SHS-700-6012-BLK PROPOWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> V1.017/08/12 Heat Shrink Tubing Typical Properties Physical Tensile Strength : 1,900 PSI Ultimate Elongation : 400% Longitudinal Change : +1, -10% Secant Modulus (2%) : 33,000 PSI *Heat Aging Elongation 175% (336 hrs @ 175°C) *Heat Shock No dripping, cracking. Passes mandrel wrap test (4 hrs @ 250°C) *Low Temperature Flexibility (4 hrs @ -55°C) No Cracking Flammability Self extinguishing Operating Temperature -55°C to 110°C (-67°F to 230°F) Flexibility* : 7 Shrinkage : 4:1 Shrink Temperature : 121°C(250°F) Colour : Clear Electrical Dielectric Strength : 700V/Mil Volume Resistivity : 1014 ohm-cm *Outer wall only *Flexibility : The materials are rated on a scale of 1 ~ 10. 1 = most flexible and 10 = most rigid Description: The SHS series is a semi-rigid tubing offering the advantages of integral, Adhesive-lined constriction. The tubing is made from flame-retardant, flexible polyolefin with an internal layer of special thermoplastic adhesive.
www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> V1.017/08/12 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. © Premier Farnell plc 2012. Part Number Table
Description
Dimensions Standard Packages Size (Inch) Expanded I.D. Min. (Inch) Recovered I.D. Max. (Inch) Recovered Nominal Melt Wall Nom. (Inch) Recovered Nominal Wall Thickness (Inch) 4 Foot Lengths (+1″, -0″,) 6 Inch Lengths (± .125″) Part Number Qty Total Footage (Feet) Part Number Qty Total Footage (Feet) SHS-Series Adhesive Lined Semi-Rigid Heat Shrink Tubing 12 48 SHS-300-6022-BLK 22 11