SK120GAL12F4T SEMIKRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
© by SEMIKRON Rev. 2.0 01.09.2021 1 SEMITOP® 3 GAL Boost Chopper SK 120 GAL 12F4 T Features* One screw mounting module Low inductive design Heat transfer and insulation through direct copper bonded aluminum oxide ceramic (DBC) 1200V Trench4 IGBT (F4) Robust and soft switching freewheeling diode CAL4F Integrated NTC temperature sensor UL recognized, file no. E 63 532 Typical Applications Solar UPS Energy Storage Systems Remarks Chopper Diode: antiparallel diode Absolute Maximum Ratings Symbol Conditions Values Unit Chopper IGBT VCES Tj = 25 °C 1200 V IC Tj = 175 °C Ts = 25 °C 134 A Ts = 70 °C 109 A ICnom 120 A ICRM 240 A VGES -20 ... 20 V tpsc VCC = 800 V VGE ≤ 15 V VCES ≤ 1200 V Tj = 150 °C 10 µs Tj -40 ... 175 °C Chopper Diode VRRM Tj = 25 °C 1200 V IF Tj = 175 °C Ts = 25 °C 60 A Ts = 70 °C 47 A IFRM - A IFSM 10 ms, sin 180°, Tj = 150 °C 270 A Tj -40 ... 175 °C Freewheeling Diode VRRM Tj = 25 °C 1200 V IF Tj = 175 °C Ts = 25 °C 148 A Ts = 70 °C 117 A IFRM 240 A IFSM 10 ms, sin 180°, Tj = 150 °C 774 A Tj -40 ... 175 °C Module It(RMS) ∆Tterminal at PCB joint = 30 K, per pin 60 A Tstg module without TIM -40 ... 125 °C Visol AC, sinusoidal, t = 1 min 2500 V Characteristics Symbol Conditions min. typ. max. Unit Chopper IGBT VCE(sat) IC = 120 A VGE = 15 V chiplevel Tj = 25 °C 2.05 2.40 V Tj = 150 °C 2.59 2.85 V VCE0 chiplevel Tj = 25 °C 0.80 0.90 V Tj = 150 °C 0.70 0.80 V rCE VGE = 15 V chiplevel Tj = 25 °C 10 13 m Ω Tj = 150 °C 16 17 m Ω VGE(th) VGE = VCE, IC = 4.5 mA 5.2 5.8 6.4 V ICES VGE = 0 V, V CE = 1200 V, Tj = 25 °C - 1.6 mA Cies VCE = 25 V VGE = 0 V f = 1 MHz 6.90 nF Coes f = 1 MHz 0.56 nF Cres f = 1 MHz 0.41 nF QG VGE = - 15 V...+ 15 V 840 nC RGint Tj = 25 °C 1.6 Ω
2 Rev. 2.0 01.09.2021 © by SEMIKRON SEMITOP® 3 GAL Boost Chopper SK 120 GAL 12F4 T Features* One screw mounting module Low inductive design Heat transfer and insulation through direct copper bonded aluminum oxide ceramic (DBC) 1200V Trench4 IGBT (F4) Robust and soft switching freewheeling diode CAL4F Integrated NTC temperature sensor UL recognized, file no. E 63 532 Typical Applications Solar UPS Energy Storage Systems Remarks Chopper Diode: antiparallel diode Characteristics Symbol Conditions min. typ. max. Unit Chopper IGBT td(on) VCC = 600 V IC = 120 A RG on = 1.5 Ω RG off = 1.5 Ω di/dton = 3200 A/µs di/dtoff = 1900 A/µs VGE = +15/-15 V dv/dt = 1990 V/µs Tj = 150 °C 98 ns tr Tj = 150 °C 31 ns Eon Tj = 150 °C 13.9 mJ td(off) Tj = 150 °C 306 ns tf Tj = 150 °C 46 ns Eoff Tj = 150 °C 9 mJ Rth(j-s) per IGBT, λpaste=0.8 W/(mK) 0.35 K/W Chopper Diode VF = VEC IF = 13 A chiplevel Tj = 25 °C 0.97 1.20 V Tj = 150 °C 0.84 1.07 V VF0 chiplevel Tj = 25 °C 0.89 1.09 V Tj = 150 °C 0.73 0.92 V rF chiplevel Tj = 25 °C 6.2 8.5 m Ω Tj = 150 °C 8.8 12 m Ω IRRM IF = 13 A - A Qrr - µC Err - mJ Rth(j-s) per Diode, λpaste=0.8 W/(mK) 1.5 K/W Freewheeling Diode VF = VEC IF = 150 A chiplevel Tj = 25 °C 2.17 2.49 V Tj = 150 °C 2.11 2.42 V VF0 chiplevel Tj = 25 °C 1.30 1.50 V Tj = 150 °C 0.90 1.10 V rF chiplevel Tj = 25 °C 5.8 6.6 m Ω Tj = 150 °C 8.1 8.8 m Ω IRRM IF = 120 A di/dtoff = 3200 A/µs VGE = -15 V VR = 600 V Tj = 150 °C 112 A Qrr Tj = 150 °C 21 µC Err Tj = 150 °C 7.7 mJ Rth(j-s) per Diode, λpaste=0.8 W/(mK) 0.45 K/W Module LCE - nH RCC'+EE' Ts = 25 °C - m Ω Ts = 150 °C - m Ω Ms to heatsink 2.25 2.5 Nm Mt - Nm - Nm w 29 g Temperature Sensor R100 Tc=100°C (R25=5 kΩ) 493 ± 5% Ω ±2% K
© by SEMIKRON Rev. 2.0 01.09.2021 3 Fig. 1: Typ. IGBT output characteristic, inclusive RCC'+ EE' Fig. 2: IGBT rated current vs. temperature Ic=f(Ts) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. IGBT transfer characteristic Fig. 6: Typ. gate charge characteristic
4 Rev. 2.0 01.09.2021 © by SEMIKRON Fig. 11: Typ. diode peak reverse recovery current Fig. 12: Typ. Diode reverse recovery charge
© by SEMIKRON Rev. 2.0 01.09.2021 5 SEMITOP®3 GAL-T
6 Rev. 2.0 01.09.2021 © by SEMIKRON This is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340. *IMPORTANT INFORMATION AND WARNINGS The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.