DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0178A DOC Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number / Ordering Information 1/ L L L L Screening2/ = None TX = TX Level TXV = TXV Level S = S Level Package ____ = Axial SMS = Surface Mount Square Tab Recovery Time UF = Ultra Fast Voltage 25 = 2500 30 = 3000 40 = 4000 50 = 5000 60 = 6000 SHR25UF – SHR60UF and SHR25UFSMS – SHR60UFSMS 500 mA 2500 ─ 6000 VOLTS 60 nsec HIGH VOLTAGE RECTIFIER FEATURES:  High Current Replacement for SHM diode series  Ultra Fast Recovery: 60nsec Maximum  PIV to 6000 Volts  Hermetically Sealed  Void-Free Construction  Metallurgically Bonded  175°C Maximum Operating Temperature  Higher voltages available – contact factory  Standard, fast, and hyper fast reverse recovery versions available – contact factory  TX, TXV, and Space Level Screening Available2/

ELECTRICAL CHARACTERISTICS

Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance Symbol PIV I 0 IR @ PIV VF 4/ IFSM trr C J JE JL Units Volts mA A Volts Amps nsec pF °C/W Conditions 25°C 100°C 8/ 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ L = 3/8” Axial @ TL SMS @ TEC SHR25UF 2500 500 350 450 1.0 15 8.5 25 60 6 15 35 SHR30UF 3000 500 350 450 1.0 15 8.5 25 60 6 15 35 SHR40UF 4000 500 350 450 1.0 15 8.5 25 60 6 15 35 SHR50UF 5000 400 250 350 1.0 15 11.5 25 60 4 15 35 SHR60UF 6000 400 250 350 1.0 15 11.5 25 60 4 15 35 Higher Voltages Available – Contact Factory 1/ For ordering information, price, operating curves, and availability – Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. Instantaneous forward voltage measured @ 25°C rated Io pulsed 5/ Max. End Tab temp. for soldering is 250°C for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=500mA, IR=1000mA, IRR=250mA, TA=25°C. 8/ Derate Io current linearly from 25°C to 100°C and from 100°C to 175°C Axial Leaded SMS

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0178A DOC SHR25UF – SHR60UF and SHR25UFSMS – SHR60UFSMS Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com PACKAGE OUTLINE: Dimensions Min Max Axial Lead B ØC ØADD A --- .135 B ( SHR25 – 40) .195 .225 B ( SHR50 – 60) .210 .240 C .028 .031 D 1.000 --- Surface Mount Square Tab A .132 .140 B ( SHR25 – 40) .240 .280 B ( SHR50 – 60) .255 .335 C .025 .033 D .002 ---