SHSMG1010 SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

  • 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 2049, REV. - Formerly part number –SHSMG1010

1000 VOLT, 50 AMP IGBT DEVICE

HIGH SPEED, LOW VCE IGBT ELECTRICAL CHARACTERISTICS (Tj=250C UNLESS OTHERWISE SPECIFIED) PPAARRAAMM EETTEERR SSYYMMBBOOLL MMIINN TTYYPP MMAAXX UUNNIITT IGBT SPECIFICATIONS Collector to Emitter Breakdown Voltage IC = 3 mA, VGE = 0V BVCES 1000 - - V Continuous Collector Current TC = 25 OC TC = 90 OC IC - - 50 A Pulsed Collector Current, 1mS ICM - - 100 A RBSOA VGE = 15V, VCE = 800V, Tj = 125 OC L = 100 uH, Clamped Inductive Load ICM - - 50 A Gate to Emitter Voltage VGE - - +/-20 V Gate-Emitter Leakage Current, VGE = +/-20V IGES - - +/- 100 nA Gate Threshold Voltage, IC= 0.25 mA, VCE = VGE VGE(TH) 2.5 - 5.0 V Zero Gate Voltage Collector Current VCE = 800 V, VGE=0V Ti=25oC VCE = 800 V, VGE=0V Ti=125oC ICES - 0.25 1.0 mA mA Collector to Emitter Saturation Voltage, TC = 25 OC IC = 25A, VGE = 15V, TC = 125 OC VCE(SAT) - 3.5 3.8 4.0 4.5 V Input Capacitance Output Capacitance Reverse Transfer Cap. VCE = 25 V, VGE = 0 V, f = 1 MHz Cies Coes Cres - 2750 200 - pF Turn On Delay Time Rise Time Turn Off Delay Time Fall Time Turn off Energy Loss Tj = 125 OC, IC = 25A, VGE = 15V, inductive load, VCE = 800 V, RG = 33 Ω td(on) tr td(off) tf Eoff Eon 100 250 720 800 8.0 3.5 nsec mJ mJ Maximum Thermal Resistance Rθ JC - - 0.60 oC/W SHD739601

  • 221 West Industry Court 3 Deer Park, NY 11729 3 (631) 586 7600 FAX (631) 242 9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 2049, REV. - Mechanical Dimensions: In Inches / mm .785±.005 (19.94±.127) .257±.003 (6.53±.076)

2 Places

.080±.003 (2.032±.076) .594±.009 (15.09±.229) .487±.003 (12.37±.076) .200±.003 (5.08±.076) .150±.007 (3.81±.178) .020±.002 (.508±.0508) .090±.003 (2.286±.0762) .040±.002 (1.016±.0508) SHD-6 Schematic Diagram SHD739601 E C G

  • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
  • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.