SK146UT16TP SEMIKRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

© by SEMIKRON Rev. 1.0 – 09.11.2021 1 SEMITOP® 4 Press-Fit UT-T Antiparallel Thyristor Module SK146UT16Tp Features* • One screw mounting module • Solder free mounting with Press-fit terminals • Fully compatible with other SEMITOP® Press-Fit types • Improved thermal performances by aluminium oxide substrate • Integrated NTC temperature sensor • Glass passivated thyristor chips • Up to 1600V reverse voltage • UL recognized, file no. E 63 532 Typical Applications • Soft starter • Light control (studios, theater) • Temperature control Absolute Maximum Ratings Symbol Conditions Values Unit Thyristor 1 IT(AV) sin. 180° Ts = 25 °C 78 A Ts = 70 °C 53 A ITSM 10 ms Tj = 25 °C 1100 A Tj = 130 °C 1000 A i2t 10 ms Tj = 25 °C 6050 A²s Tj = 130 °C 5000 A²s VRRM 1600 V VDRM 1600 V (di/dt)cr Tj = 130 °C 50 A/µs (dv/dt)cr Tj = 130 °C 1000 V/µs Tj -40 ... 130 °C Absolute Maximum Ratings Symbol Conditions Values Unit Module It(RMS) ∆Tterminal at PCB joint = 30 K, per pin 35 A Tstg module without TIM -40 ... 125 °C Visol AC, sinusoidal, t = 1 min 2500 V Characteristics Symbol Conditions min. typ. max. Unit Thyristor 1 VT IT = 80 A chiplevel Tj = 25 °C 1.26 V Tj = 130 °C 1.20 V VT(TO) chiplevel Tj = 25 °C 0.95 V Tj = 130 °C 0.85 V rT chiplevel Tj = 25 °C 3.8 m Ω Tj = 130 °C 4.4 m Ω IDD;IRD Tj = 130 °C, V DD = VDRM; VRD = VRRM 9 mA tgd Tj = 25 °C, I G = 1 A, di G/dt = 1 A/µs 1 µs tgr VD = 0.67 * VDRM 2 µs tq Tj = 130 °C 150 µs IH Tj = 25 °C 220 mA IL Tj = 25 °C, R G = 33 Ω 440 mA VGT Tj = 25 °C, d.c. 1.98 V IGT Tj = 25 °C, d.c. 100 mA VGD Tj = 130 °C, d.c. 0.25 V IGD Tj = 130 °C, d.c. 6 mA Rth(j-s) per thyristor, λpaste=0.8 W/(mK), sin. 180° 0.8 K/W Characteristics Symbol Conditions min. typ. max. Unit Module Ms to heatsink 2.5 2.75 Nm w weight 60 g

2 Rev. 1.0 – 09.11.2021 © by SEMIKRON SEMITOP® 4 Press-Fit UT-T Antiparallel Thyristor Module SK146UT16Tp Features* • One screw mounting module • Solder free mounting with Press-fit terminals • Fully compatible with other SEMITOP® Press-Fit types • Improved thermal performances by aluminium oxide substrate • Integrated NTC temperature sensor • Glass passivated thyristor chips • Up to 1600V reverse voltage • UL recognized, file no. E 63 532 Typical Applications • Soft starter • Light control (studios, theater) • Temperature control Characteristics Symbol Conditions min. typ. max. Unit Temperature Sensor R100 Tr = 100 °C 493 ± 5% Ω ±2% K

© by SEMIKRON Rev. 1.0 – 09.11.2021 3 Fig. 1: Power dissipation per module vs. rms current Fig. 2: Typ. transient thermal impedance Fig. 5: Gate trigger characteristic

4 Rev. 1.0 – 09.11.2021 © by SEMIKRON SEMITOP 4 Press-Fit UT-T

© by SEMIKRON Rev. 1.0 – 09.11.2021 5 This is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340. *IMPORTANT INFORMATION AND WARNINGS The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.