SHB636053E_09 SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
  • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SEMICONDUCTOR Technical Data Datasheet 4338, Rev B HIGH VOLTAGE SILICON CARBIDE SINGLE PHASE FULL WAVE BRIDGE DESCRIPTION: 2500-VOLT, 5 AMP POWER SILICON CARBIDE SINGLE PHASE FULL WAVE BRIDGE FEATURES:
  • NO RECOVERY TIME OR REVERSE RECOVERY LOSSES
  • NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR
  • 15000-VOLT HI-POT CAPABILITY MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PEAK INVERSE VOLTAGE PIV 2500 Volts MAXIMUM DC OUTPUT CURRENT (With TC = 65 OC) WHEN USED AS A BRIDGE IO 5 Amps MAXIMUM REPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) per leg, TC = 25 OC IFRM 30 Amps MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT (t = 10μs, pulse) per leg, TC = 25 OC IFSM 100 Amps MAXIMUM POWER DISSIPATION, TC = 25 OC P d 100 W MAXIMUM THERMAL RESISTANCE, Junction to Case RθJC 0.5 °C/W MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE* Top, Tstg -55 to +200 * Note: SiC semiconductors will handle at or above this operating and storage temperature. However, extended operational use of the packaged device above 175C may reduce its future performance. All qualification testing and screening per MIL-PRF-19500 will only be performed to 175C.

ELECTRICAL CHARACTERISTICS

CHARACTERISTIC TYP MAX. UNITS MAXIMUM FORWARD VOLTAGE DROP (If = 5 A PER LEG) Vf TJ=25 °C TJ=150 °C 7.5 5.50 9.00 Volts MAXIMUM REVERSE CURRENT (2500V PIV PER LEG) Ir TJ = 25 °C TJ = 150 °C 0.05 0.10 0.40 2.00 mA JUNCTION CAPACITANCE (Vr =5V) per leg CT 240 pF TOTAL CAPACITANCE CHARGE (VR=2500V, IF=5A, di/dt=500A/μs and TJ=25°C) QC per leg

28 N/A nC

  • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
  • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON Technical Data Datasheet 4338, Rev B MECHANICAL DIMENSIONS (inches) Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche capabilities of the device are limited. Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. SHB636053E DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to impr ove product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that featur e assured safety or by means of users’ f ail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user’s units according to the datasheet(s). Sensitron Se miconductor assumes no responsibility for any intellectual property claims or any ot her problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. DC+ DC- AC1 AC2