SHD724401 SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600 FAX (631) 242 9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1006, REV. - Formerly part number –SHSMG1009

600 VOLT, 40 AMP IGBT DEVICE

HIGH SPEED, IMPROVED SCSOA ELECTRICAL CHARACTERISTICS (Tj=250C UNLESS OTHERWISE SPECIFIED) PPAARRAAMMEETTEERR SSYYMMBBOOLL MMIINN TTYYPP MMAAXX UUNNIITT IGBT SPECIFICATIONS Collector to Emitter Breakdown Voltage IC = 250 μA, VGE = 0V BVCES 600 - - V Continuous Collector Current TC = 25 OC TC = 90 OC IC - - 40 (1) A Pulsed Collector Current, 1mS ICM - - 130 A Short Circuit time, VGE = 15V, VCE = 500V, Tj = 125 OC di/dt < 300 A/sec, IC< 300A tsc - - 10 sec Gate to Emitter Voltage VGE - - +/-20 V Gate-Emitter Leakage Current, VGE = +/-20V I GES - - +/- 100 nA Gate Threshold Voltage, IC=2mA V GE(TH) 4.0 - 7.0 V Zero Gate Voltage Collector Current VCE = 600 V, VGE=0V Ti=25oC VCE = 480 V, VGE=0V Ti=125oC ICES 0.25 3.0 Ma mA Collector to Emitter Saturation Voltage, TC = 25 OC IC = 40A, VGE = 15V, TC = 125 OC VCE(SAT) - 2.0 2.3 2.3 2.5 V Input Capacitance Output Capacitance Reverse Transfer Cap. V CE = 25 V, VGE = 0 V, f = 1 MHz Cies Coes Cres - 2800 300 200 - pF Turn On Delay Time Rise Time Turn Off Delay Time Fall Time Turn off Energy Loss j = 125 OC, IC = 40A, V GE = 15V, inductive load, V CC =

300 V, RG = 22 Ω

td(on) tr td(off) tf Eoff Eon 100 300 1.5 2.0 nsec mJ mJ Maximum Thermal Resistance RθJC - - 0.60 oC/W (1) Current is limited by package leads. Die current rating is 65A. (2) Current is limited by package leads. Die current rating is 75A. (3) Current is limited by package leads. Die current rating is 50A. SHD724401

  • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600 FAX (631) 242 9798 •
  • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • TECHNICAL DATA DATA SHEET 1006, REV. - Mechanical Dimensions: In Inches / mm .785±.005 (19.94±.127) .257±.003 (6.53±.076)

2 Places

.080±.003 (2.032±.076) .594±.009 (15.09±.229) .487±.003 (12.37±.076) .200±.003 (5.08±.076) .150±.007 (3.81±.178) .020±.002 (.508±.0508) .090±.003 (2.286±.0762) .040±.002 (1.016±.0508) SHD-6 Schematic Diagram SHD724401 DISCLAIMER: 1- The information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. Before ordering, purchas ers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user’s units according to the datas heet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. E C G