SHA489 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Solid State Devices, Inc.

14830 Valley View Blvd * La Mirada, Ca 90638

Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet FEATURES:

  • Power Dissipation 1 kW @ 25oC Case
  • Extremely Large SOA
  • Ultra Fast Switching, ts = 100 ns typical (Outperforms IGBT)
  • OFHC Copper Package
  • Ideal for Motor Control/Power Systems
  • Extremely Low RθJC: 0.1oC/W
  • Can Be Driven From Low Level Logic
  • Higher Current and Voltages Available. Consult Factory
  • Alternate Packages Available. Consult Factory.
  • TX, TX-V, and S-Level Screening Available. Consult Factory. SHA489 IGBT REPLACEMENT ULTRA FAST SWITCHING DEVICE

200 Amps

250 Volts

1000 Watts

MAXIMUM RATINGS Symbol Value Units Output Voltage (Collector – Emitter) V3-1 250 V Out/In Isolation (Collector – Gate) V3-2 250 V Input Voltage (Gate – Emitter) V2-1 ±20 V Current Sink Capabilities (peak) I3 200 A Input Current (transistor switched off)* I2 -5 A Total Device Power Dissipation @ TC = 25ºC Derate above 75ºC PD 1000 W W/ºC Storage Temperature T stg -55 to +150oC ºC THERMAL CHARACTERISTICS Symbol Value Units Thermal Resistance (Junction – Case) Power Section RθJC 0.1 ºC/W ELECTRICAL CHARACTERISTICS Symbol Min Max Units Output Breakdown (Collector – Emitter) (I3 = 10 mA, V2-1 = -4 V) BV3-1 250 –– Volts Out/In Isolation (Collector – Gate) (I3 = 300 µA, I1 = 0 V) BV3-2 250 –– Volts Input Breakdown Voltage (I1 = -100 µA, I3 = 0 V) (I1 = 100 µA, I3 = 0 V) BV2-1 19 –– Volts Output Leakage Current (V2-1 = -4 V, V3-1 ≤ 250 V) I3 –– 5 mA NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0020A DOC

ELECTRICAL CHARACTERISTICS Symbol Min Max Units Saturation Voltage (I3 = 100 ADC, V2-1 = 12 V)* (I3 = 200 ADC, V2-1 = 12 V) V3-1 (SAT) 3.2 7.0 1.6 Volts Output Reverse Recovery (IF = I3 = 0.5 A, IR = I3 = -1 A, to IRR = I3 = 0.25 A) trr –– 70 ns Capacitance Output (V3-1 = 10 V, V2-1 = -4 V) Input (V3-1 = 0 V, V2-1 = 0 V) C3-1 C2-1 5000 5000 pF SOA No Heatsink (I3 = 100 ADC, V2-1 = 12 V) 6 sec td On Time t (on) tr –– 500 ns Storage Time ts –– 200 ns Fall Time V3-1 = 100 VDC, I3 = 10 A Load Limited, V2-1 adjusted for 20 A I3 without load = (IB1), I2 = (IB2)= 2 A t(off) tf –– 250 ns NOTES: * Pulse Test: Pulse Width = 300 µsec, Duty Cycle = 2% 1. Maximum forward voltage measured with instantaneous forward pulse of 300 µsec minimum. 2. Unless Otherwise Specified, All Electrical Characteristics @25ºC PACKAGE OUTLINE: SHA489 Available Part Numbers SHA489 PIN ASSIGNMENT (Standard) Package Collector Emitter Gate SHA489 Pin 3 Pin 1 Pin 2 Solid State Devices, Inc. Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA489 .045