0A (2) V F 0.50 0.55 0.70 0.85 V Reverse current V R DC T A =25℃ I R 0.5 mA T A =100℃ 5 http://www.trr-jx.com Surface Mount Schottky Rectifiers
A =25 ℃ unless otherwise noted) http://www.trr-jx.com SK22~SK210 Surface Mount Schottky Rectifiers
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . I FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general during the lifespan of the device. T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this specification to improve reliability,functional characteristics,or design without notice. Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification. Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com SK22~SK210 Surface Mount Schottky Rectifiers